Restore Full Functionality to Your GM Vehicle
Are you dealing with baffling electrical issues in your 2010 GMC Yukon or another compatible GM vehicle? Flickering lights, malfunctioning power windows or locks, a security system that acts up, or warning lights that won’t turn off are classic signs of a failing Body Control Module (BCM). As the central command center for your vehicle’s electronic accessories, a faulty BCM can turn your daily drive into a frustrating and unpredictable experience. This isn’t just an inconvenience; it can be a safety concern when essential systems like lighting and security are compromised.
This replacement Body Control Module, part number 95151084, is the definitive solution. We take the guesswork and high costs out of the equation with our expert cloning service. Simply provide your vehicle’s VIN at checkout, and our technicians will program this module with the latest GM software specific to your vehicle. This means no expensive trips to the dealership for programming—it arrives at your door ready for installation.
Is Your GM Vehicle Showing These Symptoms?
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors working intermittently or not at all.
- ✔ The security system or keyless entry failing to operate correctly.
- ✔ Unexplained battery drain that leaves you stranded.
- ✔ Warning lights on the dashboard, such as the airbag or brake system light.
- ✔ Diagnostic trouble codes (DTCs) related to communication errors, like U0140, U0155, or other U-series codes.
A Technician’s Notebook
I recently had a 2010 Yukon in the bay with a laundry list of what the owner called “ghosts in the machine.” The dome lights would stay on, the driver’s side window wouldn’t go down, and the remote start was useless. A scan showed a dozen communication codes, all pointing back to the BCM. These modules are notorious for internal circuit board failures, often due to moisture intrusion or simple age. Swapping in a pre-programmed BCM like this one solved every single issue in under an hour. The cloning service is a game-changer, saving my customers hundreds in dealer programming fees and getting their truck back to normal fast.
A Straightforward Guide to BCM Installation
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- ✔ Locate the BCM: On most GM trucks and SUVs like the Yukon and Tahoe, the BCM is located under the driver’s side dashboard, near the steering column. For vans and other models, it may be in the center dash area. A quick search for your specific model will confirm its location.
- ✔ Remove Trim Panels: You will likely need to remove a lower dash panel or knee bolster to gain access. These are typically held by a few screws or clips.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- ✔ Install the New Module: Mount your new, pre-programmed BCM in the same location and reconnect all electrical connectors, ensuring they click securely into place.
- ✔ Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all body functions—lights, locks, windows, wipers, etc.—to confirm proper operation.
Important Post-Installation Steps
While our cloning service makes this a near plug-and-play repair, some vehicle systems may require a ‘handshake’ with the new BCM. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure correct brake light and traction control operation.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step of the process.
Verified Vehicle Compatibility
This module is a direct replacement for a wide range of General Motors vehicles and interchanges with numerous part numbers to ensure a perfect match. Please confirm your vehicle is on the list below. This part is compatible with the following original equipment part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.
Frequently Asked Questions
Why do you need my VIN?
Your Vehicle Identification Number (VIN) allows us to program the Body Control Module with the exact software and vehicle-specific options from the factory. This ensures all features work correctly and makes the installation process much simpler for you.
Is this a plug-and-play part?
Yes, for the vast majority of functions. Because we use a cloning service to transfer your vehicle’s data, it is designed to be as close to plug-and-play as possible. However, as noted, certain security systems like the airbag module may require a quick synchronization procedure with a scan tool after installation.
Do I need to send my old BCM back?
No, there is no core charge or return required for this part. We ship you the programmed replacement BCM, and your original module is always returned to you along with the new unit.
What tools are needed for the post-installation procedures?
The potential Airbag System Sync and Brake Pedal Position Relearn procedures require a professional-grade bidirectional scan tool. Most basic code readers cannot perform these functions. If you are a DIYer, many local repair shops can perform these relearn procedures for a small fee.