Restore Your Vehicle’s Electrical System with a Plug-and-Play Solution
Are you battling a storm of bizarre electrical problems in your Chevrolet, Buick, or GMC? Flickering lights, malfunctioning power windows, a dashboard that lights up like a Christmas tree, or a car that refuses to start can often be traced back to a single, critical component: the Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics. When it fails, it can cause widespread and confusing issues. This listing offers a straightforward, reliable solution for your 2013-2014 Trax BCM and many other compatible GM vehicles, getting you back on the road without the exorbitant costs and hassle of dealer programming.
From the Diagnostic Bay
We had a 2014 Chevy Cruze come into the shop with a laundry list of complaints from the owner. The radio would turn on and off by itself, the turn signals worked intermittently, and the anti-theft system would randomly engage, leaving him stranded. He had already replaced the battery and checked all the fuses. After connecting our diagnostic scanner, we saw multiple communication errors pointing towards the BCM. Instead of a costly new module and hours of programming at the dealership, we performed a cloning service just like this one. By transferring the original data to a quality replacement unit, the car was back to normal in a fraction of the time and cost. It’s a perfect example of how a failing BCM can mimic a dozen other problems.
Is Your Vehicle Showing These Signs of BCM Failure?
- ✔ Intermittent or non-functional power windows, door locks, or interior lights.
- ✔ Erratic behavior from the radio, climate control, or instrument cluster gauges.
- ✔ The security or anti-theft light is on, preventing the engine from starting.
- ✔ False warnings appearing on the dashboard (e.g., ‘Service Airbag’, ‘Service StabiliTrak’).
- ✔ Turn signals or hazard lights that don’t work correctly or flash too quickly.
- ✔ Complete loss of communication with the BCM when scanned with a diagnostic tool.
- ✔ Unexplained battery drain that leaves you with a dead battery overnight.
The Simple, No-Programming-Required Process
Forget about towing your car to the dealership and waiting for expensive programming. Our professional cloning service makes this repair accessible to everyone. The process is designed for your convenience:
- Place Your Order: Complete your purchase through our secure checkout.
- We’ll Contact You: Our team will reach out to you with clear, step-by-step instructions for shipping your original BCM to our facility.
- The Magic Happens Here: Once we receive your module, our technicians will perform a full data transfer, essentially ‘cloning’ all the vital information (like VIN, key data, and vehicle options) to this replacement BCM.
- Shipped Back to You: We promptly ship the newly programmed module back to you. Once it arrives, installation is as simple as plugging it in. No further steps are needed.
Installation and Post-Install Considerations for Your 2013-2014 Trax BCM
Physically installing the BCM is typically straightforward, often located behind the driver’s side or passenger’s side kick panel or dash. While our cloning service makes the electronic side of the repair plug-and-play, some GM vehicles may require a simple relearn procedure after installation. Please be aware of the following:
- Airbag System Sync: In some cases, the airbag warning light may illuminate after the new BCM is installed. This is because the BCM and the SDM (Sensing and Diagnostic Module) need to re-establish communication. A professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the modules and clear the light.
- Brake Pedal Position Relearn: You may need to perform a brake pedal position sensor recalibration. This ensures your brake lights and traction control system function as intended. This procedure can also be completed with a compatible diagnostic tool.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Compatibility for Your Vehicle
This BCM is a direct replacement for a wide range of popular GM models. It is compatible with the following part numbers, ensuring a perfect match for your vehicle’s needs:
Part Numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
This part will fit these makes and models with these options:
- CHEVROLET CRUZE: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited)
- CHEVROLET EQUINOX: 2013-2017
- CHEVROLET MALIBU: 2013
- CHEVROLET ORLANDO: 2013-2014
- CHEVROLET SPARK: 2014-2015 (gasoline model)
- CHEVROLET TRAX: 2013-2014
- CHEVROLET VOLT: 2013
- BUICK ENCORE: 2013-2014
- BUICK REGAL: 2013
- BUICK VERANO: 2013-2017
- CADILLAC SRX: 2013
- GMC TERRAIN: 2013-2017
Frequently Asked Questions
What exactly is BCM cloning?
Cloning is a process where we extract all the vehicle-specific software and security data from your original BCM and write it directly onto the replacement module. This makes the new module an exact digital copy of the old one, allowing it to work in your car without any additional programming.
Why is this service better than buying a used BCM from a junkyard?
A used BCM from another vehicle is locked to that car’s VIN and security system. It will not work in your car without being reprogrammed by a dealer, which is often impossible or very expensive. Our service provides a module that is already programmed specifically for your vehicle.
How long does the cloning service take?
We typically complete the cloning process and ship your replacement module back out within 1-2 business days of receiving your original BCM.
What if my original BCM is water damaged or won’t communicate?
In many cases, even if the BCM is non-functional, we can still extract the necessary data from the memory chip. Please contact us before ordering if your module has severe physical or water damage so we can assess the likelihood of a successful data recovery.
Do I need any special tools for installation?
For the physical installation, you will only need basic hand tools like a socket set or screwdriver to access the BCM’s location. As mentioned, some models may require a professional scan tool for post-installation relearn procedures if a warning light appears.
Is there a core charge or do I need to return the part?
There is no core charge for this service. We only need your original module to perform the data transfer. You can keep your original module after the service is complete.