Is Your Buick Encore Experiencing Strange Electrical Problems?
If your 2013-2014 Buick Encore is suddenly acting possessed—with flickering lights, malfunctioning power windows, a dead instrument cluster, or random warning messages—you’re likely dealing with a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s electronics, controlling everything from interior lighting and security to power locks and climate functions. When it fails, it can cause a cascade of frustrating and seemingly unrelated issues.
Replacing a BCM isn’t as simple as swapping the part. A new module from the dealership requires expensive and time-consuming programming to sync with your vehicle’s specific keys, security system, and options. Our unique mail-in programming service eliminates that hassle entirely.
The Simple, Plug-and-Play Solution for Your Encore Body Control Module
We provide a straightforward and reliable fix. Instead of you facing a costly trip to the dealer, we transfer the critical data from your original BCM to a replacement unit. This cloning process ensures the replacement module is a perfect electronic match for your vehicle. The result is a true plug-and-play component that restores full functionality without any additional programming or calibration needed on your end.
From the Diagnostic Bay
We recently had a customer with a 2014 Chevy Cruze (which uses a similar BCM) who was at their wit’s end. Their radio would turn on and off by itself, the turn signals worked intermittently, and the car wouldn’t start on cold mornings. They had already replaced the battery and checked the alternator. After diagnosing the issue as a faulty BCM, they were quoted over $800 by the dealership for a new module and programming. Instead, they used our mail-in service. We cloned their original module, sent them the replacement, and they installed it in their driveway in under 30 minutes. All the bizarre electrical gremlins were gone, and the car started and ran perfectly—saving them hundreds of dollars and a major headache.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, locks, or mirrors.
- ✔ Erratic behavior from the instrument cluster gauges or warning lights.
- ✔ Headlights, taillights, or interior lights not working correctly.
- ✔ Vehicle’s security system malfunctioning or preventing the car from starting.
- ✔ Problems with the radio, climate control, or other interior accessories.
- ✔ Communication error codes stored when scanned with a diagnostic tool.
How Our Programming Service Works
The process is designed for your convenience:
- Place Your Order: Complete your purchase through our secure website.
- We Contact You: We will reach out with clear instructions on how to ship your original BCM to our facility.
- Ship Your Module: Carefully package and send us your original BCM.
- We Program Your Replacement: Upon arrival, our technicians will professionally clone all necessary data from your module to the replacement unit.
- Receive Your Ready-to-Install BCM: We ship the plug-and-play replacement BCM back to you, typically within 24-48 hours of receiving your original. Tracking information will be provided.
Fitment and Part Number Compatibility
This service and module are compatible with a wide range of General Motors vehicles. Please verify that your vehicle and original part number are listed below. This module is a direct replacement for the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325.
This part will fit these makes and models with these options:
- EQUINOX 13-17 Body Control (BCM); (LH side dash), body control
- VOLT 13 Body Control (BCM); (RH engine compartment), ID 13580697 or 13586273
- CRUZE 13 Body Control (BCM); (LH kick panel), w/o opt ATH
- CRUZE 14-15 Body Control (BCM); (LH kick panel)
- CRUZE 16 Body Control (BCM); (LH kick panel), VIN P (4th digit, Limited)
- ENCORE 13-14 Body Control (BCM); (LH side of dash)
- MALIBU 13 Body Control (BCM); (LH kick panel)
- REGAL 13 Body Control (BCM); (LH dash)
- SRX 13 Body Control (BCM); (LH dash)
- SPARK 14-15 Body Control (BCM); (left lower a-pillar), gasoline model
- ORLANDO 13-14 Body Control (BCM); (below center console)
- VERANO 13-17 Body Control (BCM); (below center of dash)
- TRAX 13-14 Body Control (BCM); (LH side of dash)
- TERRAIN 13-17 Body Control (BCM); (LH side dash), body control
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, some vehicle systems may require a relearn procedure after the BCM is reconnected. These are simple procedures for a qualified technician with a professional scan tool.
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the airbag system. This is only required if the light appears.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be necessary on some models to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Frequently Asked Questions
How does this mail-in programming service work?
After you place your order, we will provide instructions for you to ship your original BCM to us. We then copy the essential programming and security data to a replacement module and ship it back to you. The replacement you receive will be ready to install without any further programming.
Is this BCM truly plug-and-play?
Yes, because we clone the data from your original module, the replacement is electronically identical to your old one. This allows you to simply install it and have it function correctly, avoiding expensive dealer programming. In rare cases, a minor relearn procedure may be needed as noted above.
What part numbers does this module replace?
This module is a direct replacement for part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325.
What if my airbag light comes on after I install it?
If the airbag light illuminates, it simply means the BCM and the airbag module (SDM) need to be re-synchronized. A technician with a professional-grade scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.
How long does the entire process take?
We typically program and ship your replacement module within 24-48 business hours of receiving your original BCM. The total time will depend on shipping times to and from our facility.