Restore Your Camaro’s Electrical System with a Plug-and-Play BCM
Are you experiencing a host of frustrating and seemingly random electrical issues with your 2011 Chevrolet Camaro? From flickering lights and malfunctioning power windows to security system errors, the root cause is often a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it malfunctions, it can make your car feel unreliable and unpredictable. This listing offers a straightforward, effective solution: a replacement BCM, part number 13583450, that is professionally programmed with the data from your vehicle’s original module.
From the Diagnostic Bay
We recently had a 2011 Camaro convertible roll into the shop with a classic case of BCM failure. The owner reported that the key fob worked intermittently, the interior dome light would stay on, and the radio would sometimes turn on by itself after the car was shut off. He had already replaced the battery and checked all the fuses to no avail. A diagnostic scan revealed multiple communication error codes all pointing back to the BCM. Instead of a costly new module and a trip to the dealer for programming, we performed this exact cloning service. Once the programmed replacement BCM was installed, every single electrical gremlin vanished. This is the most reliable and cost-effective fix for these common issues.
Is Your 2011 Camaro Body Control Module Failing?
A faulty BCM can manifest in numerous ways. If you’re noticing any of the following symptoms, it’s a strong indicator that your BCM needs attention:
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The vehicle’s security system engaging randomly or preventing the car from starting.
- ✔ Dashboard warning lights (like the airbag or check engine light) illuminating for no apparent reason.
- ✔ Key fob not being recognized or functioning intermittently.
- ✔ Wipers, horn, or other accessories not working correctly.
The Simple, No-Hassle Programming Service
Forget about expensive dealership visits, towing fees, and complex programming procedures. Our service is designed to get you back on the road quickly and easily. Here’s how it works:
- Place Your Order: Complete your purchase. We will contact you with clear instructions and a shipping address.
- Ship Us Your Original BCM: Carefully remove your original BCM and send it to us.
- We Transfer the Data: Upon receipt, our technicians will extract the essential vehicle-specific data (including VIN, mileage, and key programming) from your module.
- Program the Replacement: We will then flash this data onto the replacement BCM (part #13583450).
- Receive Your Plug-and-Play Module: We ship the newly programmed module back to you. Installation is as simple as plugging it in. No further programming is required.
Post-Installation Procedures
While our BCM is designed to be a plug-and-play solution, some GM vehicles may require a simple relearn procedure after installation. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: In some cases, a brake pedal position sensor recalibration might be necessary to ensure proper brake light and traction control functionality.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Part Number Compatibility
This module is a direct replacement for the following part numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, 13583451. It is also compatible with a wide range of GM vehicles, including:
- 2011-2012 Buick LaCrosse
- 2011-2013 Chevrolet Volt
- 2011-2012 Cadillac SRX
- 2011 GMC Terrain
- 2011 Chevrolet Equinox
- 2011 Chevrolet Camaro
- 2012 Chevrolet Cruze
- 2012 Chevrolet Orlando
- 2011 Buick Regal
Frequently Asked Questions
What is this service exactly?
This is a programming service. You purchase this listing and ship your original BCM to us. We then transfer its unique programming to this replacement module and ship it back to you, ready for a simple, plug-and-play installation.
Why is this better than buying a used BCM from a junkyard?
A standard used BCM is programmed to another vehicle’s VIN and options, so it will not work in your car without being reprogrammed by a dealer. Our service makes this replacement module a perfect electronic match for your specific vehicle.
How long does the programming process take?
We typically complete the programming and ship the module back to you within 1-2 business days of receiving your original unit.
Do I need a dealer to program this after I install it?
No. The module arrives pre-programmed and ready to install. In rare cases, a simple relearn procedure for the airbag or brake systems may be needed, which can be done by most independent repair shops.
What if my original BCM is completely dead or missing?
This specific service requires your original module to read the data from. If your module is missing or non-communicative, please contact us before ordering to discuss other possible solutions.