2013-2014 Orlando BCM Body Control Module 13589197

Is Your Chevrolet Orlando Experiencing Strange Electrical Problems?

The Body Control Module, or BCM, is the central nervous system of your 2013-2014 Chevrolet Orlando. It manages a vast array of non-engine related functions, from your power windows and door locks to the interior lighting, security system, and even the instrument cluster. When the BCM begins to fail, it can create a cascade of confusing and frustrating symptoms that can be difficult to diagnose. You might experience intermittent issues that seem to have no rhyme or reason, making your vehicle unreliable and unsafe.

Common Symptoms of a Failing BCM

• ✔ Intermittent or non-functional power windows, door locks, or mirrors.
• ✔ Erratic behavior from the dashboard gauges or warning lights (like the security light staying on).
• ✔ Interior or exterior lights not working correctly (staying on or not turning on at all).
• ✔ The key fob failing to lock or unlock the doors.
• ✔ Issues with the radio or climate control systems.
• ✔ A no-start condition where the engine cranks but won’t fire, often accompanied by a security system fault.

The Simple, No-Dealer Solution for Your 2013-2014 Orlando BCM

Replacing a BCM has traditionally been a complicated and expensive process, requiring a trip to the dealership for costly programming and key relearning procedures. Our unique programming service eliminates this hassle entirely. We provide a fully functional replacement BCM that is a direct, plug-and-play solution for your vehicle. By cloning the essential data from your original module onto this replacement unit, we ensure that it integrates seamlessly with your Orlando’s existing systems, including the immobilizer and key data. This means no additional programming is required upon installation.

How Our Programming Service Works:

1. ✔ Place Your Order: Complete your purchase for this BCM programming service.
2. ✔ We’ll Contact You: Our team will reach out with clear instructions and a shipping address for you to send your original BCM to us.
3. ✔ Ship Your Original Module: Carefully package and ship your original BCM to our facility.
4. ✔ We Clone the Data: Upon receipt, our technicians will expertly transfer all critical data from your original module to the replacement unit.
5. ✔ Receive Your Plug-and-Play BCM: We ship the newly programmed BCM back to you. Once it arrives, simply install it, and your vehicle’s electrical functions will be restored.

Post-Installation Procedures

While our goal is a 100% plug-and-play experience, certain vehicle systems may require a recalibration after the BCM is replaced. These are simple procedures that can often be performed by a local mechanic with a capable diagnostic tool.

• Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the new BCM with the airbag system. This is only required if the light is on.
• Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light and traction control operation.

Please note: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.

Broad Compatibility

This BCM is compatible with a wide range of General Motors vehicles. This listing is specifically for the 2013-2014 Orlando BCM, but the module itself, part number 13589197, also fits the following vehicles and part numbers:

Alternate Part Numbers: 13584695, 13586273, 13580697, 13588447, 13589324, 13589325

Compatible Models:

• EQUINOX 13-17
• VOLT 13
• CRUZE 13-16
• ENCORE 13-14
• MALIBU 13
• REGAL 13
• SRX 13
• SPARK 14-15
• ORLANDO 13-14
• VERANO 13-17
• TRAX 13-14
• TERRAIN 13-17