Is Your GM Vehicle Acting Possessed?
Are you dealing with a cascade of bizarre electrical problems? Maybe your power windows have a mind of their own, the interior lights are flickering, or the security system prevents your car from starting. These aren’t random glitches; they are classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, managing everything from your door locks and turn signals to the instrument cluster and anti-theft system. When it fails, it can make your vehicle unreliable and frustrating to drive.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, locks, or mirrors.
- ✔ Erratic behavior from the dashboard gauges or warning lights.
- ✔ The security or anti-theft light stays on, causing a no-start condition.
- ✔ Headlights, taillights, or interior lights not working correctly.
- ✔ Key fob not responding or remote start failing.
- ✔ Unexplained battery drain that leaves you stranded.
The Simple Solution: A Programmed Replacement Module
Traditionally, replacing a BCM meant a costly trip to the dealership for the part, installation, and hours of expensive programming. We’ve eliminated that hassle. This listing is for a replacement GM BCM 13580696 that arrives at your door fully programmed and ready for installation. Our professional cloning service makes this possible. The process is straightforward:
- Place Your Order: Complete your purchase, ensuring your contact information is accurate.
- Ship Us Your Original BCM: We will contact you with simple instructions for shipping your original module to our facility.
- We Transfer the Data: Our technicians will extract the critical vehicle-specific data from your original BCM and flash it directly onto the replacement unit. This ensures seamless communication with your vehicle’s other modules and retains all original key programming.
- Receive Your Ready-to-Install BCM: We ship the newly programmed module back to you. Installation is as simple as swapping the old part for the new one. No dealer visit, no additional programming fees.
From the Diagnostic Bay
We had a 2012 Chevy Equinox come in that was a textbook BCM failure. The customer complained that sometimes the car wouldn’t start, the radio would randomly turn off, and the power locks worked only when they felt like it. They had already replaced the battery twice. After confirming power and grounds to the BCM were good, we identified the module itself as the culprit. Instead of a complex dealer replacement, we used our cloning service. We transferred the data from his faulty unit to a replacement module. The customer installed it himself in under an hour, and every single electrical gremlin was gone. It’s a powerful fix that saves drivers time, money, and a massive headache.
Why Choose Our Programmed GM BCM 13580696?
This isn’t just a part; it’s a complete, cost-effective repair solution. By cloning your original data, we bypass the need for expensive factory scan tools and security relearn procedures that are typically required. This GM BCM 13580696 is the smart way to restore your vehicle’s functionality and get back on the road with confidence. This service is compatible with part numbers 13580696, 123589093, 13588446, 13584692, and 13583542.
Important Post-Installation Notes
While our goal is a plug-and-play experience, certain vehicle systems may require a simple sync procedure after installation. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional-grade scan tool. This syncs the BCM with the airbag module.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and traction control function.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Frequently Asked Questions
How does the cloning process work?
You ship your original BCM to us. Our technicians use specialized equipment to read the unique programming and security data from your module and write it onto the replacement unit. This makes the replacement an exact electronic match for your vehicle.
Do I need to send my keys?
No, you do not need to send your keys. Because we clone all the data from your original module, the replacement BCM will recognize your existing keys automatically.
Is this a plug-and-play part?
Yes, for over 95% of installations. The module arrives ready to be installed without any initial programming. In some rare cases, as noted above, a simple relearn procedure like an airbag sync may be required with a scan tool.
What if my original BCM is completely dead or not communicating?
In most cases, even if the BCM is failing, we can still extract the necessary data. If your module is severely damaged (e.g., by fire or water), please contact us before ordering to discuss options.
How long does the service take?
Our programming service is typically completed within 1-2 business days after we receive your original module. We then ship the programmed replacement back to you.