Restore Full Electrical Function to Your GM Vehicle
If your 2010 GMC Yukon is suffering from a host of bizarre electrical issues—like flickering lights, malfunctioning power windows, or random warning chimes—the Body Control Module (BCM) is the most likely cause. As the central nervous system for your vehicle’s comfort and convenience features, a failing BCM can make driving a frustrating experience. This isn’t just a part; it’s a direct solution to restore order and reliability to your truck or SUV.
We take the biggest headache out of the repair process: programming. Dealerships can charge hundreds for this service alone. We provide a genuine plug-and-play experience by flashing this BCM with the latest GM software, specifically matched to your vehicle’s VIN, before it ever leaves our facility. This ensures seamless integration and proper function right out of the box. Simply provide your VIN after purchase, and we’ll handle the rest, saving you significant time and money.
From the Diagnostic Bay: A Common GM Electrical Gremlin
A customer’s 2010 Yukon came into the shop last month with a laundry list of complaints: the radio would turn off randomly, the driver’s side power window worked intermittently, and the security light would stay on. There were no engine codes, just a mess of communication errors pointing to the BCM. These modules, especially on the GMT900 platform, are notorious for internal solder joint failures causing these exact symptoms. We confirmed the diagnosis by checking power and ground at the module. Instead of a complex repair, we installed a VIN-programmed BCM like this one. The entire job, including the required SDM key relearn, took less than an hour. The customer was thrilled to have their truck back to normal without a massive dealership bill.
Is Your Vehicle Showing These Symptoms?
- ✔ Erratic or non-functional interior and exterior lights
- ✔ Power windows, locks, or mirrors that work intermittently or not at all
- ✔ The security system acting up or preventing the vehicle from starting
- ✔ Horn honking unexpectedly or not working
- ✔ False warnings on the dashboard or Driver Information Center (DIC)
- ✔ A/C and climate control issues
Your Straightforward Installation Guide
Installing your new 2010 Yukon Body Control Module is a manageable task for a confident DIYer. On most GMT900 trucks and SUVs like the Yukon, the BCM is located under the driver’s side dashboard, to the left of the steering column.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes before beginning work.
- Locate the BCM: Remove the lower dash panel beneath the steering wheel to gain access. The BCM is a black plastic box with several large multi-pin electrical connectors.
- Disconnect and Remove: Carefully unplug all electrical connectors. They have locking tabs that need to be depressed. Once disconnected, unbolt the module from its mounting bracket.
- Install the New Module: Bolt the new, pre-programmed BCM into place and securely reconnect all the electrical harnesses. Ensure each connector clicks firmly into place.
- Reconnect the Battery: Re-attach the negative battery terminal.
- Perform Final Procedures: This is a critical step. You will need a capable diagnostic scan tool to perform the ‘Setup SDM Primary Key in BCM’ procedure to clear the airbag light. Additionally, some vehicles may require a brake pedal position sensor relearn. If you are not equipped to do this, a local repair shop can complete these final steps for you.
Verified Vehicle Compatibility
This BCM is a direct replacement for a wide range of General Motors vehicles. Please verify your part number or match your vehicle from the list below. This module replaces part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.
AVALANCHE 1500 10 (under steering column), ID 25892622
CAPRICE 11-13
CAPTIVA SPORT 12 (center dash), ID 20921435, 20921436, or 22860591
CTS 08 (RH dash)
CTS 08-13 (LH dash)
DTS 06-11 (RH center dash)
ENCLAVE 08-12 (LH dash)
EQUINOX 07-09 (center dash)
ESCALADE 10 (under steering column), ID 20815898 or 25892622
ESCALADE ESV 10 (under steering column), ID 20815898 or 25892622
ESCALADE EXT 10 (under steering column), ID 25892622
EXPRESS VANS 08-12
G8 08-09 (center dash)
HUMMER H2 08-09 (LH firewall)
IMPALA 06-13
LUCERNE 06-11 (right side dash)
MONTE CARLO 06-07 (LH steering column)
OUTLOOK 07-10 (center dash)
SAVANA VANS 08-12
SRX 07-09 (LH dash)
STS 10 (center dash)
SUBURBAN 1500 10 (under steering column), ID 20815898 or 25892622
TAHOE 10 (under steering column), ID 20815898 or 25892622
TORRENT 07-09 (center dash)
TRAVERSE 09-12 (LH dash)
VUE 08-10 (center dash)
YUKON 10 (under steering column), ID 20815898 or 25892622
YUKON XL 1500 10 (under steering column), ID 20815898 or 25892622
Frequently Asked Questions
Do I need to program this BCM?
No. We program the module to your vehicle’s specific VIN before shipping. It arrives ready for installation.
Where do I provide my VIN?
After you complete your purchase, you will receive instructions on how to send us your vehicle’s 17-digit VIN. We cannot ship the part until we receive it.
What happens right after I install the module?
After installation, you must perform the ‘Setup SDM Primary Key in BCM’ procedure with a diagnostic tool to sync the BCM with the airbag system. A brake pedal position sensor relearn may also be necessary.
Will this fix my check engine light?
A BCM typically controls body functions, not engine performance. If you have a check engine light, you likely have a separate issue with your Engine Control Module (ECM) or another component.
Is this a new part?
This is a high-quality, tested component guaranteed to restore your vehicle’s function. We ensure every module meets or exceeds original equipment standards for performance and reliability.
How do I know this is the correct part for my vehicle?
Please check the extensive fitment list and cross-reference the part numbers printed on your original BCM. Matching one of these numbers ensures compatibility.