Is Your 2011 Chrysler 200 or Dodge Avenger Running Rough?
If you’re dealing with frustrating issues like a persistent check engine light, unpredictable stalling, poor fuel economy, or a complete no-start condition, the problem may lie with a failing Engine Control Module (ECM). The ECM is the brain of your vehicle’s 2.4L engine, managing everything from fuel injection and ignition timing to transmission shifting. When it starts to fail, it can cause a wide range of confusing and debilitating symptoms, leaving you stranded and facing a costly trip to the dealership.
The Simple, Direct-Fit Solution
Get your vehicle back to factory-spec performance with our direct replacement Engine Control Module. This isn’t just a part in a box; it’s a complete, ready-to-install solution. We take the hassle out of the repair by programming the unit specifically to your vehicle’s unique Vehicle Identification Number (VIN) and current mileage before it ships. This means no expensive dealer visits for programming, no special tools required, and no complicated setup. It arrives at your door ready for a true Plug & Play installation.
From the Diagnostic Bay
We had a 2011 Dodge Avenger come into the shop with a ghost of a problem. The owner complained of random stalling at traffic lights and occasional hesitation when accelerating. We checked the fuel system, spark plugs, and sensors, but everything tested fine. No consistent codes were being stored, just a few random communication errors. After hours of chasing wires, we decided to monitor the ECM’s live data streams. We noticed the injector pulse width signals were becoming erratic right before a stall. We swapped in one of our pre-programmed modules, and the car ran perfectly. The original ECM had an internal fault that only showed up under specific operating temperatures, a classic headache for technicians and owners alike. A simple component replacement solved a problem that had plagued the driver for months.
Why Choose Our 2011 Chrysler 200 ECM?
This isn’t just another part. It’s a comprehensive solution designed to get you back on the road with confidence. Our 2011 Chrysler 200 ECM is meticulously prepared to ensure a seamless repair process. We handle the complex programming so you can focus on the simple installation. Restore your vehicle’s reliability and drivability without the dealership price tag.
Common Symptoms of a Failing ECM
- ✔ Check Engine Light is illuminated
- ✔ Engine stalling or misfiring unpredictably
- ✔ Car won’t start, even with a good battery and starter
- ✔ Noticeable decrease in fuel efficiency
- ✔ Poor engine performance, hesitation, or rough idling
- ✔ Automatic transmission shifting issues
- ✔ Communication errors with diagnostic scan tools
Guaranteed Fitment
This module is a direct replacement for 2011 Chrysler 200 and 2011 Dodge Avenger models equipped with the 2.4L engine and a 6-speed automatic transmission. It is compatible with a wide range of original part numbers, ensuring you get the correct component for your vehicle. Please verify your part number against the list provided to ensure compatibility.
Compatible Part Numbers: 05150627AB, 68057006AA, 68057006AB, 68057006AC, 68057006AD, 68057006AE, 68057006AF, 68057006AG, 68057008AA, 68057008AB, 68057008AC, 68057008AD, 68057008AE, 68057008AF, 68057015AA, 68057015AB, 68057015AC, 68057015AD, 68057015AE, 68057015AF, 68057015AG, 68057015AH
Don’t let a faulty computer keep you off the road. Order this pre-programmed 2011 Chrysler 200 ECM today and restore your vehicle’s performance and reliability with a true Plug & Play solution.
Frequently Asked Questions
Do I need to have this computer programmed by a dealer?
No. This module comes fully programmed to your vehicle’s VIN and mileage before shipping. It is a Plug & Play solution, requiring no further programming or dealer intervention.
What information do you need from me?
We require your vehicle’s 17-digit VIN (Vehicle Identification Number) and current mileage at checkout. This information is essential for us to program the module correctly for your specific car.
Is this difficult to install?
Installation is straightforward for someone with basic mechanical skills. It typically involves disconnecting the battery, locating the old ECM, unplugging the electrical connectors, unbolting it, and then installing the new one in the reverse order. We always recommend consulting a repair manual for your specific vehicle’s procedure.
Will this fix my car’s problem for sure?
This module will correct issues directly caused by a faulty ECM. While the symptoms listed are common for ECM failure, they can also be caused by other failing components. Proper vehicle diagnosis is always recommended before ordering to ensure you are purchasing the correct part for your repair.
Does my original part number have to match exactly?
Your original part number should be on our compatibility list. This unit replaces multiple part numbers due to factory updates over time. As long as your original part number is listed, this module will function correctly in your vehicle.