Restore Full Functionality to Your Vehicle’s Electronics
Is your 2013-2014 Chevrolet Trax experiencing bizarre electrical issues? From flickering lights and malfunctioning power windows to a no-start condition caused by a faulty security system, a failing Body Control Module (BCM) is often the culprit. The BCM acts as the central hub for your vehicle’s body electronics, managing a vast network of features that you rely on every day. When it fails, it can cause a cascade of frustrating and seemingly unrelated problems. This listing offers a straightforward, reliable solution: a replacement BCM programmed specifically for your vehicle.
Expert Pro Tip
Before condemning your BCM, always perform a full battery and charging system test. A weak battery or a faulty alternator can cause low voltage conditions that mimic BCM failure, leading to erratic behavior in your vehicle’s electronics. Also, check the main ground connections for corrosion or looseness, particularly the one from the battery to the chassis. A simple fix here can save you hundreds of dollars in unnecessary parts and labor.
Solving Issues with Your 2013-2014 Trax BCM
Instead of purchasing a blank module from a dealership and paying hundreds in programming and calibration fees, our service simplifies the entire process. We utilize a specialized cloning procedure where we transfer all the critical data from your original, failing BCM to this replacement unit. This includes the Vehicle Identification Number (VIN), security key information, and any vehicle-specific option configurations. The result is a true plug-and-play module that restores your vehicle’s factory operations without any additional programming required on your end.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-working power windows, door locks, or interior lights.
- ✔ Erratic instrument cluster behavior, with gauges dropping out or warning lights flashing unexpectedly.
- ✔ The security system acting up, preventing the vehicle from starting (anti-theft light on).
- ✔ Wipers, turn signals, or horn operating incorrectly or not at all.
- ✔ Communication errors with other modules when scanned with a diagnostic tool (U-codes).
- ✔ A/C and climate control functions failing to respond to commands.
Our Simple Programming Service Process
- ✔ Purchase this BCM: Complete your order through our secure checkout.
- ✔ We Contact You: We will reach out to you with clear instructions and a shipping address to send your original BCM to us. Please ensure your contact information is accurate.
- ✔ Ship Your Original Module: Carefully package and ship your original BCM to our facility.
- ✔ We Program the Replacement: Upon arrival, our technicians will professionally transfer all necessary data from your old module to the replacement unit.
- ✔ Receive Your Ready-to-Install BCM: We ship the programmed replacement BCM back to you, typically within 1-2 business days of receiving your original. You will receive tracking information once it ships.
Important Post-Installation Information
While our cloning service makes installation as simple as possible, some GM vehicles may require minor recalibration procedures after the BCM is reconnected. These are standard procedures and can often be performed with a high-end diagnostic scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This syncs the new BCM with the vehicle’s airbag system.
- Brake Pedal Position Relearn: In some cases, a brake pedal position sensor recalibration may be needed to ensure proper brake light and traction control functionality.
Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment for Multiple Models
This BCM is a direct replacement for part number 13584695 and is also compatible with the following part numbers: 13586273, 13580697, 13588447, 13589197, 13589324, 13589325. It fits a wide range of GM vehicles, including:
- CHEVROLET CRUZE: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited)
- CHEVROLET EQUINOX: 2013-2017
- CHEVROLET MALIBU: 2013
- CHEVROLET ORLANDO: 2013-2014
- CHEVROLET SPARK: 2014-2015 (gasoline model)
- CHEVROLET TRAX: 2013-2014
- CHEVROLET VOLT: 2013
- BUICK ENCORE: 2013-2014
- BUICK REGAL: 2013
- BUICK VERANO: 2013-2017
- CADILLAC SRX: 2013
- GMC TERRAIN: 2013-2017
Frequently Asked Questions
What is a BCM cloning service?
Cloning is a process where we transfer the essential vehicle-specific data—like the VIN, security keys, and options—from your original BCM to the replacement unit. This makes the replacement module a perfect electronic match for your car, eliminating the need for expensive dealer programming.
Is this a plug-and-play part?
Yes, once we have programmed the replacement module with your vehicle’s data, it is a plug-and-play installation. Simply disconnect the battery, swap the modules, and reconnect the battery. In some cases, minor relearn procedures may be needed as noted above.
Why is this better than buying a new BCM from a dealer?
Our service saves you significant time and money. A new BCM from a dealer comes blank and requires a visit to their service center for costly programming. Our solution arrives at your door ready to install, bypassing that extra step and expense entirely.
What happens if I have an airbag light after installation?
If the airbag light comes on, it means the BCM needs to be electronically synced with the airbag module (SDM). This is a standard GM procedure called ‘Setup SDM Primary Key in BCM’ that must be performed with a professional-grade diagnostic tool.
How long does the whole process take?
We typically program and ship the replacement BCM within 1-2 business days of receiving your original module. The total time depends on shipping transit times to and from our facility.
Do I get my original module back?
No, this service does not have a core charge, and you can keep your original module. We only need it temporarily to perform the data transfer service.