Is Your Yukon XL Acting Possessed?
If your 2010 GMC Yukon XL 1500 is suffering from a case of the electrical gremlinsโflickering lights, power windows with a mind of their own, intermittent starting issues, or random warning lights on the dashโthe culprit is very often a failing Body Control Module (BCM). As a technician with over two decades of experience, I’ve seen these exact symptoms hundreds of times. The BCM is the central nervous system for your vehicle’s comfort and convenience features, and when it starts to fail, it can make driving a frustrating and unpredictable experience.
A Real-World Scenario
“A customer’s 2010 Yukon XL 1500 came into my shop last week with a laundry list of bizarre issues. The radio would turn off randomly, the interior dome lights wouldn’t work, and the security light stayed on, preventing the truck from starting half the time. After confirming the battery and grounds were solid, my diagnostic scan tool pointed directly to communication errors with the BCM. A failing BCM was scrambling signals across the entire vehicle network. Replacing it with a pre-programmed unit like this one solved every single issue instantly.”
The Plug-and-Play Solution for Your 2010 Yukon XL 1500 BCM
Don’t let a faulty BCM keep your truck sidelined. This is a direct-fit replacement Body Control Module, and we take the biggest headache out of the repair process for you. We will program the module to your vehicle’s specific VIN before we ship it. This means it arrives at your door ready for installation, loaded with the latest GM software updates to ensure optimal performance and reliability.
- โ VIN Programmed & Ready to Install: We flash the module with your vehicle’s VIN, eliminating the need for an expensive trip to the dealership for programming.
- โ Restores Full Functionality: Puts an end to erratic electrical behavior and gets your power windows, locks, lights, and other accessories working correctly again.
- โ Latest GM Software: Comes with the most current software from General Motors, often correcting factory bugs you didn’t even know you had.
- โ Guaranteed Compatibility: This module is a direct replacement for part number 25892622 and a wide range of other GM part numbers.
Simple Installation Process
Replacing the BCM on your Yukon is a straightforward job that a confident DIYer can handle. Here are the basic steps:
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
- Locate the BCM: On your 2010 Yukon XL 1500, the Body Control Module is located under the steering column, on the driver’s side of the dash.
- Swap the Module: Carefully unplug the electrical connectors from the old BCM. Unbolt it from its mounting bracket and remove it. Install the new module in its place and securely reconnect all electrical plugs.
- Reconnect & Test: Reconnect the negative battery terminal. Start the vehicle and test all body functionsโwindows, locks, radio, lights, and wipersโto confirm the repair was successful.
Expert Pro Tip: Check for Water Intrusion
Before you install your new BCM, take a moment to inspect the area around the old module for any signs of moisture, water stains on the carpet, or rust on nearby metal brackets. A common cause of BCM failure on these trucks is a water leak from the windshield seal or A-pillar area. A simple visual check can help you find and fix the root cause, preventing a repeat failure of your new part.
Important Final Steps After Installation
To finalize the installation and ensure all vehicle systems operate correctly, a few additional procedures are required. These steps typically require a professional-grade bidirectional scan tool.
- Airbag System Reset: You must perform the ‘Setup SDM Primary Key in BCM’ procedure. This is a security handshake between the new BCM and the airbag module (SDM). If this is not done, the airbag warning light will remain illuminated on your dash.
- Brake Pedal Position Sensor Relearn: Some vehicles may require the Brake Pedal Position Sensor to be recalibrated after BCM replacement to ensure proper brake light operation and stability control function.
Part Number Compatibility
This BCM is a direct replacement for a vast number of GM vehicles. If your original module has any of the following part numbers, this unit will work for your vehicle after being programmed to your VIN:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084