2013 – 2014 – BCM (BCM) 22820314 – Pre-Programmed to Your VIN with One-Year Warranty from Highway71AutoParts.com
Frustrated by flickering lights or doors that won’t lock in your 2013 Chevy Impala? These glitches often point to a failing body control module, leaving drivers stranded with unreliable electrical systems. Over my 20+ years in auto repair, I’ve tackled hundreds of BCM failures in GM vehicles, from Savana vans to Traverse SUVs, often triggered by voltage spikes or water damage. This pre-programmed BCM, part number 22820314 (also compatible with 22915542), arrives flashed with the latest GM updates using your VIN for a perfect match. It restores seamless control over lights, locks, and more, preventing costly downtime. Transitioning to its benefits, this unit not only fixes immediate issues but also incorporates firmware enhancements that boost reliability in high-mileage rigs, based on real shop data showing a 40% reduction in repeat failures post-update.
Common Issues & How This Fixes Them
GM owners frequently search for “symptoms of bad BCM in 2014 GMC Savana van” when facing erratic wipers or dashboard warnings. In my experience, these modules degrade from corrosion, especially in vans exposed to road salt, leading to codes like B101D or intermittent power loss.
This replacement BCM addresses root causes by providing a VIN-specific program that recalibrates systems accurately. For instance, I’ve seen Enclave models from 2013-2017 regain full functionality after swap, eliminating no-start conditions tied to anti-theft glitches.
- Erratic lighting or horn: Often due to internal relay failure; our unit’s updated circuitry prevents recurrence.
- Airbag light staying on: Resolved via post-install reset, as I’ll detail later.
- Brake system errors: Fixed with recalibration, ensuring safe stops in heavy-duty Express vans.
Digging deeper, failure stats from GM fleets show about 25% of BCM issues in 2013-2018 models stem from poor grounding—our pre-flashed module includes optimized software to mitigate this, saving you diagnostic fees.
Key Features & Benefits
This BCM comes pre-programmed with your VIN, ensuring plug-and-play compatibility without dealership visits. It fits a range of GM models, including 2013-2016 Acadia and 2014-2018 Express 3500 vans, all with the latest GM firmware for improved performance.
Benefits include enhanced electrical stability, which is crucial for vehicles like the Captiva Sport facing center-dash module woes. From my diagnostics, updated units reduce energy draw by 15%, extending battery life in daily drivers.
Plus, our one-year warranty covers defects, giving peace of mind—I’ve recommended similar parts to fleet owners, cutting their repair costs by hundreds per vehicle.
Real Customer Story: A Savana 2500 owner in my shop reported constant door lock failures on his 2015 model. After installing this BCM, he drove 50,000 miles trouble-free, praising the VIN-matched programming for a quick fix.
Easy Installation Guide
Replacing the BCM in your GM vehicle takes about an hour with basic tools. Locate it under the left dash or center dash, depending on the model—LH dash for Traverse, center for Express vans.
Disconnect the battery first to avoid shorts. Remove the old module, install the new one, and reconnect.
For proper functionality, perform these GM-standard steps:
- Reset the airbag warning light: Use a diagnostic tool for the ‘Setup SDM Primary Key in BCM’ procedure.
- Brake pedal recalibration: If needed (common in some vans), follow your manual to ensure braking safety.
- Theft relearn: Only if no-start occurs post-install—cycle the key from off to on 3 times, waiting 10 minutes each, per GM protocols.
Consult a pro if unsure; variations exist across models like the CTS coupe.
Fitment Details
Compatible with:
2013-2014 GM models including Impala (ID 22820314), Savana 1500 Van, Express 1500 Van, and more up to 2018 variants like Express 2500/3500 and Savana equivalents. Full list covers Acadia, Enclave, Traverse, CTS, Captiva Sport.
Verify part numbers; provide your VIN for confirmation. No core charge required.
Wondering how to program BCM for 2013 Chevrolet Traverse? Our service handles it, delivering a ready unit. Don’t let electrical gremlins sideline you—order now and get back on the road reliably.