Restore Your Vehicle’s Electrical Functions with a Plug-and-Play BCM
If your 2013-2017 GMC Terrain is plagued by bizarre electrical problems like flickering lights, malfunctioning power windows, intermittent wipers, or a key fob that works one minute and not the next, a failing Body Control Module (BCM) is the most likely culprit. The BCM acts as the central hub for your vehicle’s body electronics, and when it starts to fail, it can cause a cascade of frustrating and seemingly unrelated issues. This isn’t just an inconvenience; it can affect vehicle security and safety. Our professional programming service provides a reliable, direct-fit solution to get your vehicle back in perfect working order without the exorbitant costs and hassle of a dealership visit.
Is Your Body Control Module Failing?
A failing BCM can manifest in numerous ways. Look for these common symptoms to confirm your diagnosis before ordering:
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
- ✔ Malfunctioning keyless entry and security system.
- ✔ Instrument cluster warning lights illuminating without cause (e.g., ABS, Airbag, Traction Control).
- ✔ Wipers or radio turning on and off by themselves.
- ✔ A parasitic battery drain that leaves you with a dead battery.
- ✔ Communication errors with other vehicle modules when scanned with a diagnostic tool.
The Simple, No-Hassle Programming Solution
Forget about towing your vehicle to a dealer and paying for expensive programming and key relearning procedures. Our service is designed to be as straightforward as possible. We transfer the critical data from your original, failing BCM directly onto this replacement unit. This cloning process ensures that the replacement module is a perfect electronic match for your vehicle’s specific VIN and options. The result is a true plug-and-play component that restores full functionality right out of the box.
Here’s how it works:
- Place Your Order: Complete your purchase through our secure checkout.
- We Contact You: We will reach out with clear, simple instructions for shipping your original BCM to our facility.
- Ship Your Original BCM: Package your module securely and send it to us.
- We Program Your Part: Upon arrival, our technicians will professionally transfer all necessary data to the replacement module, typically within 1-2 business days.
- Receive Your Solution: We ship the ready-to-install BCM back to you with tracking information. Installation is as simple as disconnecting the old part and plugging in the new one.
Post-Installation Checks for Your 2013-2017 Terrain BCM
Because our module is cloned from your original, most vehicles will not require any additional procedures. However, in some cases, certain systems may need to be re-synced. Please be aware of the following potential post-installation steps:
- Airbag System Sync: If the airbag warning light is illuminated after installation, it means the new BCM needs to be synchronized with the vehicle’s Sensing and Diagnostic Module (SDM). A professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure. This is a simple sync that resolves the light.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to clear any related trouble codes. This is also performed with a capable diagnostic tool.
Guaranteed Fitment for Multiple GM Models
This BCM is a direct replacement for several part numbers and fits a wide range of General Motors vehicles. Please verify your part number is on this list before ordering. This part will fit these makes and models with these options:
- Part Numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
- TERRAIN: 2013-2017 Body Control (BCM); (LH side dash)
- EQUINOX: 2013-2017 Body Control (BCM); (LH side dash)
- CRUZE: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited) Body Control (BCM); (LH kick panel)
- MALIBU: 2013 Body Control (BCM); (LH kick panel)
- VERANO: 2013-2017 Body Control (BCM); (below center of dash)
- REGAL: 2013 Body Control (BCM); (LH dash)
- ENCORE: 2013-2014 Body Control (BCM); (LH side of dash)
- TRAX: 2013-2014 Body Control (BCM); (LH side of dash)
- SRX: 2013 Body Control (BCM); (LH dash)
- VOLT: 2013 Body Control (BCM); (RH engine compartment), ID 13580697 or 13586273
- SPARK: 2014-2015 Body Control (BCM); (left lower a-pillar), gasoline model
- ORLANDO: 2013-2014 Body Control (BCM); (below center console)
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer in your vehicle that manages and controls electronic accessories such as power windows, locks, lights, wipers, the security system, and more. It’s the command center for non-engine related electronics.
How does this cloning service work?
After you place your order, you ship your original BCM to us. We use specialized equipment to extract the vehicle-specific data (like VIN, key information, and option configuration) and flash it onto the replacement module. We then ship the programmed module back to you, ready for installation.
Why is this better than buying a used BCM from a junkyard?
A used BCM from another vehicle is programmed to that vehicle’s VIN and options. It will not work correctly in your car and will require expensive dealership programming to function, if it’s even possible. Our service provides a part that is electronically identical to your original, ensuring compatibility.
Will I need to have my keys reprogrammed after installation?
No. Because we clone the data from your original module, the replacement BCM will already recognize your existing keys. This is a major benefit that saves you time and money compared to other replacement options.
Where is the BCM located on my 2013-2017 GMC Terrain?
On the 2013-2017 GMC Terrain and Chevy Equinox, the BCM is typically located on the left-hand (driver’s) side of the dashboard, often behind the lower dash panel or kick panel.
What if my airbag light is on after I install the BCM?
This is a known possibility. It simply means the BCM and the airbag module (SDM) need to be re-synced. A qualified technician with a professional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.