Restore Your Vehicle’s Electrical Functions with a Plug-and-Play BCM
Is your 2013-2017 Chevrolet Equinox, GMC Terrain, or other compatible GM vehicle experiencing bizarre electrical problems? Issues like flickering lights, unresponsive power windows, a dead key fob, or a persistent security system warning are often signs of a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it fails, it can cause a wide range of frustrating and seemingly unrelated issues. This programmed Body Control Module, part number 13589197, is the definitive solution to get your vehicle’s features working correctly again without the exorbitant costs and hassle of dealership programming.
Common Symptoms of a Failing BCM
A faulty BCM can manifest in numerous ways. If you’re noticing any of the following problems, your Body Control Module is the likely culprit:
- ✔ Erratic or non-functional power windows, door locks, and mirrors.
- ✔ Interior dome lights or exterior lights staying on or not turning on at all.
- ✔ The security or anti-theft system light is illuminated, and the vehicle won’t start.
- ✔ Keyless entry remote (fob) stops working intermittently or completely.
- ✔ Dashboard warning lights appearing for no reason.
- ✔ Horn honking unexpectedly or not working when pressed.
- ✔ Wipers activating on their own or not functioning properly.
The Simple Solution: Our 2013-2017 Equinox BCM Programming Service
Replacing a BCM isn’t as simple as swapping the part. Modern vehicles require the BCM to be programmed with your specific Vehicle Identification Number (VIN) and security information. Our unique mail-in programming service eliminates this challenge. The process is straightforward: you purchase this BCM, we provide instructions to ship your original module to us, and our expert technicians transfer all the critical data from your old BCM to this replacement unit. We then ship the fully programmed, plug-and-play module back to you. This cloning process ensures that the replacement BCM is a perfect match for your vehicle, preserving all original keys and settings. No additional programming or dealer visits required.
From the Diagnostic Bay
We had a customer with a 2014 Chevy Cruze who was convinced he had a parasitic battery drain. He had replaced the battery twice, but it would still be dead every few mornings. He spent weeks pulling fuses trying to isolate the circuit. Finally, he brought it to a shop that diagnosed a faulty BCM. The module wasn’t properly entering its ‘sleep’ mode, keeping other systems powered on and slowly draining the battery overnight. A correctly programmed 2013-2017 Equinox BCM (which also fits his Cruze) solved the problem instantly. It’s a reminder that electrical gremlins often trace back to a single, central component.
Installation and Post-Install Procedures
Once you receive your programmed BCM, physical installation is typically straightforward, involving disconnecting the battery and swapping the modules. However, due to the complex integration of these systems, some vehicles may require a simple relearn procedure after installation. These do not require a trip to the dealer but may need a capable diagnostic tool.
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure proper brake light and traction control operation.
Always consult a factory service manual or a qualified technician for vehicle-specific instructions.
Guaranteed Fitment
This BCM is a direct replacement for several part numbers and fits a wide range of GM vehicles. Please verify your part number and model from the list below.
Compatible Part Numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
This part will fit these makes and models with these options
EQUINOX 13-17 Body Control (BCM); (LH side dash), body control
TERRAIN 13-17 Body Control (BCM); (LH side dash), body control
CRUZE 13 Body Control (BCM); (LH kick panel), w/o opt ATH
CRUZE 14-15 Body Control (BCM); (LH kick panel)
CRUZE 16 Body Control (BCM); (LH kick panel), VIN P (4th digit, Limited)
ENCORE 13-14 Body Control (BCM); (LH side of dash)
MALIBU 13 Body Control (BCM); (LH kick panel)
ORLANDO 13-14 Body Control (BCM); (below center console)
REGAL 13 Body Control (BCM); (LH dash)
SPARK 14-15 Body Control (BCM); (left lower a-pillar), gasoline model
SRX 13 Body Control (BCM); (LH dash)
TRAX 13-14 Body Control (BCM); (LH side of dash)
VERANO 13-17 Body Control (BCM); (below center of dash)
VOLT 13 Body Control (BCM); (RH engine compartment), ID 13580697 or 13586273
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer in your vehicle that manages and controls electronic accessories such as power windows, door locks, interior/exterior lighting, the security system, and wipers.
Why do I need to send you my original BCM?
Your original BCM contains your vehicle’s unique VIN, security codes, and key fob data. By cloning this information to the replacement unit, we make it a 100% plug-and-play part, saving you hundreds of dollars in dealership programming fees.
How long does the programming service take?
We typically program and ship your replacement BCM within 1-2 business days of receiving your original module. We will provide you with tracking information as soon as it ships.
Is this part difficult to install?
The physical installation is generally simple, requiring basic tools to access the module (often located in the driver’s or passenger’s side kick panel). The key benefit of our service is that no computer-based programming is needed on your end.
What if the airbag light comes on after I install it?
This is a known possibility. It simply means the BCM needs to be synced with the airbag module. A technician with a professional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.
Do I need to return my old BCM after installation?
No, there is no core charge for this part. After we clone the data, you can keep your original module.