Is Your Yukon Plagued by Electrical Gremlins?
Are you dealing with flickering dashboard lights, power windows with a mind of their own, or a security system that randomly acts up? These aren’t just annoyances; they’re classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics. When it starts to fail, it can cause a cascade of frustrating and unpredictable problems. Stop chasing symptoms and address the root cause with a reliable, pre-programmed replacement.
The Direct-Fit Solution: A Pre-Programmed 2010 Yukon Body Control Module
This isn’t just a replacement part; it’s a complete solution. We take the guesswork and dealership hassle out of the repair. Simply provide your vehicle’s VIN during checkout, and our technicians will program this module with the latest GM software specific to your 2010 Yukon. It arrives at your door ready for installation, saving you from expensive dealer programming fees and lengthy service appointments.
- ✔ VIN Programmed & Ready to Install: We flash the module with your vehicle’s specific data and the newest GM updates for optimal performance.
- ✔ Eliminate Electrical Issues: A direct solution for common problems like faulty interior/exterior lights, malfunctioning power locks and windows, and incorrect instrument panel readings.
- ✔ OEM-Matched Functionality: Restores communication between all your vehicle’s electronic comfort and security features.
- ✔ Broad GM Compatibility: While perfect for the Yukon, this module also fits a wide range of other GM vehicles. Please verify your part number from the list below.
A Real-World Scenario from My Shop
A customer brought in a 2010 Tahoe—a sibling to the Yukon—with a baffling issue. The radio would shut off, the driver’s side power window wouldn’t work, and the anti-theft light was on, preventing the truck from starting intermittently. A scan showed a dozen communication codes, all pointing to a network failure. Instead of replacing random parts, we identified the BCM as the culprit. By installing one of our pre-programmed modules, we had the truck running perfectly in under an hour, saving the customer hundreds compared to the dealership’s quote for the part and programming labor.
Simple Installation, Critical Final Steps
Replacing the BCM is a straightforward job for a confident DIYer or any professional technician. However, to ensure all vehicle systems operate safely and correctly, a few post-installation procedures are required.
- Safety First: Always disconnect the negative battery terminal before working on any vehicle electronics.
- Locate the BCM: On the 2010 Yukon, the Body Control Module is typically found under the steering column, accessible from the driver’s side footwell.
- Swap the Module: Carefully disconnect the wiring harnesses from the old BCM, unbolt it, and install the new module in its place. Reconnect the harnesses securely.
- Reconnect Battery: Once the new BCM is installed, reconnect the negative battery terminal.
- Perform System Resets: This is a critical step. You will need a professional-grade diagnostic scan tool to perform two key functions: the ‘Setup SDM Primary Key in BCM’ to ensure the airbag system is operational and reset its warning light, and a ‘Brake Pedal Position Sensor Calibration’ if required for your vehicle.
Compatible Part Numbers:
This module is a direct replacement for the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.
Frequently Asked Questions
How do I know if my BCM is the problem?
Common symptoms include multiple, unrelated electrical failures happening at once. This can be anything from erratic power locks, windows, and lights to issues with the security system, instrument cluster warnings, or even a no-start condition.
What does ‘Programmed to my VIN’ actually mean?
It means we load the module with the specific software and settings your vehicle’s options require, based on its unique Vehicle Identification Number (VIN). This ensures it communicates perfectly with your engine computer, transmission module, and other electronics right out of the box.
Is this BCM hard to install?
The physical replacement is a simple plug-and-play process. However, the post-installation steps, like resetting the airbag system (SDM key setup), require a professional scan tool. Most independent repair shops have this tool, allowing you to avoid expensive dealership programming.
Why do I need to perform procedures after installation?
These procedures are vital for safety. The BCM must be properly introduced to the airbag system (SDM) to ensure it functions in a collision. Similarly, brake pedal calibration ensures the brake lights and stability control system receive accurate information from the pedal sensor.