Restore Your Vehicle’s Performance and Reliability
Is your 2011 Dodge Avenger or Chrysler 200 suffering from frustrating and unpredictable engine problems? A persistent Check Engine Light, sudden stalling, rough idling, or a complete no-start condition can often be traced back to a failing Engine Control Module (ECM). This central computer is the brain of your vehicle’s engine, managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it begins to fail, it can cause a cascade of issues that are not only annoying but can also be unsafe. This direct-fit replacement ECM is the definitive solution to get your vehicle running smoothly and reliably once again.
From the Diagnostic Bay
We had a 2011 Avenger come into the shop with a classic complaint: intermittent stalling at stoplights and a check engine light with codes for a faulty camshaft position sensor. The owner had already replaced the sensor twice with no luck. After confirming the sensor and its wiring were good, we hooked up our scope to the ECM. We found the signal from the sensor was perfect going into the module, but the ECM wasn’t processing it correctly. A new, properly programmed 2011 Avenger ECM was the fix. The car ran perfectly, and the customer was relieved to finally have the right diagnosis after wasting time and money on the wrong parts.
Why Choose Our Plug-and-Play 2011 Avenger ECM?
Replacing an ECM has historically been a complicated and expensive process, often requiring a tow to the dealership for costly programming. We eliminate that hassle completely. This module arrives at your door fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This means there is no need for additional programming or dealer intervention. It’s a true Plug-and-Play solution designed for both professional technicians and savvy DIYers. Simply disconnect the battery, swap the modules, reconnect the battery, and you’re ready to go. You’ll restore factory performance and clear those stubborn diagnostic trouble codes for good.
Common Symptoms of a Failing Engine Computer
- ✔ Persistent and illuminated Check Engine Light (CEL)
- ✔ Engine stalling or shutting off unexpectedly while driving
- ✔ Difficulty starting the engine or a complete no-start condition
- ✔ Noticeable decrease in fuel economy
- ✔ Rough or erratic engine idling
- ✔ Hesitation or stumbling during acceleration
- ✔ Harsh or incorrect automatic transmission shifting
- ✔ Communication errors with diagnostic scan tools
Guaranteed Fitment and Compatibility
This Engine Control Module is a direct replacement for 2011 Dodge Avenger and 2011 Chrysler 200 models equipped with the 2.4L engine and a 6-speed automatic transmission. It is compatible with a wide range of original part numbers, ensuring a perfect match for your vehicle. Please verify your part number against the list below to confirm compatibility.
Replaces Part Numbers: 05150627AB, 68057006AA, 68057006AB, 68057006AC, 68057006AD, 68057006AE, 68057006AF, 68057006AG, 68057008AA, 68057008AB, 68057008AC, 68057008AD, 68057008AE, 68057008AF, 68057015AA, 68057015AB, 68057015AC, 68057015AD, 68057015AE, 68057015AF, 68057015AG, 68057015AH
Frequently Asked Questions
Is this ECM really “Plug and Play”?
Yes, absolutely. We program the module using the VIN you provide during checkout. This ensures that all the necessary software and security information for your specific vehicle is loaded onto the computer. When you receive it, no further programming is required. Just install it, and your car will start and run correctly.
Where is the ECM located on a 2011 Dodge Avenger or Chrysler 200?
On these models, the ECM is typically located in the engine bay, mounted to the driver’s side inner fender well or near the firewall. It will have several large electrical connectors attached to it. Always disconnect the vehicle’s battery before attempting to remove or install the module.
Will this fix my specific problem?
While this part resolves a wide range of the symptoms listed above, proper vehicle diagnosis is always recommended. If your vehicle exhibits these signs, a faulty ECM is a very common cause. This part is designed to correct issues originating from a failed engine computer.
What information do you need from me to program it?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your driver’s side dashboard (visible through the windshield) or on the driver’s side door jamb sticker. Please provide this information during the checkout process to ensure accurate programming.
Does this part fit the Chrysler 200 as well?
Yes, this ECM is also the correct fit for the 2011 Chrysler 200 equipped with the 2.4L engine and 6-speed automatic transmission. It serves as a direct replacement for both the Avenger and 200 models with these specifications.