Restore Full Functionality to Your 2011-2013 Chevrolet Caprice
Is your Caprice experiencing bizarre electrical problems? Intermittent power windows, flickering interior lights, a security system that acts up, or warning messages on the dash are classic signs of a failing Body Control Module (BCM). As the central nervous system for your vehicle’s electronics, a faulty BCM can cause a cascade of frustrating issues. This isn’t just an annoyance; it can affect vehicle security and safety. Instead of facing a costly trip to the dealership for a new module and expensive programming, we offer a simple, reliable, and cost-effective solution.
This is not just a replacement part; it’s a comprehensive Cloning Service. We transfer the exact data from your original BCM to this replacement unit. This process copies your vehicle’s specific configuration, security information, and key data. The result is a true plug-and-play module. There’s no need for a high-end scan tool or a visit to the dealer for programming. Simply install the module, and your Caprice is back to normal. This service is the definitive fix for a failing 2011-2013 Caprice BCM.
A Technician’s Notebook: The Case of the Caprice PPV Gremlin
A few months back, a local police department brought in a 2012 Caprice PPV that was driving them crazy. The dome lights would stay on randomly, the radio would shut off, and worst of all, the anti-theft system would occasionally prevent the car from starting—a critical issue for an emergency vehicle. They had already replaced the battery and checked grounds. Diagnostics showed several communication error codes, including a U0140 (Lost Communication With Body Control Module). After confirming power and ground to the BCM were solid, we knew the module itself was the culprit. Instead of a new, unprogrammed unit, they opted for our cloning service. We copied their original module’s data, sent them the plug-and-play replacement, and they had the vehicle back in service the same day it arrived. No programming, no fuss, just a solid fix.
Common Symptoms of a Failing BCM
If you’re experiencing any of the following, a faulty Body Control Module is the likely cause. In my 20+ years of experience, these are the most common indicators I’ve seen in the shop:
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The security system or keyless entry failing to work correctly.
- ✔ The horn sounding unexpectedly or not working when pressed.
- ✔ Dashboard warning lights (like the airbag or security light) illuminating for no reason.
- ✔ Communication-related Diagnostic Trouble Codes (DTCs), such as U0140, U0155, or B1001.
- ✔ A no-start condition where the engine cranks but won’t fire due to a security lockout.
Your Straightforward Installation Guide
Thanks to our cloning service, installing your replacement 2011-2013 Caprice BCM is a direct swap. While the exact location can vary slightly, the process is generally the same.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Locate the BCM: On the 2011-2013 Caprice, the Body Control Module is typically located in the passenger compartment, often behind a kick panel or under the dashboard.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New Module: Mount the replacement BCM in the same location and securely reconnect all the electrical connectors. You should hear a ‘click’ as they lock into place.
- Reconnect Battery: Reattach the negative battery terminal.
- Test All Functions: Start the vehicle and test all body-related functions: lights, locks, windows, radio, and wipers to confirm the repair.
Important Post-Installation Notes
In some cases, additional steps may be required:
- Airbag System Sync: If the airbag light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This syncs the security handshake between the airbag system and the new BCM.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor relearn to ensure proper brake light and traction control operation.
Disclaimer: Vehicle systems vary. Always refer to a factory service manual or consult a qualified technician if you are unsure about any step.
Guaranteed Vehicle Compatibility
This cloning service is for the Body Control Module in the following vehicles:
- 2011 – 2013 Chevrolet Caprice
This module, part number 25892622, also serves as a direct replacement for a wide range of other GM vehicles and supersedes numerous older part numbers. Please verify your original part number from the list below if you do not own a Caprice:
Compatible Part Numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Frequently Asked Questions
How does the cloning service work?
You send us your original, faulty BCM. We use specialized equipment to read all the critical data—including VIN, mileage, and key information—and transfer it directly onto the replacement module. We then ship both your original module and the ready-to-install replacement back to you.
Will I need to program my keys again?
No. Because we clone your original module’s data, the replacement BCM will recognize your existing keys. This is a major benefit that saves you time and money on locksmith or dealer fees.
What if my original BCM is completely dead or ‘fried’?
In most cases, even if the BCM is non-functional in the vehicle, we can still extract the necessary data from the memory chip. If for some reason the data is unrecoverable, we will contact you to discuss other options, such as programming with your VIN, which may require additional relearn procedures upon installation.
Do you keep my old BCM?
No, we do not require a core. Your original module is always returned to you along with the programmed replacement unit. This allows you to keep your original part.
Is this the right part to fix my specific problem?
The BCM controls many body and electronic functions. The symptoms listed on this page are strong indicators of a failing BCM. For a definitive diagnosis, it’s always best to have the vehicle scanned for codes by a professional technician. A faulty 2011-2013 Caprice BCM often stores communication codes (U-codes).