Restore Full Electronic Functionality to Your Vehicle
Are you grappling with perplexing electrical issues in your Chevrolet Orlando or another compatible GM vehicle? Flickering lights, malfunctioning power windows, a security system that acts on its own, or even a car that refuses to start can all point to a single culprit: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can create a cascade of frustrating and seemingly unrelated problems. This listing offers a straightforward, reliable solution: a replacement BCM, part number 13501739 (and its compatible interchanges), that arrives at your door fully programmed and ready for installation.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
- ✔ The security system or keyless entry system malfunctioning or setting off false alarms.
- ✔ Dashboard warning lights appearing without a clear cause, such as the airbag or ABS light.
- ✔ The vehicle failing to start, even with a good battery and starter.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Wipers operating incorrectly or activating on their own.
Why Choose Our 2012 Orlando Body Control Module Service?
Dealerships will often quote you a high price for a new BCM, followed by several hours of labor for installation and programming with their proprietary tools. Our service bypasses this expensive and time-consuming process entirely. We utilize a data cloning method that makes this a true plug-and-play solution. By transferring the exact configuration data—including the VIN, mileage, and key information—from your original BCM to this replacement unit, we ensure seamless integration with your vehicle’s existing electronic systems. There is no need for additional programming or calibration upon installation. It’s the most efficient and cost-effective way to get your car back on the road and working correctly.
How Our Simple Mail-In Service Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We Contact You: We will reach out with clear, step-by-step instructions for removing and shipping your original BCM to our facility.
- ✔ We Program Your Part: Once we receive your original module, our technicians will expertly transfer all critical data to the replacement unit within 1-2 business days.
- ✔ Receive Your Ready-to-Install BCM: We ship the programmed replacement BCM back to you. Simply install it, and you’re done!
Post-Installation Checks
While our goal is a 100% plug-and-play experience, some vehicle systems may require a simple relearn procedure after the BCM is reconnected. Please be aware of the following possibilities:
- Airbag System Sync: If your airbag warning light is illuminated after installation, a professional scan tool will be needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system. This is only required if the light is on.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to satisfy the traction control system.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Fitment and Part Number Compatibility
This BCM is a direct replacement for a wide range of GM vehicles. Please verify that your original module’s part number is on this list:
Compatible Part Numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, 13583451
This part will fit these makes and models with these options:
CAMARO 11 (RH dash), Conv
CRUZE 12 (LH kick panel)
EQUINOX 11 (LH side dash), body control
LACROSSE 11-12 (LH kick panel)
ORLANDO 12 (below center console)
REGAL 11 (LH dash), w/opt AUA (mid-year change)
SRX 11-12 (LH dash)
TERRAIN 11 (LH side dash), body control
VOLT 11-13 (RH engine compartment)
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer in your car that manages and controls many of the electronic accessories not related to the engine, such as power windows, locks, lights, wipers, and the security system.
How does this programming service work?
After you place your order, you will ship your original BCM to us. We then extract the unique data from your module and flash it onto the replacement unit. This ‘cloning’ process ensures the replacement is a perfect electronic match for your vehicle.
Is this really a plug-and-play solution?
Yes. Because we clone the data from your original part, the replacement module will work immediately upon installation without any need for expensive programming at a dealership. In rare cases, a minor relearn procedure might be needed for specific subsystems like the airbag or brake sensor.
What happens if I don’t send in my original BCM?
This service cannot be completed without your original module. The data contained within it is essential for programming the replacement part to work with your specific vehicle’s VIN and options.
How long does the entire process take?
Once we receive your module, our programming service typically takes 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with a tracking number as soon as your programmed part is on its way back to you.