Is Your 2012 Orlando Experiencing Strange Electrical Problems?
If you’re dealing with flickering lights, unresponsive power windows, a haywire security system, or other bizarre electrical issues in your 2012 Chevrolet Orlando, the culprit is likely a failing Body Control Module (BCM). The BCM acts as the central nervous system for your vehicle’s body electronics, managing everything from your interior lights and power locks to the anti-theft system. When it starts to fail, it can cause a cascade of frustrating and seemingly unrelated problems.
Don’t let a faulty module keep your vehicle off the road. This listing is for a replacement BCM programmed specifically for your vehicle. We eliminate the need for expensive dealership visits and complex programming tools by transferring the essential data from your original BCM directly onto this replacement unit. This makes the installation process as simple as plug-and-play.
The Simple, Cost-Effective Solution
Our professional programming service is designed to get you back on the road quickly and affordably. Here’s how it works:
- Place Your Order: Complete your purchase through our secure checkout.
- Ship Us Your Original BCM: We will contact you with clear, simple instructions on how to remove and ship your original BCM to our facility.
- We Program The Replacement: Our expert technicians will meticulously transfer the unique programming, key data, and vehicle-specific settings from your module to the replacement unit.
- Receive Your Plug-and-Play Module: We ship the programmed replacement BCM back to you. Once it arrives, simply install it, and your vehicle’s functions will be restored. No additional programming is required.
Symptoms of a Failing 2012 Orlando BCM
A failing Body Control Module can manifest in numerous ways. If you’re noticing any of the following, it’s a strong indicator that your BCM needs attention:
- ✔ Erratic behavior of interior or exterior lights (staying on, not turning on, or flickering).
- ✔ Power windows, door locks, or mirrors working intermittently or not at all.
- ✔ The vehicle’s security system engaging randomly, preventing the car from starting.
- ✔ Horn honking unexpectedly or the panic alarm going off.
- ✔ Wipers or radio turning on and off by themselves.
- ✔ Inaccurate or false warning lights on the instrument cluster.
- ✔ Communication errors with diagnostic scan tools.
This module is a direct replacement for the following part numbers:
13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, 13583451
Guaranteed Fitment for the Following Vehicles:
This BCM fits a wide range of GM vehicles. Please verify your part number is on the list above.
- 2012 LACROSSE – Body Control (BCM); (LH kick panel)
- 2011 LACROSSE – Body Control (BCM); (LH kick panel)
- 2013 VOLT – Body Control (BCM); (RH engine compartment)
- 2011 VOLT – Body Control (BCM); (RH engine compartment)
- 2012 SRX – Body Control (BCM); (LH dash)
- 2011 SRX – Body Control (BCM); (LH dash)
- 2011 TERRAIN – Body Control (BCM); (LH side dash)
- 2011 EQUINOX – Body Control (BCM); (LH side dash)
- 2011 CAMARO – Body Control (BCM); (RH dash), Conv
- 2012 CRUZE – Body Control (BCM); (LH kick panel)
- 2012 ORLANDO – Body Control (BCM); (below center console)
- 2011 REGAL – Body Control (BCM); (LH dash), w/opt AUA (mid-year change)
Post-Installation Procedures
While our programming makes this a plug-and-play part, some vehicle systems may require a recalibration procedure after the BCM is reconnected. These are simple procedures that can be performed with a compatible high-level scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the airbag system with the new BCM. This is only required if the light is on.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be needed to ensure correct operation of the brake lights and stability control systems.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Frequently Asked Questions
What exactly does the Body Control Module do?
The BCM is a computer that supervises and controls many of your car’s non-engine-related functions. This includes power windows, locks, lights, wipers, security system, and more. It’s the brain behind your vehicle’s comfort and convenience features.
Why do I have to send in my original module?
Your original BCM contains vital security and vehicle-specific configuration data, including the VIN and key information. By transferring this data to the replacement unit, we make it a plug-and-play part, allowing you to avoid a costly and time-consuming trip to the dealership for programming.
Is this part difficult to install?
For the 2012 Orlando, the BCM is located below the center console. Installation is typically straightforward, involving disconnecting the battery, removing some trim panels, and swapping the modules. It is a task a confident DIYer can perform, but we always recommend professional installation if you are unsure.
What if the airbag light is on after I install it?
This is a normal possibility. The airbag system (SDM) and BCM are linked for security. If the light is on, a simple ‘Setup SDM Primary Key in BCM’ procedure needs to be performed with a professional scan tool to re-establish this link and turn off the light.
Is there a core charge for this part?
No, there is no core charge. We require your original module for the data transfer service, but you do not need to return the replacement unit to us after installation.