Is Your 2011 Chrysler 200 or Dodge Avenger Running Rough?
The Engine Control Module (ECM), often called the engine computer, is the central command center for your vehicle’s engine. It meticulously manages everything from fuel injection and ignition timing to emissions controls and transmission communication. When the ECM in your 2011 Chrysler 200 or Dodge Avenger with the 2.4L engine begins to fail, it can trigger a cascade of frustrating and often difficult-to-diagnose problems. From a sudden check engine light to a car that won’t start, a faulty ECM can bring your daily drive to a halt.
Common Symptoms of a Failing Engine Computer
- ✔ Check Engine Light: The check engine light is illuminated, often with communication error codes (U-codes) or specific sensor circuit faults.
- ✔ No-Start or Hard Starting: The engine cranks but refuses to start, or takes an unusually long time to fire up, especially when warm.
- ✔ Poor Performance & Fuel Economy: You may notice a significant drop in power, sluggish acceleration, and a sudden decrease in your vehicle’s MPG.
- ✔ Engine Stalling: The engine may stall intermittently while driving or when coming to a stop, creating a dangerous situation.
- ✔ Erratic Shifting: Since the ECM works with the transmission controller, you might experience harsh or delayed gear shifts from your 6-speed automatic transmission.
- ✔ Misfires and Rough Idle: The engine runs unevenly, shakes at idle, or misfires, indicating incorrect fuel or spark management.
From the Diagnostic Bay
We had a 2011 Dodge Avenger come into the shop with a classic ghost problem. The owner complained of random stalling at red lights, but it would always start right back up. They had already replaced the fuel pump and crankshaft position sensor with no luck. After hooking up our diagnostic scanner and monitoring live data, we noticed the 5-volt reference signal for the sensors would intermittently drop out just before the engine stalled. This pointed directly to an internal failure in the ECM. We installed one of our pre-programmed units, and the Avenger was back on the road, running perfectly, the very same day. It’s a textbook example of how a failing computer can mimic other component failures.
The Right Solution for Your 2011 Chrysler 200 ECM
Don’t let a faulty engine computer keep you off the road. This replacement Engine Control Module is the definitive, hassle-free solution for your 2011 Chrysler 200 or Dodge Avenger. We take the guesswork and complexity out of the repair process. Unlike a generic part from a salvage yard or a big-box store, this unit is specifically prepared for your vehicle. We flash it with the latest Chrysler-approved software and program it directly to your vehicle’s unique Vehicle Identification Number (VIN) and current mileage. This ensures that all vehicle-specific systems, including the anti-theft system (immobilizer), function correctly right out of the box.
This is a true plug-and-play module. Simply disconnect the negative battery terminal, swap out your old ECM with this one, reconnect the battery, and start your car. There is absolutely no need for an expensive trip to the dealership for additional programming. This saves you both time and money, getting your car running reliably again. This is the ideal repair for both seasoned DIY mechanics and those looking for a straightforward fix. When you need a reliable 2011 Chrysler 200 ECM, this is the most dependable and convenient option available.
Compatible Part Numbers
This module is a direct replacement for a wide range of original equipment part numbers. Please verify that your original part number is on this list to ensure compatibility:
05150627AB, 68057006AA, 68057006AB, 68057006AC, 68057006AD, 68057006AE, 68057006AF, 68057006AG, 68057008AA, 68057008AB, 68057008AC, 68057008AD, 68057008AE, 68057008AF, 68057015AA, 68057015AB, 68057015AC, 68057015AD, 68057015AE, 68057015AF, 68057015AG, 68057015AH
Frequently Asked Questions
Is this ECM really plug-and-play?
Yes, absolutely. We program the module with your car’s specific VIN and mileage before it ships. This means it will integrate seamlessly with your vehicle’s existing systems, including the immobilizer, without needing any further programming from a dealer.
How do I provide my VIN and mileage?
After you place your order, you will be prompted to provide your vehicle’s VIN and current mileage. We cannot process the order without this information, as it is essential for the programming service.
Will this fix my check engine light?
If the check engine light is caused by a faulty ECM, then yes, this part will resolve the issue. However, it’s crucial to ensure the underlying problem isn’t a separate faulty sensor or wiring issue. We always recommend a proper diagnosis before ordering.
Where is the ECM located on a 2011 Chrysler 200?
On the 2011 Chrysler 200 with the 2.4L engine, the ECM is typically located in the engine bay, mounted to the firewall or near the driver’s side strut tower. It’s an aluminum box with several large electrical connectors.
Do I need any special tools for installation?
No special tools are required. You will need basic hand tools, such as a socket set, to disconnect the battery and unbolt the module. The entire process can usually be completed in under 30 minutes.