Restore Full Electrical Function to Your Vehicle
Are you battling a storm of bizarre electrical problems in your 2012 Chevy Cruze or another compatible GM vehicle? From flickering lights and malfunctioning power windows to a car that refuses to start, a failing Body Control Module (BCM) is often the culprit. The BCM acts as the central command center for your car’s body electronics, and when it fails, it can create frustrating and unpredictable issues. This listing offers a reliable, straightforward solution: a replacement BCM, part number 13501737, that comes fully programmed with your vehicle’s original data.
From the Diagnostic Bay
We recently had a 2012 Chevy Equinox in the shop that was driving its owner crazy. The horn would honk randomly when turning, the interior lights would stay on, and the remote key fob worked only intermittently. The owner had already replaced the battery and checked all the fuses. After connecting our diagnostic tool, we saw multiple communication errors pointing towards a single source. We identified a faulty BCM. By providing a replacement module with the original’s data cloned onto it, we solved every single electrical gremlin in one go. It’s a common failure, but with this service, it’s an easy fix.
Common Symptoms of a Failing BCM
If you’re experiencing any of the following issues, a faulty BCM is the likely cause. This service for your 2012 Cruze BCM is designed to correct these problems:
- ✔ Power windows, locks, or mirrors operating erratically or not at all.
- ✔ Interior dome lights or exterior lights (headlights, taillights) staying on or not turning on.
- ✔ The security system acting up, causing alarm issues or a no-start condition (anti-theft light flashing).
- ✔ Windshield wipers turning on by themselves or not working when commanded.
- ✔ Dashboard warning lights appearing for no reason.
- ✔ The horn honking unexpectedly or failing to work.
- ✔ Key fobs not being recognized by the vehicle.
How Our Simple Programming Service Works
Forget expensive dealership visits and complex programming procedures. Our service makes this repair as simple as possible. After you purchase, we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our expert technicians will extract the unique data—including your vehicle’s VIN, key information, and specific options—and flash it onto this replacement module. We then ship the fully programmed, plug-and-play BCM back to you. Installation is as simple as swapping the modules.
Installation and Post-Install Notes
After installing your newly programmed 2012 Cruze BCM, your vehicle should be back to normal. However, in some GM vehicles, a couple of simple relearn procedures may be necessary:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a technician will need to perform the “Setup SDM Primary Key in BCM” procedure with a professional scan tool. This syncs the new BCM with the airbag system. This is only required if the light is on.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure proper brake light and traction control functionality. This is a quick procedure that can be done with a compatible diagnostic tool.
Wide Compatibility Across GM Models
This BCM is a direct replacement for a wide range of part numbers, ensuring broad compatibility. It fits numerous vehicles beyond the Chevy Cruze. Please verify your part number against this list:
Compatible Part Numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, 13583451.
Fits Models Including: Buick LaCrosse (2011-12), Chevy Volt (2011-13), Cadillac SRX (2011-12), GMC Terrain (2011), Chevy Equinox (2011), Chevy Camaro (2011), Chevy Orlando (2012), and Buick Regal (2011).
Frequently Asked Questions
What is a BCM cloning service?
It’s a process where we transfer the essential vehicle-specific data (like VIN, mileage, and key programming) from your original, failing BCM to a fully functional replacement unit. This makes the new module plug-and-play, avoiding the need for dealer programming.
Why do I need to send my original BCM?
Your original BCM holds the unique digital fingerprint for your car. By sending it to us, you ensure we can create a perfect data match on the replacement module, which is critical for the anti-theft system, key fobs, and other vehicle options to work correctly upon installation.
Will this fix my car’s specific electrical problems?
If your vehicle’s issues match the common symptoms of BCM failure listed above and a qualified mechanic has diagnosed the BCM as the fault, then this service is the correct solution. It resolves problems originating from the module itself.
Is any programming needed after I receive the module?
No, the module arrives ready for installation. It is a plug-and-play part. In rare cases, as noted above, a simple relearn procedure for the airbag or brake pedal sensor may be required, which can be done with a standard professional scan tool.
How long does the entire process take?
Once we receive your original module, our service is typically completed within 1-2 business days. We then ship the programmed replacement back to you. Total turnaround time will depend on shipping speeds.
What if my original BCM is completely dead or water damaged?
In many cases, we can still recover the data even from non-communicating or damaged modules. Please contact us before ordering if your BCM has severe physical or water damage so we can assess the likelihood of a successful data transfer.