Is Your Vehicle Plagued by Bizarre Electrical Problems?
The Body Control Module (BCM) is the central command center for your vehicle’s electronics. It manages everything from your power windows and door locks to the interior lights, security system, and even communication between other critical modules. When the BCM begins to fail, it can create a cascade of confusing and frustrating issues that can be difficult to diagnose. You might find your car behaving erratically, with problems that come and go without warning. This isn’t just an inconvenience; a faulty BCM can affect vehicle security and drivability.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights flickering, staying on, or not working at all.
- ✔ The security system acting up, causing alarm issues or preventing the car from starting.
- ✔ Inaccurate gauge readings on the instrument cluster.
- ✔ Warning lights (like Airbag or ABS) appearing on the dash for no apparent reason.
- ✔ Remote keyless entry failure.
- ✔ A complete no-start condition where the engine won’t even crank.
The Perfect Solution: A Plug-and-Play Cloned BCM
Replacing a BCM isn’t as simple as swapping the part. A new or used module from a dealership or salvage yard requires expensive and complex programming to sync it with your vehicle’s unique Vehicle Identification Number (VIN) and specific options. Our professional cloning service eliminates this hassle entirely. We take the vital data from your original, failing BCM and transfer it directly to this replacement unit. The result is a module that is 100% plug-and-play. Simply install it, and your car will recognize it as the original, restoring full functionality without any need for a trip to the dealer.
Technical Specifications and Fitment for the 2011 Regal Body Control Module
This BCM is a direct replacement for a wide range of General Motors vehicles. Our service ensures that the module you receive is precisely configured for your car’s systems. This unit is compatible with the following part numbers:
13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, 13583451
This part is confirmed to fit many models, including but not limited to the Buick LaCrosse, Chevy Volt, Cadillac SRX, GMC Terrain, Chevy Equinox, Camaro, Cruze, and Orlando from specific model years. Please verify your part number to ensure compatibility.
Installation and Post-Install Procedures
Installation is straightforward: disconnect the battery, locate and remove your old BCM, and install the new one. However, in some vehicles, additional synchronization steps may be required for specific systems.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This is only necessary if the light appears and is a simple step for any qualified technician.
- Brake Pedal Position Relearn: On certain models, a brake pedal position sensor recalibration might be needed to ensure correct operation of the brake lights and stability control systems.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a certified automotive technician for specific instructions related to your vehicle.
Frequently Asked Questions
How does the cloning service work?
After you place your order, we will provide you with instructions to ship your original BCM to us. Our technicians will then extract the unique programming and security data and flash it onto the replacement module. We then ship the plug-and-play replacement back to you.
Why is this better than buying a used BCM from a junkyard?
A used BCM from another vehicle contains the wrong VIN and security information. It will not work in your car without being reprogrammed by a dealer, which is costly and often not possible. Our service makes the replacement module an exact electronic match to your original.
How long does the entire process take?
The programming service is typically completed within 1-2 business days of us receiving your original module. The total time will depend on shipping transit times to and from our facility.
What if my original BCM is not communicating at all?
In most cases, even if the BCM is failing, we can still extract the necessary data. If your module is severely damaged (e.g., by fire or water), please contact us before ordering to discuss options.
Is any special programming required after I install it?
No, the module is pre-programmed to be plug-and-play. However, as mentioned in the description, some vehicles may require a simple relearn procedure for the airbag or brake pedal position sensor, which can be done with a standard professional scan tool.