Restore Full Functionality to Your Vehicle’s Electronics
Is your 2013-2014 Buick Encore or other GM vehicle suffering from strange and unpredictable electrical problems? The Body Control Module (BCM) is the central command center for your car’s body electronics, managing everything from power windows and locks to interior lighting and security systems. When it fails, it can cause a cascade of frustrating issues that are often difficult to diagnose. This listing offers a reliable and straightforward solution: a replacement BCM, part number 13589324, that is professionally programmed using the data from your original unit.
From the Diagnostic Bay
We had a 2014 Chevy Cruze come in with the most bizarre symptoms. The owner said the dome light would randomly turn on while driving, the radio would shut off, and the power locks worked intermittently. They had already replaced the battery and checked fuses with no luck. After a quick scan, we saw multiple communication errors pointing towards the BCM. Instead of a costly trip to the dealer for a new module and programming, we performed our mail-in cloning service. We transferred the data from his old, faulty BCM to our replacement unit. He installed it in his driveway in under 30 minutes, and every single electrical gremlin was gone. It’s a prime example of how a failing BCM can mimic a dozen other problems.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and mirrors.
- ✔ Interior or exterior lights flickering, staying on, or not working at all.
- ✔ The security system acting up, causing false alarms or no-start conditions.
- ✔ Inconsistent or dead instrument cluster gauges.
- ✔ Warning lights (like the airbag or check engine light) appearing for no reason.
- ✔ Problems with the heating and A/C blower motor controls.
Why Choose Our Programmed 2013-2014 Encore BCM Service?
A new BCM from the dealership requires expensive, vehicle-specific programming. Our unique mail-in cloning service completely eliminates this step, saving you time and money. The process is simple: place your order, and we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our technicians will extract the essential vehicle-specific data and transfer it to this replacement module. We then ship the fully programmed, plug-and-play unit back to you. This ensures a seamless installation without the need for any additional calibration or dealer intervention.
Important Post-Installation Steps
While our programming service makes installation straightforward, some vehicles may require minor recalibration procedures after the BCM is installed. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This requires a professional-grade scan tool to synchronize the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure correct brake light operation and to prevent issues with the traction control system.
Guaranteed Fitment & Compatibility
This BCM is a direct replacement for several part numbers, including: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. It is compatible with a wide range of GM vehicles. Please verify your part number and check the list below to ensure compatibility with your specific model:
- ENCORE: 2013-2014
- EQUINOX: 2013-2017
- TERRAIN: 2013-2017
- CRUZE: 2013-2015, 2016 (Limited)
- MALIBU: 2013
- REGAL: 2013
- SRX: 2013
- SPARK: 2014-2015 (gasoline model)
- ORLANDO: 2013-2014
- VERANO: 2013-2017
- TRAX: 2013-2014
- VOLT: 2013
Frequently Asked Questions
How does the mail-in cloning service work?
After you purchase, we will email you instructions and a shipping address. You send us your original BCM. We then transfer its programming and security data to the replacement BCM and ship it back to you, typically within 1-2 business days of receiving your module.
Will I need a dealership to program this BCM?
No. Our service handles all the necessary programming. The module you receive will be plug-and-play, ready for installation without any dealer tools or software.
What data is transferred from my old module?
We transfer all critical vehicle-specific data, including the VIN, mileage, security keys (immobilizer), and any specific options your vehicle is equipped with. This ensures all existing keys and features work correctly.
My original BCM is damaged. Can you still clone it?
In most cases, yes. As long as the microprocessor on the circuit board is intact and we can communicate with it, we can extract the necessary data even if the module has other physical or water damage.
What if the airbag light comes on after I install it?
This is a known possibility. It simply means the BCM needs to be synchronized with the airbag module (SDM). A qualified mechanic with a high-level scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.