Tired of Electrical Gremlins in Your 2010 Yukon?
As a technician with over two decades of experience, I’ve seen it all. Flickering lights, power windows with a mind of their own, a security light that won’t turn off, or worse—a vehicle that refuses to start. These frustrating and often intermittent issues frequently point to one component: a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s electronics, and when it starts to go, it can cause chaos. This isn’t just an inconvenience; it can affect safety systems and leave you stranded. Stop chasing electrical ghosts and get the definitive fix.
This is a direct-fit replacement 2010 Yukon Body Control Module that arrives at your door ready for installation. We take the guesswork and dealer expense out of the equation with our professional cloning service. Simply provide your vehicle’s VIN after purchase, and we will flash the module with the latest GM software specific to your Yukon. This ensures all your factory options and security information are correctly transferred, making the installation process as seamless as possible.
Case Study: A Tricky Diagnosis
A customer brought in their 2010 Tahoe (which uses the same platform as the Yukon) with a laundry list of bizarre problems: the radio would turn on and off, the driver’s side power window worked only when it wanted to, and the anti-theft system would randomly engage, preventing the truck from starting. They had already replaced the battery and checked all the fuses. A scan showed a U0140 code (Lost Communication With Body Control Module) along with several other intermittent communication faults. After verifying the power and ground connections to the BCM were solid, it was clear the module itself was failing internally. Swapping in a cloned BCM like this one solved every single issue instantly. The customer was thrilled to have their truck back to normal without a costly trip to the dealership.
Is Your GM Vehicle Showing These Symptoms?
A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following, this module is likely the solution you need:
- ✔ Erratic or non-functional power windows, door locks, or interior lights.
- ✔ The security or anti-theft light stays on, often causing a no-start condition.
- ✔ Dashboard warning lights appearing randomly (e.g., ABS, Airbag, Traction Control).
- ✔ Inconsistent operation of the horn, windshield wipers, or remote keyless entry.
- ✔ Diagnostic trouble codes (DTCs) related to communication errors, such as U0140, U0155, or B1001.
- ✔ Rapid battery drain while the vehicle is parked.
A Straightforward Guide to Installation
Installing your replacement 2010 Yukon Body Control Module is a manageable job for a DIY enthusiast or any professional mechanic. While the exact location can vary slightly by model, it’s typically found under the driver’s side dashboard.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
- Locate the BCM: On most GMT900 trucks like the Yukon and Tahoe, the BCM is located under the driver’s side of the dashboard, to the left of the steering column. You may need to remove a lower dash panel for access.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all the electrical harnesses. Ensure they click into place.
- Reconnect Power: Reattach the negative battery terminal.
- Perform Relearn Procedures: Start the vehicle. As noted below, you may need to perform a Brake Pedal Position Relearn or an Airbag System Sync if specific warning lights are present. Test all body functions (lights, locks, windows, etc.) to confirm the repair.
Important Notes After Installation
Our cloning service handles the heavy lifting, but some GM vehicles require a final handshake between modules after installation. Be aware of these potential procedures:
- ✔ Airbag System Sync: If your airbag warning light is illuminated after the swap, a simple “Setup SDM Primary Key in BCM” procedure is needed. This requires a professional-grade scan tool and syncs the new BCM with the airbag system.
- ✔ Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be necessary to ensure correct brake light and stability control operation. This can also be done with a capable scan tool.
Guaranteed Vehicle Compatibility
This module is a direct replacement for a wide range of GM vehicles and part numbers. We guarantee compatibility if your vehicle and original part number are on this list. This BCM is a confirmed fit for the 2010 Yukon Body Control Module and is also interchangeable with the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084.
It fits a broad array of models including, but not limited to:
- ✔ Acadia (2007-2012)
- ✔ Avalanche 1500 (2010)
- ✔ CTS (2008-2013)
- ✔ Enclave (2008-2012)
- ✔ Escalade, ESV, EXT (2010)
- ✔ Express & Savana Vans (2008-2012)
- ✔ Impala (2006-2013)
- ✔ Suburban 1500 (2010)
- ✔ Tahoe (2010)
- ✔ Traverse (2009-2012)
- ✔ Yukon & Yukon XL 1500 (2010)
Frequently Asked Questions
Do I need to do any programming myself?
No. This is a complete cloning service. We transfer all the necessary data from your original BCM to this replacement unit before shipping it. It arrives ready to be installed.
How does the cloning process work?
After you place your order, you will need to send us your original BCM. Our technicians will use specialized equipment to extract the vehicle-specific software and security data and flash it onto the replacement module. This ensures a perfect match for your vehicle’s options and anti-theft system.
Do I need to send you my VIN?
Yes. While we clone the data from your original module, providing the VIN allows us to double-check for any applicable software updates from GM, ensuring your replacement BCM is loaded with the best possible software.
What is your core policy?
We do not require a core in the traditional sense. Your original module is used for the data cloning process and will be returned to you along with your newly programmed replacement unit.
What if my airbag light comes on after installation?
This is a known possibility on some GM models. It simply means the new BCM needs to be electronically introduced to the airbag module (SDM). A mechanic with a bi-directional scan tool can perform the “Setup SDM Primary Key in BCM” procedure in a few minutes to resolve this.
Is this part difficult to install?
For someone with basic mechanical skills, it is not a difficult job. It involves removing a dash panel and swapping the module. The most important part is our cloning service, which eliminates the need for complex computer programming on your end.