Restore Your Vehicle’s Electrical Brain
Are you battling a storm of bizarre electrical problems in your Buick Encore or other compatible GM vehicle? Flickering lights, malfunctioning power windows, a security system that has a mind of its own, or an engine that refuses to start can all point to a single culprit: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it starts to fail, it can create frustrating and unpredictable issues. Instead of facing a costly trip to the dealership for a new module and expensive programming, we offer a simple, reliable, and affordable solution.
This listing is for a replacement BCM, part number 13588447, that is delivered to you ready for installation. We achieve this through our professional mail-in programming service. You simply send us your original BCM, and our expert technicians will transfer all the critical vehicle-specific data—including VIN, mileage, and key information—to this replacement unit. The result is a true plug-and-play module that restores your vehicle’s functionality without any additional programming required on your end.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, and interior lights.
- ✔ Erratic behavior from the dashboard gauges or warning lights (like the airbag or security light).
- ✔ The vehicle’s security system preventing the engine from starting (no-crank condition).
- ✔ Problems with the key fob, remote start, or push-to-start systems.
- ✔ Headlights, taillights, or turn signals not working correctly.
- ✔ Battery drain caused by components not shutting down properly.
The Simple, Cost-Effective Solution for Your 2013-2014 Encore BCM
Our mail-in programming service is designed to be the easiest way to solve your BCM problems. Here’s how it works:
- Place Your Order: Complete your purchase. We will then contact you with detailed instructions and a shipping address.
- Ship Your Original BCM: Carefully remove your original BCM and ship it to us. Make sure your contact information is correct so we can coordinate smoothly.
- We Handle the Programming: Once we receive your module, our technicians will professionally transfer all necessary data to the replacement BCM. This ensures seamless integration with your vehicle’s other electronic systems.
- Receive Your Ready-to-Install Part: We ship the programmed replacement BCM back to you, typically within 1-2 business days. You’ll receive tracking information as soon as it’s on its way.
This process eliminates the need for dealership intervention, saving you hundreds of dollars in parts and labor. Because we use your vehicle’s original data, the module will be a perfect match, retaining all original features and settings.
Installation and Post-Install Procedures
Installation is straightforward: simply disconnect the battery, remove the old BCM, and install the one we send you. In most cases, no further action is needed. However, depending on your specific vehicle, a couple of minor relearn procedures may be required:
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure proper brake light and traction control function.
Please note: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Compatibility
This BCM is a direct replacement for part number 13588447 and is also compatible with the following part numbers: 13584695, 13586273, 13580697, 13589197, 13589324, and 13589325. It fits a wide range of GM vehicles, including:
- Buick Encore: 2013-2014 (LH side of dash)
- Buick Regal: 2013 (LH dash)
- Buick Verano: 2013-2017 (below center of dash)
- Cadillac SRX: 2013 (LH dash)
- Chevrolet Cruze: 2013-2015, 2016 Limited (LH kick panel)
- Chevrolet Equinox: 2013-2017 (LH side dash)
- Chevrolet Malibu: 2013 (LH kick panel)
- Chevrolet Orlando: 2013-2014 (below center console)
- Chevrolet Spark: 2014-2015 (left lower a-pillar)
- Chevrolet Trax: 2013-2014 (LH side of dash)
- Chevrolet Volt: 2013 (RH engine compartment)
- GMC Terrain: 2013-2017 (LH side dash)
Frequently Asked Questions
What is this mail-in programming service?
This service involves you sending your original BCM to us. We then extract the vehicle-specific data from it and transfer it to a replacement BCM. We then ship the programmed replacement back to you, making it ready for installation without needing a trip to the dealer.
Why is this better than buying a used BCM?
A standard used BCM from another vehicle will not work in your car because it contains the VIN and security information from the donor car. Our service ensures the replacement BCM has your car’s exact data, making it a true plug-and-play solution.
What if my original BCM is not communicating or is severely damaged?
In many cases, even if the BCM is not functioning in the vehicle, we can still retrieve the necessary data from the chip. Please contact us with details about your module’s condition before ordering if you suspect it is completely dead.
Do I need to have this programmed by a dealer after I receive it?
No. The module you receive from us is pre-programmed with your vehicle’s data. The goal of our service is to eliminate the need for any additional programming. Just install it, perform any minor relearn procedures if needed, and you’re good to go.
How long does the entire process take?
Once we receive your original module, our service is typically completed within 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with a return tracking number as soon as it ships.