Is Your Chevrolet Trax Experiencing Bizarre Electrical Problems?
If your 2013-2014 Chevy Trax is acting possessed—with flickering lights, malfunctioning power windows, a temperamental security system, or random warning lights on the dash—the culprit is often a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s electronics, managing everything from your interior lights and door locks to your instrument cluster and security features. When it starts to fail, it can create a cascade of confusing and frustrating issues that can be difficult to diagnose.
The Simple, No-Hassle Solution for a Faulty BCM
Forget expensive trips to the dealership, towing fees, and the headache of programming a new module from scratch. We offer a streamlined, plug-and-play solution. This listing is for a replacement BCM that is professionally programmed with the exact data from your vehicle’s original module. This cloning service ensures that your replacement BCM is a perfect match, retaining all your original keys, security information, and vehicle-specific settings. The process is simple: place your order, ship us your original BCM, and we’ll send you back a fully programmed, ready-to-install replacement.
From the Diagnostic Bay
We once had a 2014 Chevy Cruze (which uses a similar BCM) come into the shop with the strangest set of symptoms. The owner complained that the radio would turn on by itself, the dome light would flicker while driving, and sometimes the car wouldn’t recognize the key fob. They had already replaced the battery and checked the alternator. After hours of chasing wires, we finally isolated the issue to the BCM. A standard replacement would have required a tow to the dealer and several hours of expensive programming. Instead, we used our cloning service. Within a day of receiving the original module, we had a programmed replacement ready. The customer installed it in their driveway in under 30 minutes, and every single electrical gremlin was gone. It’s a powerful fix for a complex problem.
Common Symptoms of a Failing 2013-2014 Trax BCM
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Flickering or erratic interior and exterior lights (headlights, taillights, dome lights).
- ✔ The security system or anti-theft light staying on, preventing the car from starting.
- ✔ Inaccurate or dead gauges on the instrument cluster.
- ✔ False warning lights appearing on the dashboard (e.g., ABS, Airbag, Check Engine).
- ✔ Remote keyless entry (key fob) not working correctly.
- ✔ Wipers or horn activating randomly or not working at all.
How Our Programming Service Works
Our goal is to get you back on the road as quickly and easily as possible. Here’s the process:
- Place Your Order: Purchase this BCM. Please ensure your contact information is up-to-date.
- We Contact You: We will reach out with clear, simple instructions and a shipping address for you to send your original BCM to us.
- You Ship Your Module: Carefully package and ship your original BCM to our facility.
- We Clone The Data: Upon receipt, our technicians will extract the critical data from your old module and flash it onto the replacement unit.
- We Ship It Back: We ship the fully programmed replacement BCM back to you, typically within 1-2 business days. You will receive tracking information once it’s on its way.
Installation and Post-Install Notes
Physical installation is straightforward. Simply disconnect the vehicle’s battery, locate your BCM (typically on the left side of the dash in a Trax), and swap the modules. Reconnect the battery, and your vehicle should start and run with all functions restored. In some cases, minor post-installation procedures may be needed:
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is required. This syncs the new BCM with the airbag system and must be done with a professional-grade scan tool.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure proper brake light and traction control operation.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Frequently Asked Questions
What exactly is a Body Control Module (BCM)?
The BCM is a computer in your vehicle that controls and monitors a wide range of electronic accessories not related to the engine. This includes power windows, locks, lights, wipers, security systems, and more. It acts as a central hub for these body electronics.
Why do I need to send you my original BCM?
Your original BCM contains unique security data, key programming, and vehicle-specific options (like VIN, mileage, etc.). By cloning this data to the replacement unit, we create a true plug-and-play part that will work instantly without requiring an expensive trip to the dealership for programming.
Will my existing keys work with this replacement module?
Yes! Because we are cloning all the data from your original module, the replacement unit will recognize your existing keys just like the old one did. No key reprogramming is necessary.
How long does the entire process take?
Once we receive your original module, our service is typically completed within 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with a tracking number for the return shipment.
Is this compatible with other GM vehicles?
Yes, this BCM and our programming service are compatible with a wide range of GM models, including the Equinox, Cruze, Volt, Encore, Malibu, and Terrain from similar years. Please check the part numbers and fitment list in the description to confirm compatibility.