2013-2016 Cruze BCM Body Control Module 13589197 Programmed

Plug-and-Play BCM Solution

Eliminate frustrating electrical problems with our pre-programmed Body Control Module. We clone the data from your original unit, so you get a simple, plug-in installation with no dealer visit required. Order today to restore your Cruze’s performance and reliability!

$249.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

Restore Full Functionality to Your Chevrolet Cruze

Is your 2013-2016 Chevrolet Cruze experiencing bizarre electrical issues? Flickering lights, malfunctioning power windows, or a security system that acts on its own are common signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it fails, it can cause a cascade of frustrating and seemingly unrelated problems. This replacement BCM, part number 13589197, is the definitive solution to get your vehicle back in perfect working order without the exorbitant costs and complexities of dealership programming.

From the Diagnostic Bay

We had a 2014 Cruze come into the shop with a classic “parasitic draw” complaint. The battery would be dead every morning. The owner had already replaced the battery and alternator to no avail. After hours of tracing circuits, we found the BCM was failing to put the interior lighting and radio circuits to sleep after the car was shut off. It was a slow, silent drain that was impossible to spot without a multimeter. A new, programmed BCM solved the problem instantly. It’s a reminder that many electrical gremlins trace back to this single, vital component.

Why Choose a Programmed 2013-2016 Cruze BCM?

A new BCM from the dealership requires expensive and vehicle-specific programming using specialized tools. Our unique cloning service completely bypasses this requirement. We transfer all the critical data—including your vehicle’s VIN, key information, and specific options—from your original BCM directly onto this replacement unit. The result is a true plug-and-play module. Simply install it, and your car will recognize it as the original, restoring all functions immediately.

Common Symptoms of a Failing BCM

  • ✔ Intermittent or non-functional power windows, door locks, or interior lights.
  • ✔ Erratic behavior from the dashboard gauges or warning lights.
  • ✔ The security system or keyless entry system malfunctioning.
  • ✔ Unexplained battery drain that leaves you with a dead battery.
  • ✔ Horn honking randomly or wipers activating on their own.
  • ✔ Communication errors with other vehicle modules, leading to various warning lights.

Our Simple Mail-In Programming Service

Getting your Cruze fixed is straightforward:

  1. Place Your Order: Complete your purchase. Ensure your contact information is accurate.
  2. We Contact You: Our team will reach out with clear instructions and a shipping address for you to send your original BCM to us.
  3. Send Us Your Module: Carefully package and ship your original BCM to our facility.
  4. We Program Your Replacement: Upon arrival, our technicians will professionally clone all data from your original module to the replacement unit.
  5. We Ship It Back: We ship your new, ready-to-install BCM back to you, typically within 1-2 business days, and provide you with tracking information.

Installation and Post-Install Considerations

Physically replacing the BCM in a 2013-2016 Cruze is typically located in the driver’s side kick panel area. While the physical swap is straightforward, please note the following potential post-installation procedures:

  • Airbag System Sync: In some cases, the airbag warning light may illuminate after installation. This indicates a sync issue between the new BCM and the airbag system’s SDM (Sensing and Diagnostic Module). A ‘Setup SDM Primary Key in BCM’ procedure will need to be performed with a professional-grade scan tool to resolve this.
  • Brake Pedal Position Relearn: A brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to keep the traction control system functioning as intended. This also requires a diagnostic tool.

Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.

Guaranteed Fitment for Multiple GM Vehicles

This 2013-2016 Cruze BCM is a direct replacement for part number 13589197 and is also compatible with the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589324, and 13589325. It fits a wide range of GM models, including:

  • CHEVROLET CRUZE: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited)
  • CHEVROLET EQUINOX: 2013-2017
  • CHEVROLET MALIBU: 2013
  • CHEVROLET ORLANDO: 2013-2014
  • CHEVROLET SPARK: 2014-2015 (gasoline model)
  • CHEVROLET TRAX: 2013-2014
  • CHEVROLET VOLT: 2013
  • BUICK ENCORE: 2013-2014
  • BUICK REGAL: 2013
  • BUICK VERANO: 2013-2017
  • CADILLAC SRX: 2013
  • GMC TERRAIN: 2013-2017

Frequently Asked Questions

What is a BCM cloning service?

Cloning is the process of reading all the essential vehicle-specific data (like VIN, security keys, and optional features) from your original BCM and writing it precisely onto the replacement module. This makes the new module an exact electronic duplicate, allowing it to work in your car without any additional programming.

Why do I need to send you my original BCM?

Your original BCM holds the unique digital fingerprint for your vehicle. We need it to extract this data to program the replacement. Without this data, the replacement module would not be able to communicate with your car’s other systems, and the vehicle would not start or run correctly.

What if my original BCM is badly damaged or unreadable?

In most cases, even with significant physical or water damage, we can still retrieve the necessary data. If we determine that your module is completely unreadable, we will contact you immediately to discuss alternative options or provide a full refund.

Is this a simple DIY installation?

The physical swap of the module is relatively simple for someone with basic mechanical skills, as it’s usually located behind the driver’s kick panel. However, as noted, some post-installation electronic procedures like an airbag sync may be required, which necessitates a professional scan tool.

How long does the entire process take?

Once we receive your original module, our programming service typically takes 1-2 business days. The total time will depend on the shipping times to and from our facility. We will provide you with tracking information for the return journey.

Year
Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2013

Make

Model

CRUZE

Brand

GM

MPN

13589197

Manufacturer Part Number

, , , , , ,

Manufacturer Warranty

1 Year

Scroll to Top