Restore Full Electrical Function to Your GM Vehicle
Are you battling bizarre electrical issues in your 2010 GMC Yukon or another compatible GM vehicle? Flickering dashboard lights, power windows with a mind of their own, or a security system that prevents your truck from starting are classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can create a cascade of frustrating and seemingly unrelated problems. This isn’t just an annoyance; it can affect vehicle safety and reliability. Stop chasing electrical gremlins and get the definitive solution with this direct-fit BCM, professionally programmed to your vehicle’s specific VIN.
A Technician’s Notebook: The Haunted 2010 Yukon
Just last month, a 2010 Yukon was towed into my bay. The owner was at his wit’s end. The interior lights would pulse randomly, the radio would shut off, and occasionally, the truck wouldn’t start, displaying a ‘Service Theft Deterrent System’ message. He’d already replaced the battery and checked the grounds. After connecting my diagnostic scanner, I saw multiple communication loss codes with various modules. This pointed away from a single component and towards the network’s central controller. In my 20+ years of experience, these symptoms almost always lead back to the BCM. We installed a VIN-programmed module, performed the necessary key relearn and SDM setup, and the truck’s electrical gremlins vanished. It’s a common failure, but one with a straightforward fix.
Is Your Vehicle Showing These Symptoms?
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Erratic interior or exterior lighting, including flickering or dimming.
- ✔ Warning lights on the dashboard for the security system, airbags, or brakes.
- ✔ The vehicle’s theft-deterrent system activating incorrectly, causing a no-start condition.
- ✔ Unresponsive key fob or remote entry features.
- ✔ Communication errors with other vehicle control modules.
A Straightforward Guide to Your BCM Installation
Installing your new 2010 Yukon BCM is a manageable task for a confident DIYer. The key is our pre-programming service, which eliminates the need for expensive dealer tools. Just provide your VIN at checkout, and we handle the rest.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- Locate the BCM: On most GMT900 trucks like the Yukon, Tahoe, and Suburban, the BCM is located under the driver’s side of the dashboard, near the steering column.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New Module: Mount the new, pre-programmed BCM in the same location and securely reconnect all electrical connectors.
- Reconnect Battery: Reattach the negative battery terminal.
- Perform Final Procedures: You must perform the ‘Setup SDM Primary Key in BCM’ procedure with a capable scan tool to ensure the airbag system communicates correctly. A brake pedal position sensor relearn may also be required. These are critical safety steps.
Verified Vehicle Compatibility
This Body Control Module is a direct replacement for a wide range of General Motors vehicles. Please verify your part number or match your vehicle from the list below. This module is compatible with part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.
- Acadia 2007-2012
- Avalanche 1500 2010
- Caprice 2011-2013
- Captiva Sport 2012
- CTS 2008-2013
- DTS 2006-2011
- Enclave 2008-2012
- Equinox 2007-2009
- Escalade / ESV / EXT 2010
- Express Van 1500/2500/3500 2008-2012
- G8 2008-2009
- Hummer H2 2008-2009
- Impala 2006-2013
- Lucerne 2006-2011
- Monte Carlo 2006-2007
- Outlook 2007-2010
- Savana Van 1500/2500/3500 2008-2012
- SRX 2007-2009
- STS 2010
- Suburban 1500 2010
- Tahoe 2010
- Torrent 2007-2009
- Traverse 2009-2012
- Vue 2008-2010
- Yukon / Yukon XL 1500 2010
Frequently Asked Questions
Do I need to program this BCM?
No. We program the module to your vehicle’s VIN before shipping it to you. This ensures it is ready for installation and saves you a costly trip to the dealership.
Where is the BCM located on my 2010 Yukon?
The Body Control Module on a 2010 Yukon BCM is typically found under the driver’s side dashboard, mounted near the steering column and firewall.
What is the ‘Setup SDM Primary Key’ procedure?
This is a required security step that uses a diagnostic scan tool to create a handshake between the new BCM and the airbag system’s Sensing and Diagnostic Module (SDM). It is essential for ensuring the airbag system functions correctly and turns off the warning light.
Will this part fix my security light and no-start problem?
A faulty BCM is a very common cause of issues with the GM Passlock and Passkey III anti-theft systems. Replacing it with this pre-programmed module is a highly effective solution for these specific symptoms.
Can I install this myself?
Yes, if you are comfortable with basic automotive repairs. The physical replacement is straightforward. However, be aware that post-installation procedures like the SDM key setup and brake pedal relearn require a bi-directional scan tool, which you may need to access through a local mechanic if you don’t own one.