Is Your 2010 Yukon Plagued by Electrical Gremlins?
Are you dealing with flickering dashboard lights, power windows that have a mind of their own, or a security system that randomly goes off? These aren’t just annoyances; they’re classic symptoms of a failing Body Control Module (BCM). In my 20+ years as a technician, I’ve seen this exact scenario play out hundreds of times on GM trucks and SUVs. The BCM is the central nervous system for your vehicle’s body electronics, and when it starts to fail, it can create a cascade of frustrating and unpredictable problems.
Real-World Diagnosis: “A customer’s 2010 Yukon Denali came into my shop last week with a dead radio, dome lights that wouldn’t turn off, and a ‘Service Stabilitrak’ message that wouldn’t clear. His remote start was also inoperative. A quick scan with my diagnostic tool revealed multiple communication loss codes (U-codes) all pointing back to one culprit: the BCM. The internal relays and solder joints on these modules can degrade over time, leading to intermittent connections and total failure. This isn’t just a guess; it’s a pattern I’ve diagnosed and fixed countless times.”
The Simple, Dealer-Free Solution: A VIN-Programmed 2010 Yukon Body Control Module
Forget the hassle and high cost of a dealership visit. We provide a direct, effective solution. This Body Control Module, part number 25847588, is the answer to restoring your Yukon’s functionality. The best part? We handle the programming for you. Simply provide your vehicle’s VIN during checkout, and our experts will flash the module with the latest GM software specific to your Yukon’s options. It arrives at your door ready for installation.
- โ VIN Programmed & Ready to Install: We load your vehicle’s specific software before shipping. No dealer programming required.
- โ Restores Full Functionality: Fixes common issues with lighting, power locks, windows, key fobs, and security systems.
- โ Direct-Fit Replacement: Engineered to be a perfect match for the original BCM, ensuring a straightforward swap.
- โ Cost-Effective Repair: Save hundreds of dollars compared to dealership parts and labor costs.
Easy Installation Guide
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Locate the BCM: On the 2010 Yukon, the BCM is located under the driver’s side of the dashboard, typically to the left of the steering column.
- Disconnect the Old Module: Carefully release the locking tabs on the multiple electrical connectors and pull them straight out. Then, unbolt or unclip the old BCM from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed BCM in place. Firmly reconnect all electrical connectors, ensuring they click securely into place.
- Reconnect Power: Reattach the negative battery terminal.
- Perform Final Steps: Follow the critical post-installation procedures outlined below to ensure all systems are synchronized.
Important: Post-Installation Procedures Required
After installing your new BCM, a couple of final steps are necessary to ensure all vehicle systems communicate correctly. This is a normal part of the process and is required for safety and functionality.
- Airbag System Sync: The ‘Setup SDM Primary Key in BCM’ procedure must be performed using a compatible bi-directional scan tool. This re-establishes the security handshake between the BCM and the airbag system (SDM), which will clear the airbag warning light on the dash.
- Brake Pedal Position Sensor Relearn: Some vehicles require a brake pedal position sensor relearn. This procedure recalibrates the sensor to the new BCM, ensuring accurate input for the anti-lock brake and stability control systems.
Note: If you are not familiar with these procedures or do not have the required tools, we strongly recommend seeking assistance from a qualified professional technician.
This Module is a Direct Replacement for the Following Part Numbers:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
Verified Vehicle Fitment:
This BCM fits a wide range of GM vehicles, including but not limited to: GMC Yukon, Yukon XL, Sierra, Savana; Chevrolet Tahoe, Suburban, Avalanche, Silverado, Express; Cadillac Escalade, DTS, CTS; Buick Enclave, Lucerne, and more. Please verify your part number to ensure compatibility.