Is Your 2012 Chevy Cruze Plagued by Electrical Gremlins?
Are you dealing with flickering lights, malfunctioning power windows, a dead instrument cluster, or a car that won’t start for no apparent reason? These frustrating and unpredictable issues often point to a single culprit: a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s electronic accessories, and when it starts to fail, it can create a cascade of problems that are difficult to diagnose. Don’t let a faulty module keep you off the road or lead to an expensive and time-consuming visit to the dealership.
Expert Pro Tip: Before condemning your BCM, always perform a full battery and charging system test. A weak battery or a failing alternator can cause low voltage conditions that mimic BCM failure. Also, check the main BCM connectors and ground points for any signs of corrosion or looseness, as a poor connection can cause intermittent electrical faults.
The Simple, Plug-and-Play Solution
Forget about towing your car to a dealership, paying for expensive diagnostic fees, and waiting for a new module to be ordered and programmed. We offer a streamlined solution that gets you back on the road quickly and affordably. This listing is for a replacement BCM, part number 13583450, that is professionally programmed using the data from your original module. This cloning process ensures that the replacement BCM is a perfect match for your vehicle’s specific configuration, retaining all original keys and security information. The result is a true plug-and-play module that requires no additional programming upon installation.
Common Symptoms of a Failing 2012 Cruze BCM
- ✔ Intermittent or non-functional power windows, locks, and mirrors.
- ✔ Erratic behavior from the interior or exterior lights (flickering, staying on, or not turning on).
- ✔ Instrument cluster gauges behaving erratically or going completely dead.
- ✔ The radio or infotainment system turning on and off randomly.
- ✔ Key fob not working or security system acting up.
- ✔ Unexplained battery drain when the vehicle is off.
- ✔ No-start condition where the engine cranks but won’t fire, or won’t crank at all.
- ✔ False warning lights appearing on the dashboard.
How Our Programming Service Works
Our process is designed for your convenience:
- Place Your Order: Purchase this BCM service. Ensure your contact information is up-to-date.
- We Contact You: We will reach out with clear, simple instructions on how to remove and ship your original BCM to our facility.
- Send Us Your Module: Carefully package your original BCM and ship it to us.
- We Clone the Data: Upon receipt, our technicians will extract the critical data from your original module and transfer it to the replacement unit.
- We Ship It Back: We ship the fully programmed, plug-and-play replacement BCM back to you, typically within 1-2 business days. You will receive tracking information as soon as it ships.
Installation and Post-Install Notes
Installation is straightforward: simply disconnect the battery, remove the old BCM (typically located in the driver’s side kick panel), and install the new one. Once installed and the battery is reconnected, your vehicle should start and function correctly. However, in some GM vehicles, a couple of simple relearn procedures may be necessary:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is required. This syncs the new BCM with the airbag system and can be performed with a professional-grade scan tool.
- Brake Pedal Position Relearn: To ensure proper brake light and traction control function, a brake pedal position sensor recalibration might be needed. This is also done with a diagnostic tool.
Always consult a factory service manual or a qualified technician if you are unsure about any part of the installation or post-installation process.
Guaranteed Compatibility
This BCM is a direct replacement for a wide range of GM vehicles. It is compatible with part numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, and 13583451. It fits models such as the Chevrolet Cruze, Volt, Camaro, Equinox, Orlando, Buick LaCrosse, Regal, Cadillac SRX, and GMC Terrain from various years. Please verify your part number to ensure compatibility.
Frequently Asked Questions
What is a BCM cloning service?
BCM cloning is a process where we transfer the essential vehicle-specific data—like the VIN, key information, and security settings—from your original Body Control Module to a replacement unit. This makes the replacement module a perfect electronic match for your car, allowing it to be installed without needing any further programming from a dealer.
Do I need to send my original BCM?
Yes, this service requires you to ship your original BCM to us. We need your module to extract the unique data required to program the replacement. We will provide detailed shipping instructions after you place your order.
Will I need to program my keys again?
No. Because we clone all the data from your original module, the replacement BCM will recognize your existing keys. There is no need for key reprogramming, saving you time and money.
Is this a difficult part to install?
For most DIY mechanics, the installation is relatively simple. The BCM in a 2012 Cruze is typically located behind the driver’s side kick panel. It involves disconnecting the battery, removing a few trim pieces, and swapping the modules. However, if you are not comfortable with automotive electronics, we recommend professional installation.
What is the turnaround time?
Once we receive your original module, our programming service is typically completed within 1-2 business days. We then ship the programmed replacement BCM back to you.