Is Your Buick Encore Experiencing Strange Electrical Problems?
If your 2013-2014 Buick Encore is suddenly acting haunted—with flickering lights, malfunctioning power windows, a dead battery for no reason, or warning lights that won’t go away—you’re likely dealing with a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, managing everything from your interior lights and door locks to your security system. When it fails, it can cause a cascade of frustrating and seemingly unrelated issues, making your vehicle unreliable and difficult to drive.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Interior or exterior lights staying on, flickering, or not working at all.
- ✔ The security system acting erratically or preventing the car from starting.
- ✔ Unexplained parasitic battery drain leading to a dead battery.
- ✔ Horn honking unexpectedly or not working when needed.
- ✔ Inaccurate gauge readings on the instrument cluster.
- ✔ Warning lights (like Airbag or ABS) appearing on the dash without a clear cause.
The Simple, Plug-and-Play Solution for Your 2013-2014 Encore BCM
Forget expensive dealership visits, towing fees, and days of waiting for programming. Our professional programming service provides a straightforward and cost-effective solution. We take a replacement BCM and transfer the critical data from your original, failing module directly onto it. This ‘cloning’ process ensures the replacement unit is a perfect match for your vehicle’s specific configuration, including the VIN, mileage, and key programming. The result is a true plug-and-play module that restores full functionality without any additional programming required.
How Our BCM Programming Service Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ Ship Us Your Original BCM: We will contact you with simple instructions for shipping your original BCM to our facility. Please ensure your contact information is accurate.
- ✔ We Transfer The Data: Once we receive your module, our technicians will expertly extract the data and flash it onto the replacement BCM.
- ✔ Receive Your Plug-and-Play Module: We ship the newly programmed BCM back to you, typically within 1-2 business days. You’ll receive tracking information as soon as it’s on its way.
Installation and Potential Post-Install Procedures
Installation is as simple as disconnecting the battery, removing your old BCM, and plugging in the one we send you. In most cases, no further action is needed. However, due to the complexity of modern vehicle systems, some models may require a simple relearn procedure. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This syncs the new BCM with the airbag system and can be performed with a professional-grade scan tool.
- Brake Pedal Position Relearn: On some vehicles, a brake pedal position sensor recalibration may be needed to ensure correct brake light operation and traction control function.
Always consult a factory service manual or a qualified technician if you are unsure about any part of the installation process.
Verified Fitment and Compatible Part Numbers
This BCM is a direct replacement for several part numbers and fits a wide range of General Motors vehicles. Please verify that your original module’s part number is on this list:
Compatible Part Numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
This part will fit these makes and models with these options:
- BUICK ENCORE: 2013-2014 (Body Control, LH side of dash)
- BUICK REGAL: 2013 (Body Control, LH dash)
- BUICK VERANO: 2013-2017 (Body Control, below center of dash)
- CADILLAC SRX: 2013 (Body Control, LH dash)
- CHEVROLET CRUZE: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited) (Body Control, LH kick panel)
- CHEVROLET EQUINOX: 2013-2017 (Body Control, LH side dash)
- CHEVROLET MALIBU: 2013 (Body Control, LH kick panel)
- CHEVROLET ORLANDO: 2013-2014 (Body Control, below center console)
- CHEVROLET SPARK: 2014-2015 (gasoline model, left lower a-pillar)
- CHEVROLET TRAX: 2013-2014 (Body Control, LH side of dash)
- CHEVROLET VOLT: 2013 (ID 13580697 or 13586273, RH engine compartment)
- GMC TERRAIN: 2013-2017 (Body Control, LH side dash)
Frequently Asked Questions
What exactly do I need to send you?
You only need to ship us your original Body Control Module (BCM). After you place your order, we will provide you with the shipping address and instructions.
Is this BCM difficult to install?
No, this is a plug-and-play part. Installation typically involves disconnecting the car battery, locating the BCM (often in the driver’s or passenger’s side kick panel), unplugging the electrical connectors, removing the old module, and installing the new one. No programming is required on your end.
How long does the programming service take?
Once we receive your original module, our programming service is typically completed within 1-2 business days. We will then ship the replacement module back to you promptly.
Will my keys work with the new BCM?
Yes. Because we clone all the data from your original module, the security information for your existing keys is transferred over. Your keys will work exactly as they did before, with no need for reprogramming.
Do I need to return my old BCM after I receive the replacement?
No, there is no core charge or return required for your original module. You can keep it.