2010 Yukon Xl 1500 Body Control Module 15819552 Programmed To Your VIN VIN BCM

Restore Your Yukon’s Electrical System

Fix frustrating electrical issues with this direct-fit Body Control Module for your 2010 Yukon XL. It arrives pre-programmed to your vehicle’s VIN with the latest GM software, saving you a trip to the dealer. Get back on the road with confidence. Order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-453 Categories: ,
Guaranteed Safe Checkout

Restore Full Electrical Control to Your GM Vehicle

Are you battling frustrating and unpredictable electrical problems in your 2010 GMC Yukon XL 1500? Flickering lights, malfunctioning power windows, erratic dashboard warnings, or a security system that won’t cooperate are all classic signs of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it starts to fail, it can create a cascade of baffling issues. This replacement Body Control Module, part number 15819552, is the definitive solution to restore your vehicle’s functionality and your peace of mind.

Unlike a generic part from a local store, this BCM is delivered to you fully programmed to your vehicle’s specific Vehicle Identification Number (VIN). We load it with the latest GM software updates before it ships, eliminating the need for an expensive trip to the dealership for programming. This plug-and-play approach saves you significant time, money, and hassle, getting your Yukon, or other compatible GM vehicle, back on the road quickly and reliably.

Expert Pro Tip

Before condemning your BCM, always perform a full electrical system check. A weak battery, corroded battery terminals, or a poor chassis ground connection can mimic BCM failure symptoms. Ensure your battery voltage is above 12.4V with the engine off and that all primary ground straps are clean, tight, and free of corrosion. This simple check can save you from a costly misdiagnosis.

Diagnosing a Failing 2010 Yukon XL BCM

A faulty BCM can manifest in numerous ways, often intermittently at first. If you’re experiencing several of the following symptoms, it’s highly likely that your Body Control Module is the culprit. This unit is the direct solution for these common problems.

  • ✔ Power windows, door locks, or mirrors operating erratically or not at all.
  • ✔ Interior or exterior lights flickering, staying on, or failing to turn on.
  • ✔ The security system or keyless entry malfunctioning, causing alarm or starting issues.
  • ✔ Dashboard warning lights (like ABS, Airbag, or Check Engine) illuminating without a clear cause.
  • ✔ Wipers or radio behaving unpredictably.
  • ✔ Inaccurate readings on the instrument cluster gauges.
  • ✔ A vehicle that refuses to start despite a healthy battery and starter.

The Importance of VIN Programming

Modern vehicles like your 2010 Yukon XL 1500 use complex networks where modules must communicate perfectly. A BCM from another vehicle won’t work correctly because it’s programmed for a different set of options and security protocols. Our process ensures this module is a perfect digital match for your truck. By providing your VIN at checkout, you guarantee that the BCM we send is configured for your exact factory options, from the type of transmission to the specific radio and climate control system you have. This VIN-specific flashing is critical for proper function and avoids the compatibility issues that plague non-programmed modules.

Installation and Post-Install Considerations

Physically replacing the BCM is generally straightforward for a DIY mechanic with basic tools. It is typically located under the steering column or behind the dash. However, after the new module is installed, some vehicles may require one or more relearn procedures to fully sync the new BCM with other vehicle systems.

  • Airbag System Sync: If your airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This requires a professional-grade scan tool to sync the BCM with the airbag system’s Sensing and Diagnostic Module (SDM).
  • Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor might be needed to ensure correct brake light operation and to keep the traction control and stability control systems happy.

Please note: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance tailored to your vehicle.

Frequently Asked Questions

What exactly does the Body Control Module do?

The BCM is a computer that acts as the central hub for your vehicle’s body electronics. It controls non-engine-related functions like power windows, locks, lights, wipers, the security system, and the instrument cluster. When it fails, these systems can become unreliable.

How does the VIN programming process work?

After you place your order, you provide us with your vehicle’s 17-digit VIN. Our technicians use this number to access the official GM database and download the correct software and calibration files for your specific vehicle build. We then flash this data onto the BCM before shipping it to you.

Is this a difficult part to install myself?

For someone with moderate mechanical experience, the physical installation is typically not difficult. The BCM is usually accessible under the driver’s side dashboard. The main challenge can be the post-installation relearn procedures, which may require a high-end diagnostic scan tool.

What happens if I don’t perform the post-install procedures?

If a procedure like the Airbag System Sync is required and not performed, the airbag warning light will remain on, and the system may not function correctly. Similarly, skipping the brake pedal relearn could lead to issues with brake lights or traction control. It’s best to perform any required relearns for full system functionality and safety.

Is there a core charge for my old BCM?

No, there is no core charge for this part. You can keep your original module without needing to send it back to us.

Genuine OEM
Year

Condition
MPN

15819552

Interchange part number
PartNumber
Model

Yukon Xl 1500

Year
Brand
Manufacturer Part Number
Scroll to Top