Is Your 2013 Dodge Avenger or Chrysler 200 Running Poorly?
The Engine Control Module (ECM), also known as the engine computer, is the central command center for your vehicle’s engine. It controls everything from fuel injection and ignition timing to transmission shifting and emissions systems. When it begins to fail, it can cause a cascade of frustrating and seemingly unrelated problems. If you’re dealing with a persistent Check Engine Light, erratic engine behavior, or a car that simply won’t start, a faulty ECM could be the culprit. This replacement module is the definitive solution for getting your 2.4L-equipped vehicle back on the road with reliability and confidence.
From the Diagnostic Bay
We had a 2013 Avenger come into the shop with a complaint of intermittent stalling at stoplights and a P0606 code (Internal Control Module Processor Error). The owner had already replaced the crankshaft and camshaft sensors based on advice from a parts store, but the problem persisted. After confirming power and ground to the ECM were solid, we knew the issue was internal to the module itself. Swapping in a pre-programmed unit like this one resolved all the issues instantly. It’s a classic case where chasing sensor codes can be misleading when the processor itself is the root cause.
Symptoms of a Failing 2013 Avenger Engine Computer
A failing ECM can manifest in many ways. If you’re experiencing any of the following, it’s time to consider a replacement. Look out for these common warning signs:
- ✔ Check Engine Light: The most common indicator, often with communication-related or internal processor fault codes.
- ✔ Engine Stalling or Misfiring: The engine may stall unexpectedly while driving or at idle, and you may notice rough running or misfires.
- ✔ No-Start Condition: The engine cranks but refuses to start, often due to the ECM not firing the ignition coils or fuel injectors.
- ✔ Poor Fuel Economy: An inefficiently running engine, caused by incorrect fuel and air calculations from a faulty module, will consume more gasoline.
- ✔ Harsh or Erratic Shifting: The ECM works with the transmission controller; a failing module can lead to poor shift quality in your 6-speed automatic transmission.
- ✔ Failure of Other Electronic Components: The ECM communicates with many other modules. Its failure can sometimes cause strange issues with gauges or other electronics.
A True Plug-and-Play Solution
Don’t waste time and money on a costly trip to the dealership. This engine computer is supplied specifically for your vehicle. We program the module with your vehicle’s unique VIN and mileage, ensuring that it integrates seamlessly with the existing electronics, including the security system. When it arrives, the process is straightforward: disconnect the battery, swap the old module with the new one, reconnect the battery, and start your car. No additional programming or dealer intervention is required.
Guaranteed Compatibility
This module is a direct replacement for 2013 Dodge Avenger and 2013 Chrysler 200 models equipped with the 2.4L engine and a 6-speed automatic transmission. It is compatible with a wide range of original part numbers, ensuring a perfect fit and function. Please verify your part number against the list below:
Compatible Part Numbers: 04606838AB, 04606838AC, 05094956AA, 05094956AB, 05094956AC, 05094956AE, 68164368AA, 68164368AB, 68164368AC, 68164368AD, 68164368AE, 68164367, 68164366, 68164365, 68164364
Frequently Asked Questions
Is this unit truly plug-and-play?
Yes. We program the module using the VIN you provide during checkout. This programming includes the necessary security information (SKIM) so it will start and run in your vehicle without any additional steps. Simply install it, and you’re ready to go.
Do I need to have my old module to order this?
No, you do not need to send us your old module. This is not a repair service. We send you a fully functional, programmed replacement part. There is no core charge or need to return your old, faulty unit.
Where is the ECM located on a 2013 Dodge Avenger?
On the 2013 Dodge Avenger with the 2.4L engine, the Engine Control Module is typically located in the engine bay, mounted to the firewall or inner fender. It will be a metal box with several large electrical connectors. Always disconnect the vehicle’s battery before attempting to remove or install the ECM.
Will this fix my specific problem?
This module will correct issues directly caused by a faulty ECM. While the symptoms listed above are common indicators of ECM failure, it’s crucial to have your vehicle properly diagnosed. Problems with wiring, sensors, or other modules can sometimes mimic ECM failure. This part is intended to replace a confirmed-bad engine computer.
What information do you need from me?
To ensure proper programming, we require your vehicle’s 17-digit Vehicle Identification Number (VIN) at the time of purchase. This allows us to load the correct software and security keys for your specific car.