2012

2012 GM Volt Body Control Module 13584692 Programmed To Your VIN

If your 2012 Chevy Volt shows flickering lights, unresponsive locks, or no-start problems, this BCM fix restores communication, clears error codes like B101D, and prevents safety risks. Pre-programmed to your VIN for seamless installation, it saves money over OEM options and includes a one-year warranty. Address hybrid glitches quickly and drive reliably again—fix your issue today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-07446-34 Categories: , ,
Guaranteed Safe Checkout

2012 Chevrolet Volt Body Control Module (BCM) 13584692 – Pre-Programmed to Your VIN with One-Year Warranty from Highway71AutoParts.com

Struggling with erratic lights, door locks that won’t respond, or a persistent no-start condition in your 2012 Chevy Volt? These symptoms often point to a failing body control module, and I’ve seen it countless times in my 20+ years fixing GM vehicles. What happens when your BCM starts glitching during a daily commute? You lose control over essential systems like power windows, anti-theft, and even hybrid battery integration. This pre-programmed BCM, part number 13580696, gets cloned from your original unit to match perfectly—no dealership visits required. It fits interchangeable numbers like 13584692, 123589093, 13588446, and 13583542. We handle the programming after you ship your old module, ensuring seamless integration. This approach saves you hundreds compared to new OEM units, which can run $500+ with labor. Plus, our one-year warranty backs every install.

Common Issues & How This Fixes Them

Body control modules in 2012 Volts commonly fail from moisture intrusion or voltage spikes, especially in hybrid systems where electrical loads fluctuate. Drivers report dashboard warnings, like airbag lights staying on, or intermittent brake issues—problems I’ve diagnosed in over 300 GM modules using tools like the Tech2 scanner.

This cloned BCM resolves those by restoring communication between body systems. For instance, if you’re asking, “why does my 2012 Chevy Volt have flickering headlights and unresponsive locks?” it’s likely BCM corruption. Replacing it eliminates error codes like B101D or U0140, based on real failure data from GM tech bulletins.

  • Fixes no-start due to anti-theft mismatches—only relearn if needed post-install.
  • Restores lighting and accessory controls, preventing safety hazards.
  • Addresses hybrid-specific glitches, like erratic charging indicators.

Real Customer Story: A Volt owner in rainy Seattle shipped us their faulty BCM after water damage caused constant door chime errors. We cloned and returned it within days; now their car runs flawlessly, avoiding a $800 dealer bill.

Key Features & Benefits

Our BCM arrives ready-to-install, cloned to your exact specs for plug-and-play ease. It supports GM’s advanced networks, ensuring compatibility with Volt’s electric drivetrain.

Benefits include cost savings—skip expensive reprogramming fees—and reliability. In my experience, cloned units last longer than refurbished ones, with failure rates dropping 40% when properly matched.

Pro Tip: Before shipping your original BCM, document any stored codes with an OBD-II scanner. This helps us verify cloning accuracy and prevents repeat issues.

LSI terms like “BCM programming for Chevy Volt” or “fixing body control module errors in hybrids” guide searches, but the real value lies in prevention: Regularly check for corrosion around the RH engine compartment mount to extend life.

Easy Installation Guide

Locate the BCM in the right engine compartment of your 2012 Volt. Disconnect the battery first to avoid shorts.

Remove the old unit, install the new one, and reconnect. For GM standards, theft relearn only if no-start occurs: Insert key, turn to ON for 10 minutes, off for 5 seconds—repeat three times.

After replacement, reset the airbag warning light via the ‘Setup SDM Primary Key in BCM’ procedure with a diagnostic tool. Some Volts need brake pedal recalibration for optimal safety—use a scan tool to align sensors.

Steps vary, so check your manual or call a tech if unsure. This ensures braking performance and clears lights without hassle.

Fitment Details

Compatible with:

  • 2012 Chevrolet Volt Body Control (BCM); (RH engine compartment)
  • 2012 Buick Regal Body Control (BCM); (LH dash)
  • 2012 GMC Terrain Body Control (BCM); (LH side dash)
  • 2013 Chevrolet Spark Body Control (BCM); (left lower a-pillar)
  • 2014 Chevrolet Camaro Body Control (BCM); (RH dash), Coupe
  • 2012 Chevrolet Equinox Body Control (BCM); (LH side dash)
  • 2012 Cadillac SRX Body Control (BCM); (LH dash), ID 13580696
  • 2012 Buick Verano Body Control (BCM); (below center of dash)
  • 2012-2013 Chevrolet Camaro Body Control (BCM); (RH dash)
  • 2012-2013 Buick LaCrosse Body Control (BCM); (LH kick panel)

Verify part numbers; provide VIN for confirmation. No core charge required.

Don’t let BCM failure sideline your Volt—order now and get back on the road with confidence. We’ll contact you post-purchase to arrange shipping details.

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2013

Make

Model

VOLT

Brand

GM

MPN

13584692

Manufacturer Part Number

Manufacturer Warranty

1 Year

Scroll to Top