Is Your Chevrolet Orlando Experiencing Strange Electrical Problems?
If your 2013-2014 Chevrolet Orlando is suddenly acting possessed – with flickering lights, malfunctioning power windows, a security light that won’t turn off, or even a no-start condition – you’re likely dealing with a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, controlling everything from interior lighting and power locks to the anti-theft system. When it fails, it can cause a cascade of confusing and frustrating issues that can seem unrelated.
We recently had a customer with a 2014 Orlando that was completely dead in their driveway. The key fob wouldn’t work, the interior lights were out, and turning the key did nothing. They had it towed to a dealership, which quoted them over $1200 for a new BCM plus programming and labor. Frustrated, they found us online. They shipped us their original BCM, we performed our cloning service onto a replacement unit, and shipped it back the next day. They plugged it in, and the car started right up with all functions restored. They saved hundreds of dollars and avoided a lengthy dealership stay.
Symptoms of a Failing Body Control Module
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights staying on, flickering, or not working at all.
- ✔ The security or anti-theft light is illuminated on the dash, preventing the engine from starting.
- ✔ Inaccurate or erratic gauge cluster readings.
- ✔ Key fob not being recognized or working intermittently.
- ✔ The radio or infotainment system behaving erratically.
- ✔ A parasitic battery drain that kills your battery overnight.
The Simple, Cost-Effective Solution: Our BCM Cloning Service
Don’t pay exorbitant dealership prices for a new module and programming. Our professional cloning service is the most reliable and straightforward way to solve your BCM problems. We transfer all the critical, vehicle-specific data from your original module directly onto a replacement unit. This includes the VIN, key information, and other security parameters. The result is a true plug-and-play module that is ready for installation right out of the box, with no additional programming required.
How Our Programming Service Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We Contact You: We will reach out with clear, simple instructions for shipping your original BCM to our facility. Please ensure your contact information is up to date.
- ✔ Ship Your Module: Carefully package and send us your original BCM.
- ✔ We Clone It: Upon arrival, our technicians will professionally transfer all the data from your module to the replacement unit.
- ✔ We Ship It Back: We ship your newly programmed replacement BCM back to you, typically within one business day, and provide you with tracking information.
Guaranteed Fitment for Your 2013-2014 Orlando BCM
This service and module are a direct replacement for a wide range of GM vehicles, ensuring compatibility and proper function. It is compatible with part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. This module fits the following vehicles:
- 2013-2014 ORLANDO (Body Control, below center console)
- 2013-2017 EQUINOX (Body Control, LH side dash)
- 2013-2017 TERRAIN (Body Control, LH side dash)
- 2013-2017 VERANO (Body Control, below center of dash)
- 2013-2015 CRUZE (Body Control, LH kick panel)
- 2016 CRUZE (Body Control, LH kick panel, VIN P – Limited)
- 2013-2014 ENCORE (Body Control, LH side of dash)
- 2013-2014 TRAX (Body Control, LH side of dash)
- 2013 MALIBU (Body Control, LH kick panel)
- 2013 REGAL (Body Control, LH dash)
- 2013 SRX (Body Control, LH dash)
- 2013 VOLT (Body Control, RH engine compartment)
- 2014-2015 SPARK (Body Control, left lower a-pillar, gasoline model)
Post-Installation Procedures
While our goal is a seamless plug-and-play experience, some vehicles may require minor recalibration procedures after installation. These can typically be performed by a qualified mechanic with a professional scan tool.
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the systems. This is only required if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary for proper brake light and traction control function.
Disclaimer: Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Frequently Asked Questions
What if my original BCM is completely dead or not communicating?
In most cases, even if the BCM is failing, we can still extract the necessary data. If your module has severe water or fire damage, please contact us before ordering to discuss options.
How long does the cloning process take?
Once we receive your original module, our service is typically completed within 24-48 hours. We then ship the replacement module back to you immediately.
Do I need to send my keys with the module?
No, you do not need to send your keys. We clone all the necessary key data from your original BCM, so your existing keys will work perfectly with the replacement module.
Is this a simple DIY installation?
The physical swap of the BCM is straightforward for someone with basic mechanical skills. It’s typically located under the dash or in a kick panel. The most important step is to disconnect the vehicle’s battery before you begin.
What is your warranty on this service?
We stand by our work with a comprehensive warranty covering the programming service and the replacement module. Please see our website’s warranty page for full details.