Is your 2010 GMC Yukon XL 1500 or other compatible GM vehicle suffering from strange and unpredictable electrical problems? A faulty Body Control Module (BCM) is often the culprit. The BCM acts as the central command center for your vehicle’s body electronics, managing everything from power windows and locks to the security system and interior lighting. When it fails, it can cause a cascade of frustrating issues that are difficult to diagnose.
This is a direct-replacement Body Control Module, part number 15828601, which is professionally programmed to your vehicle’s specific Vehicle Identification Number (VIN). This critical programming step ensures that the module communicates correctly with your vehicle’s other electronic systems right out of the box. Simply provide us with your VIN after purchase, and we’ll load the latest GM software updates, making installation as simple as possible. This eliminates the need for expensive trips to the dealership for programming.
We had a 2010 Tahoe come in with the classic signs of a BCM going bad. The owner complained that sometimes the radio would stay on after he left the truck, the power locks worked intermittently, and the security light would flash for no reason. He’d already replaced the battery, thinking it was a power issue. We scanned the vehicle and found multiple communication loss codes with the BCM. Installing a VIN-programmed 2010 Yukon XL Body Control Module like this one resolved all the phantom electrical issues in one go. It’s the central hub, and when it’s not working, nothing else will either.
Diagnosing a Failing BCM
A failing BCM can manifest in numerous ways. If you’re experiencing several of the following symptoms, your BCM is the likely cause. Replacing it with a correctly programmed unit is the definitive solution to restore your vehicle’s functionality and reliability.
- ✔ Power windows or door locks behaving erratically or not working at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The security system engaging randomly or preventing the vehicle from starting.
- ✔ Dashboard warning lights illuminating for no apparent reason.
- ✔ The radio or climate control system malfunctioning.
- ✔ A complete no-start condition where the starter doesn’t even click.
- ✔ Communication errors when a mechanic tries to scan the vehicle’s computer systems.
Post-Installation Procedures
While this module is programmed for plug-and-play installation, some vehicles may require additional relearn procedures after the BCM is installed. These are typically simple steps that can be performed with a capable diagnostic scan tool.
- Airbag System Sync: If the airbag warning light comes on after installation, the ‘Setup SDM Primary Key in BCM’ procedure will need to be performed with a professional diagnostic tool to sync the system and turn off the light. This is only required if the light is on.
- Brake Pedal Position Relearn: A brake pedal position sensor recalibration may be necessary on certain models to ensure proper brake light function and traction control system performance.
Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment
This module is a direct replacement for a wide range of original equipment part numbers, including: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084. It fits a variety of GM trucks, vans, and SUVs from approximately 2006 to 2013. Please verify your part number or consult the detailed fitment list to ensure compatibility.
Frequently Asked Questions
What is a Body Control Module (BCM)?
The BCM is a computer in your vehicle that controls and monitors most of the non-engine related electronic accessories, such as power windows, locks, lights, wipers, and the security system.
Why do you need my VIN?
Your vehicle’s VIN (Vehicle Identification Number) allows us to program the BCM with the exact software and settings for your specific model, year, and options. This ensures it works correctly without requiring a trip to the dealer for programming.
Is this part difficult to install?
The physical installation is typically straightforward, involving removing a few dash panels and unplugging the old module to plug in the new one. The location varies by model but is often under the steering column or behind the dash. The main benefit of our service is that the difficult programming is already done for you.
Will I need to do any additional programming myself?
No, the core programming is complete. However, as noted, some vehicles may require a simple ‘relearn’ procedure for the airbag system or brake pedal position sensor using a scan tool if related warning lights appear after installation.
What if my original part number isn’t 15828601?
This module replaces a long list of interchangeable part numbers. Please check the list provided in the description. As long as your original part number is on that list, this module will work for your vehicle once programmed to your VIN.
Is there a core charge for this part?
No, there is no core charge. You can keep your original module.