Is Your 2011 Dodge Avenger or Chrysler 200 Running Poorly?
If you’re experiencing frustrating issues like a persistent check engine light, rough idling, stalling, or a sudden drop in fuel efficiency, the root cause might be a failing Engine Control Module (ECM). The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it starts to fail, it can create a cascade of problems that are difficult to diagnose and can leave your vehicle unreliable. Don’t let a faulty computer keep you off the road. This direct-fit, pre-programmed ECM is the definitive solution to restore your vehicle’s performance and reliability.
From the Diagnostic Bay
We had a 2011 Dodge Avenger come into the shop with a complaint of intermittent stalling at stoplights and a check engine light that a local parts store had scanned as a random misfire. The owner had already replaced the spark plugs, ignition coils, and even the camshaft position sensor with no success. After hooking up our professional scan tool, we noticed erratic data from the fuel trim and ignition timing parameters. The signals weren’t just off; they were inconsistent, jumping around without reason. This pointed us away from the mechanical parts and straight to the brain – the ECM. A failing processor inside the original module was sending corrupt commands. After installing one of our pre-programmed units, the car immediately idled smoothly, all data parameters stabilized, and the check engine light was gone for good. It’s a classic case where chasing symptoms costs more than fixing the core problem.
The Plug-and-Play Solution for Your Vehicle
Replacing an ECM has traditionally been a costly and inconvenient process, often requiring a tow to the dealership for expensive programming. We eliminate that hassle. This Engine Control Module arrives at your doorstep fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and mileage. This means the installation is a straightforward, plug-and-play process. Simply disconnect the old module, connect this one, and you’re ready to go. No specialized tools, no dealer appointments, and no additional programming fees are required. It’s the most efficient way to get your Avenger or 200 back to factory-spec operation.
Common Symptoms of a Failing 2011 Avenger ECM
- âś” Check Engine Light is illuminated, often with communication-related (U-codes) or processor fault (P06xx) trouble codes.
- âś” Engine stalling or shutting off unexpectedly while driving or idling.
- âś” Noticeable decrease in fuel economy (MPG).
- âś” Rough or erratic engine idle.
- âś” Hesitation or stumbling during acceleration.
- âś” Difficulty starting the engine or a complete no-start condition.
- âś” Automatic transmission shifting harshly or at the wrong times.
- âś” Cooling fans not turning on, leading to overheating.
Guaranteed Compatibility and Reliability
This module is a direct replacement for a wide range of original part numbers, ensuring a perfect fit and function for your 2011 Dodge Avenger or Chrysler 200 equipped with the 2.4L engine and 6-speed automatic transmission. We have meticulously tested this unit to meet or exceed original equipment standards for performance and longevity. By ordering this pre-programmed 2011 Avenger ECM, you are investing in a reliable, long-term repair that restores the precise control your engine needs to run efficiently and powerfully.
This ECM is a direct replacement for the following part numbers: 05150627AB, 68057006AA, 68057006AB, 68057006AC, 68057006AD, 68057006AE, 68057006AF, 68057006AG, 68057008AA, 68057008AB, 68057008AC, 68057008AD, 68057008AE, 68057008AF, 68057015AA, 68057015AB, 68057015AC, 68057015AD, 68057015AE, 68057015AF, 68057015AG, 68057015AH.
Frequently Asked Questions
Do I need to have this ECM programmed by a dealer?
No. This unit comes fully programmed to your vehicle’s VIN and mileage. It is a true plug-and-play solution, requiring no additional programming or dealer intervention. Simply install it, and your car is ready to drive.
Where do I provide my vehicle’s VIN?
You will be prompted to enter your vehicle’s VIN during the checkout process. This information is crucial for us to program the module correctly for your specific car. Please double-check the VIN for accuracy before submitting your order.
Is this compatible with a 2011 Chrysler 200?
Yes, this ECM is fully compatible with the 2011 Chrysler 200 as long as it is equipped with the 2.4L engine and a 6-speed automatic transmission. It shares the same electronic architecture as the 2011 Dodge Avenger.
What if my original part number is not on the list?
The part numbers listed cover the vast majority of vehicles for this application. If your part number is different, please contact our support team with your VIN before ordering. We can verify compatibility to ensure you receive the correct part.
What tools are needed for installation?
Installation typically requires basic hand tools, such as a socket set and a screwdriver. The most important step is to disconnect the vehicle’s battery before you begin to prevent any electrical damage. The ECM is usually located in the engine bay and is accessible for a straightforward swap.