Restore Full Electrical Function to Your Buick Encore
Are you battling frustrating and unpredictable electrical issues in your 2013 or 2014 Buick Encore? Problems like flickering lights, malfunctioning power windows, a radio that cuts out, or even a no-start condition can often be traced back to a single component: the Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it fails, it can create a cascade of confusing symptoms. This listing offers a straightforward, professional solution: a replacement BCM, part number 13589197, that comes fully programmed with your vehicle’s original data. This eliminates the need for expensive and time-consuming dealership programming, getting you back on the road quickly and affordably.
We recently had a 2014 Encore towed in with a truly baffling set of symptoms. The owner reported that the dome lights would stay on, the turn signals worked intermittently, and the key fob would randomly stop working. A scan tool showed multiple communication errors across different systems, all pointing towards a network issue. Instead of chasing individual components, we focused on the central hub—the BCM. After confirming power and ground were good, we identified the BCM as the culprit. Using our programming service, we cloned the original module’s data to a replacement unit. The customer was able to install it at home in under an hour, and every single one of the strange electrical gremlins vanished. It’s a perfect example of how a faulty 2013-2014 Encore BCM can mimic a dozen other problems.
Is Your Buick Encore Showing These Symptoms?
- ✔ Intermittent or non-working power windows, locks, or mirrors.
- ✔ Erratic interior or exterior lighting behavior (flickering, staying on, or not turning on).
- ✔ Malfunctioning radio, climate controls, or instrument cluster gauges.
- ✔ Key fob not being recognized or working inconsistently.
- ✔ False security system alarms or anti-theft light illumination.
- ✔ Vehicle failing to start despite a good battery and starter.
- ✔ Multiple unrelated warning lights on the dashboard.
How Our Simple Programming Service Works
Our goal is to make this repair as seamless as possible. Forget about towing your car to the dealer and paying for diagnostics and programming. Our mail-in cloning service is a direct, plug-and-play solution.
- Place Your Order: Purchase this BCM service. Ensure your contact information is accurate.
- We Contact You: Our team will reach out with clear, simple instructions on how to remove and ship your original BCM to our facility.
- Data Transfer: Once we receive your module, our technicians will perform a full data transfer, cloning the VIN, key information, and vehicle-specific settings to the replacement BCM.
- Shipped Back to You: We ship the fully programmed, ready-to-install BCM back to you, typically within 1-2 business days of receiving your original. You’ll receive tracking information as soon as it’s on its way.
Technical Specifications and Compatibility
This service for a 2013-2014 Encore BCM ensures a perfect match for your vehicle’s software. By cloning your original module, we guarantee compatibility with your existing keys and security system. This part is a direct replacement for a wide range of GM vehicles and part numbers, ensuring broad applicability.
This BCM is compatible with the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325.
Fitment includes, but is not limited to:
- 2013-2017 Chevrolet Equinox
- 2013-2017 GMC Terrain
- 2013-2014 Buick Encore
- 2013-2017 Buick Verano
- 2013-2016 Chevrolet Cruze
- 2013 Chevrolet Malibu
- …and many other models listed in the fitment chart.
Installation and Post-Install Procedures
Physical installation is straightforward as this is a direct-fit replacement. However, due to the complexity of modern vehicle systems, a couple of additional steps may be required after the BCM is installed.
- Airbag System Sync: In some cases, the airbag warning light may illuminate after installation. This indicates a sync mismatch between the BCM and the SDM (airbag module). A professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.
- Brake Pedal Position Relearn: To ensure proper operation of your brake lights and traction control system, a brake pedal position sensor recalibration might be necessary. This is also performed with a capable diagnostic tool.
Please note: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Frequently Asked Questions
What exactly does the Body Control Module (BCM) do?
The BCM acts as a central computer for your vehicle’s body electronics. It controls non-engine related functions like power windows, locks, lights, wipers, the security system, and the instrument cluster.
Why do I need to send you my original BCM?
Your original BCM contains the unique Vehicle Identification Number (VIN), key fob data, and specific option configurations for your car. By cloning this data to the replacement unit, we make the new BCM plug-and-play, saving you from a costly trip to the dealership for programming.
Will I need to have my keys reprogrammed after installation?
No. Because we transfer all the data from your original module, the replacement BCM will recognize your existing keys just like the old one did.
What happens if the airbag light is on after I install the new BCM?
This is a known possibility. It requires a ‘Setup SDM Primary Key in BCM’ procedure, which syncs the airbag system to the new BCM. This must be done with a professional-grade diagnostic scan tool.
Is this a repair I can do myself?
The physical swap of the module is often simple, located under the dash on the driver’s side in most Encores. However, due to the potential need for post-installation electronic procedures (like the airbag sync), we recommend installation by a qualified technician with the proper diagnostic tools.