2012 Sonic ECM Engine Control Module 12636386

Restore Your Sonic’s Engine Performance

Get a reliable, plug-and-play fix for your vehicle’s running issues. This ECM comes fully programmed to your VIN with the latest GM software updates. Simply install it and go! Provide your VIN at checkout to get back on the road fast.

$209.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01738-18 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance to Your Chevrolet

Is your 2012 Chevrolet Sonic, Cruze, or Trax suffering from erratic engine behavior, a persistent Check Engine Light, or a frustrating no-start condition? The Engine Control Module (ECM), the central computer of your vehicle’s powertrain, is often the culprit. This vital component manages everything from fuel injection and ignition timing to emissions controls and transmission shifting. When it fails, it can cause a cascade of problems that are often misdiagnosed. This replacement ECM, part number 12636386, is the definitive solution to restore your vehicle’s reliability and performance.

From the Diagnostic Bay
We had a 2012 Chevy Cruze with the 1.8L engine come in with a persistent P0171 (System Too Lean) code. The owner had already replaced the MAF sensor, both oxygen sensors, and even the fuel injectors based on advice from forums. The car still ran rough and idled poorly. After hooking up our professional scan tool, we noticed the short-term fuel trim data was completely unresponsive. This pointed away from the sensors and towards the computer itself. We tested the driver circuits within the original ECM and found a fault. After installing one of our pre-programmed modules, the fuel trims immediately returned to normal, and the engine ran perfectly. It’s a classic case where chasing codes costs more than diagnosing the root problem—a failing ECM.

Your Plug-and-Play Solution: The 2012 Sonic ECM

Replacing an ECM has traditionally been a complicated and expensive process, requiring a trip to the dealership for costly programming. We eliminate that hassle. This module is not just a part; it’s a complete solution. When you purchase from us, we flash the unit with the latest, most stable software updates directly from GM. We then program it specifically to your vehicle’s unique Vehicle Identification Number (VIN). This ensures that when you receive the part, it is 100% ready for installation. There is no need for additional programming or key relearning procedures. It is a true plug-and-play fix that gets you back on the road quickly and affordably.

Common Symptoms of a Failing ECM

  • ✔ Check Engine Light: The light may be on with various trouble codes, especially communication codes (U-codes) or codes for multiple unrelated sensors.
  • ✔ Engine Stalling or Misfiring: The engine may stall intermittently, run rough, or misfire as the ECM fails to properly control spark and fuel.
  • ✔ Poor Fuel Economy: An inability to correctly calculate the air-fuel mixture can lead to a sudden and significant drop in MPG.
  • ✔ No-Start Condition: The vehicle may crank but refuse to start if the ECM is not activating the fuel pump or ignition coils.
  • ✔ Transmission Shifting Issues: On automatic models, the ECM communicates with the transmission controller, and a fault can cause harsh or erratic shifting.
  • ✔ Loss of Spark or Injector Pulse: A common failure mode where the ECM’s internal drivers for the ignition coils or fuel injectors burn out.

Guaranteed Compatibility

This Engine Control Module is a direct replacement for a wide range of GM vehicles. Please verify your part number or contact us with your VIN to confirm fitment. This unit is compatible with the following part numbers: 12679199, 12642927, 12636386, 12621466, 12630789.

It is designed to fit the following makes and models:

  • 2011-2012 Chevrolet Cruze (1.8L)
  • 2009-2011 Chevrolet Aveo
  • 2013 Chevrolet Spark
  • 2009-2010 Pontiac Wave
  • 2013-2014 Chevrolet Trax (1.8L)
  • 2012 Chevrolet Sonic (1.8L)
  • 2009-2010 Pontiac G3

Don’t let a faulty computer keep your car off the road. Order this pre-programmed 2012 Sonic ECM and experience the difference a fully functional engine management system makes.

Frequently Asked Questions

Do I need to get this ECM programmed by a dealer?

No. This ECM comes fully programmed to your vehicle’s specific VIN before it ships. It is a plug-and-play installation, saving you a trip to the dealership and expensive programming fees.

What information do you need from me?

After you place your order, you must provide us with your vehicle’s 17-digit VIN. This allows us to load the correct software and vehicle-specific parameters onto the module for a seamless installation.

How can I be sure my ECM is the problem?

Common signs include a check engine light with communication codes, stalling, no-start conditions, or multiple unrelated sensor codes appearing at once. While these symptoms strongly point to the ECM, professional diagnosis is always recommended to rule out wiring or sensor issues.

Where is the ECM located on a 2012 Chevy Sonic?

On the 2012 Sonic with the 1.8L engine, the ECM is typically located on the driver’s side of the engine bay, mounted near the battery or firewall. It’s a silver metal box with several large electrical connectors.

Will this fix my car’s performance issues?

If the root cause of your vehicle’s problems is a failing ECM, this part is the correct solution. It will resolve issues like poor fuel economy, rough idle, and stalling that are directly caused by a faulty computer.

Is this part compatible with part number 12642927?

Yes, this module is a direct, compatible replacement for several part numbers, including 12642927, 12679199, 12621466, and 12630789. We program it to function perfectly for your specific vehicle.

Conditions & Options

Programmed to your VIN GM: 12621466

Year
Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

SONIC

Make

Year

2011, 2012

Brand

GM

Manufacturer Part Number

MPN

12636386

Scroll to Top