Is Your Chevrolet Orlando Experiencing Bizarre Electrical Problems?
The Body Control Module, or BCM, is the central command center for your vehicle’s electronic accessories. It manages everything from your power windows and door locks to the interior lights, security system, and even the windshield wipers. When the BCM in your 2013-2014 Chevrolet Orlando begins to fail, it can create a cascade of frustrating and seemingly unrelated electrical issues. You might find your lights flickering, your key fob not working, or warning lights appearing on the dash for no reason. These aren’t just minor annoyances; they can compromise your vehicle’s functionality and security.
The Simple, No-Hassle Solution: A Programmed BCM
Instead of spending a fortune at the dealership for a new module and paying for expensive programming, we offer a streamlined and cost-effective solution. This listing is for a replacement BCM that is professionally programmed using the data from your original, failing module. This cloning service ensures that the replacement unit is a perfect match for your vehicle’s specific configuration, making installation a true plug-and-play experience. You get a fully functional component without the need for additional dealer visits or specialized diagnostic tools for programming.
From the Diagnostic Bay
We had a customer with a 2014 Orlando whose vehicle was acting possessed. The horn would honk randomly, the interior lights would stay on, and the power locks worked intermittently. They had already replaced the battery and checked all the fuses, but the problems persisted. After a quick diagnostic scan, we suspected the BCM. Instead of a costly replacement at the dealer, they used our cloning service. We received their old module, transferred the data to a replacement unit, and shipped it back. They installed it in under an hour, and all the phantom electrical issues were gone. It’s a common story, and it highlights how a failing BCM can mimic a dozen other problems.
Common Symptoms of a Failing 2013-2014 Orlando BCM
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
- ✔ Key fob not being recognized or working inconsistently.
- ✔ The vehicle’s security system malfunctioning or triggering falsely.
- ✔ Unexplained warning lights on the instrument cluster, such as the airbag or ABS light.
- ✔ Wipers or other electronic accessories activating on their own.
- ✔ Communication errors with other vehicle modules.
How Our BCM Programming Service Works
Our process is designed to be as simple as possible for you. Here’s how it works:
- Place Your Order: Complete your purchase through our secure checkout. Please ensure your contact information is accurate.
- We Contact You: After your order is placed, our team will reach out to you with clear, step-by-step instructions for shipping your original BCM to our facility.
- Ship Your Original Module: Carefully package and send us your vehicle’s original BCM.
- We Program Your Replacement: Once we receive your module, our technicians will extract the necessary vehicle-specific data and program it into a replacement BCM.
- Receive Your Plug-and-Play Module: We ship the newly programmed BCM back to you. You’ll receive tracking information as soon as it’s on its way. Installation is straightforward, as the module is already configured for your Orlando.
Post-Installation Procedures
While our BCMs are designed for plug-and-play installation, some GM vehicles may require minor relearn procedures after the new module is installed. These are typically simple and can sometimes be required to ensure all systems communicate correctly.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure may be needed. This syncs the airbag system with the new BCM and requires a professional-grade scan tool.
- Brake Pedal Position Relearn: In some cases, a brake pedal position sensor recalibration might be necessary to ensure proper brake light and traction control operation.
Please note: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
This BCM is a direct fit for the following part numbers:
13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
Vehicle Fitment:
This module is compatible with a wide range of GM vehicles, including:
- 2013-2014 ORLANDO
- 2013-2017 EQUINOX
- 2013-2017 TERRAIN
- 2013-2017 VERANO
- 2013-2015 CRUZE (and 2016 Cruze Limited)
- 2013-2014 ENCORE
- 2013 MALIBU
- 2013 REGAL
- 2013 SRX
- 2014-2015 SPARK
- 2013-2014 TRAX
- 2013 VOLT
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer in your vehicle that controls and monitors various electronic body functions. This includes power windows, locks, lights, wipers, the security system, and more. It acts as a central hub for these systems.
Why do I need to send you my original BCM?
Your original BCM contains critical data specific to your vehicle’s VIN, options, and key programming. By cloning this data to the replacement module, we ensure the new part is a 100% plug-and-play match, eliminating the need for expensive and complicated dealership programming.
Is this BCM difficult to install?
For most DIY mechanics, the physical installation is straightforward. The BCM in a 2013-2014 Orlando is typically located below the center console. Because our module comes pre-programmed, you just need to disconnect the battery, swap the modules, and reconnect the battery. Some minor electronic relearn procedures may be needed post-installation.
Will this fix my specific electrical problem?
This module will correct issues directly caused by a faulty BCM. Please see our list of common symptoms. If you are unsure, it is always best to have a professional technician diagnose the vehicle to confirm the BCM is the source of the problem before ordering.
What is the turnaround time for the programming service?
We pride ourselves on a fast turnaround. Typically, we program and ship your replacement module within 1-2 business days of receiving your original BCM. You will receive a tracking number as soon as it ships.