2012 Captiva Sport Body Control Module 15093910 Programmed to Your VIN

End Your SUV’s Electrical Headaches.

Tired of flickering lights, faulty power windows, or random warning indicators on your 2012 Captiva Sport? This Body Control Module (BCM) is your direct-fit, reliable fix. It arrives programmed to your vehicle’s VIN, eliminating the need for an expensive dealership visit. Restore full functionality and peace of mind with this ready-to-install solution. Get back on the road without the electrical gremlins by ordering today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-350 Categories: ,
Guaranteed Safe Checkout

Restore Your Captiva’s Electrical System with a Plug-and-Play Solution

Are you dealing with baffling electrical issues in your 2012 Captiva Sport? Flickering lights, power windows with a mind of their own, a security system that won’t cooperate, or even a vehicle that refuses to start can all point to one central culprit: a failing Body Control Module (BCM). As the electronic nerve center of your vehicle, the BCM manages a huge range of comfort and security features. When it starts to fail, it can cause a cascade of frustrating and unpredictable problems.

This isn’t just another part; it’s a direct-fit, reliable solution. We take the guesswork and high dealership costs out of the equation. By providing your vehicle’s VIN at checkout, you receive a BCM that is professionally programmed with the latest GM software specifically for your Captiva Sport. This means it arrives ready for installation, bypassing the need for expensive programming tools or a trip to the dealer.

Case Study: A Tricky Diagnosis

A customer brought in a 2012 Captiva Sport with a complaint that was driving them crazy: the interior lights would pulse randomly, and the radio would occasionally shut off and on. They had already replaced the battery and checked the alternator. After hooking up my scanner, I saw multiple U-codes, specifically a U0140 (Lost Communication With Body Control Module). This is a classic sign. Instead of chasing shorts, we swapped in a VIN-programmed BCM. The communication faults cleared immediately, and all the strange electrical behavior was gone. It’s a reminder that sometimes the most complex-seeming problems have a straightforward, central solution.

Is Your Captiva Sport Showing These Symptoms?

A failing BCM can manifest in numerous ways. In my 20+ years in the shop, these are the most common indicators I’ve seen. If you’re experiencing any of these, a faulty BCM is the likely cause:

  • ✔ Erratic or non-functional power windows, locks, and mirrors.
  • ✔ Interior or exterior lights flickering, staying on, or not working at all.
  • ✔ The security system acting up, or the key fob not responding correctly.
  • ✔ Intermittent no-start conditions where the engine cranks but won’t fire.
  • ✔ Warning lights on the dash, such as the airbag or service vehicle light.
  • ✔ Diagnostic trouble codes (DTCs) related to communication errors, like U0140, U0155, or U0100.

A Straightforward Guide to Installation

Installing your pre-programmed 2012 Captiva Sport Body Control Module is a manageable job for a confident DIYer. For the 2012 Captiva Sport, the BCM is typically located in the center dash area. Always consult a service manual for precise location and torque specs.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and wait a few minutes for the system to fully discharge.
  2. Access the Module: Carefully remove the necessary dash trim panels to gain access to the BCM. It’s often secured to a bracket behind the glove box or center console stack.
  3. Disconnect and Remove: Unplug the electrical connectors from the old BCM. They have locking tabs, so be gentle. Then, unbolt the module from its mounting bracket.
  4. Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely fasten it. Reconnect all electrical connectors, ensuring they click into place.
  5. Post-Installation Checks: Reconnect the battery terminal. Start the vehicle and test all body functions: lights, windows, locks, and wipers. Note that some vehicles may require the additional procedures listed below.

Important Post-Installation Information

While our programming handles the heavy lifting, some GM vehicles require a final handshake between modules after installation. Depending on your specific vehicle, you may need a professional scan tool to perform these simple relearn procedures:

  • Airbag System Sync: If the airbag light is on, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the systems.
  • Brake Pedal Position Relearn: A recalibration may be necessary for proper brake light and traction control operation.

Verified Vehicle Compatibility

This Body Control Module is a direct replacement for part number 15093910 and is compatible with a wide range of GM vehicles. Please verify your original part number or consult the list below. This module fits the following models with specified options:

ACADIA 07-12, AVALANCHE 1500 10, CAPRICE 11-13, CAPTIVA SPORT 12, CTS 08-13, DTS 06-11, ENCLAVE 08-12, EQUINOX 07-09, ESCALADE 10, ESCALADE ESV 10, ESCALADE EXT 10, EXPRESS VANS 08-12, G8 08-09, HUMMER H2 08-09, IMPALA 06-13, LUCERNE 06-11, MONTE CARLO 06-07, OUTLOOK 07-10, SAVANA VANS 08-12, SRX 07-09, STS 10, SUBURBAN 1500 10, TAHOE 10, TORRENT 07-09, TRAVERSE 09-12, VUE 08-10, YUKON 10, YUKON XL 1500 10.
Note: Specific IDs or options may apply. Always match your part number for guaranteed fitment. The part number 15093910 is one of many compatible numbers for this module.

Frequently Asked Questions

Do I need to send my old BCM back?

No, there is no core charge for this module. You can keep your original part.

What information do you need to program the module?

After you place your order, you will need to provide us with your vehicle’s 17-digit VIN. We use this to load the correct GM software and settings for your specific vehicle configuration.

Is this a difficult part to install myself?

For someone with basic mechanical skills and tools, it is a very manageable repair. The most important part is getting access to the module, which is usually behind dash panels. Our pre-programming service eliminates the most difficult step, which is the software flashing.

What if my airbag light comes on after installation?

This is a normal possibility on some GM models. It simply means the new BCM needs to be electronically introduced to the airbag module (SDM). A technician with a bi-directional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure in a few minutes to resolve this.

Will this fix my specific problem?

This 2012 Captiva Sport Body Control Module is the definitive fix for issues originating from a faulty BCM. If you’re experiencing multiple, unrelated electrical problems, it’s the most likely cause. However, always perform proper diagnostics to rule out wiring or sensor issues first.

Genuine OEM

Yes

Year
Condition

Refurbished

MPN

Interchange part number

PartNumber

Model

Brand

Manufacturer Part Number

Scroll to Top