Is Your GM Vehicle Plagued by Electrical Gremlins?
If you’re experiencing bizarre and frustrating electrical issues in your Chevrolet Orlando, Cruze, Equinox, or other compatible GM model, a failing Body Control Module (BCM) is the most likely culprit. The BCM acts as the central command center for your vehicle’s body electronics, controlling everything from power windows and locks to interior lighting and the security system. When it starts to fail, it can create a cascade of problems that are often misdiagnosed, leading to costly and unnecessary repairs.
The Simple, No-Hassle Solution for BCM Failure
Forget expensive dealership visits and the complexities of programming a new module from scratch. Our professional mail-in programming service provides you with a direct-fit replacement 2013-2014 Orlando Body Control Module that is ready for installation right out of the box. We transfer the essential vehicle-specific data—including VIN, mileage, and key information—from your original BCM to this replacement unit. This cloning process ensures seamless communication with your vehicle’s other computers, making the installation truly plug-and-play.
From the Diagnostic Bay
We recently had a 2014 Chevy Cruze towed in with a classic case of BCM failure. The owner reported the dash lights were flickering like a Christmas tree, the radio would turn on and off by itself, and the key fob worked only intermittently. They had already replaced the battery to no avail. After confirming power and grounds to the BCM were good, we identified the module itself as the internal fault. Instead of a multi-day wait and a hefty bill from the dealer, we used this exact cloning service. Once the programmed module arrived, the physical swap took less than 30 minutes. The car started right up, and every single electrical issue was resolved. It’s a common problem, and this service is the most efficient fix.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Erratic dashboard lights, flickering gauges, or false warning messages.
- ✔ Malfunctioning interior or exterior lights (headlights, taillights, dome lights).
- ✔ Security system faults, anti-theft light staying on, or key fob recognition issues.
- ✔ Unexplained battery drain when the vehicle is off.
- ✔ Vehicle failing to start despite a healthy battery and starter.
How The Process Works
Our service is designed for your convenience. After you place your order, we will contact you with clear, step-by-step instructions for shipping your original BCM to our facility. Please ensure your contact information is accurate at checkout. Once we receive your module, our technicians will perform the data transfer to the replacement unit and ship it back to you promptly. You’ll receive tracking information so you can follow its journey back to your door.
Installation and Post-Install Notes
Physically installing your replacement 2013-2014 Orlando Body Control Module is straightforward. However, in some vehicles, additional synchronization procedures may be required after installation. These are simple steps for any qualified technician with a professional scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the new BCM with the airbag system.
- Brake Pedal Position Relearn: On certain models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified professional for vehicle-specific guidance.
Frequently Asked Questions
How does this programming service work?
You purchase this listing, then ship your original BCM to us. We extract the vehicle-specific data and program it into the replacement BCM. We then ship the ready-to-install module back to you. This makes it a plug-and-play solution.
Will this BCM fit other part numbers?
Yes, this module is a direct replacement for several part numbers, including 13584695, 13586273, 13580697, 13588447, 13589197, and 13589324.
Do I need to take my car to the dealer after installation?
No. Because we clone your original data, you will not need any additional programming from a dealership. This service saves you time and money.
What if my airbag light comes on after I install the BCM?
This is a known possibility. A technician will need to perform a simple ‘Setup SDM Primary Key in BCM’ procedure with a professional scan tool to sync the systems and turn off the light.
How long does the service take?
Our programming service is typically completed within 1-2 business days after we receive your original module. Shipping times will vary based on your location.
What if my original BCM is not communicating at all?
In many cases, even if the BCM is not communicating with the vehicle, we can still extract the necessary data. Please contact us with details about your module’s condition if you have concerns.