Restore Your GM’s Electrical System with a Reliable, Programmed BCM
Are you battling frustrating electrical gremlins in your 2010 GMC Yukon or another compatible GM vehicle? Issues like flickering lights, malfunctioning power windows, erratic door locks, or false warning messages on the dash are classic signs of a failing Body Control Module (BCM). As the central command for your vehicle’s body electronics, a faulty BCM can make your daily drive unpredictable and annoying. I’ve seen it countless times in my 20+ years in the shop—what seems like multiple unrelated problems often traces back to this single component.
This isn’t just a replacement part; it’s a complete solution. We take the guesswork and high dealership costs out of the equation. Simply provide your vehicle’s VIN after purchase, and our experts will program this BCM with the latest GM software updates specific to your vehicle. This ensures it communicates perfectly with your truck’s other modules right out of the box, saving you from needing a proprietary scan tool or a trip to the dealer for programming.
A Technician’s Notebook: The Case of the Haunted Yukon
A customer brought in his 2010 Yukon last month, completely fed up. He said his truck felt “haunted.” The radio would change stations on its own, the interior lights would stay on, and the security light would flash randomly, sometimes preventing it from starting. He had already replaced the battery and checked the grounds. After connecting my diagnostic tool, I saw a slew of communication error codes pointing toward the BCM. We installed one of these VIN-programmed modules, performed the quick post-install procedures, and all the spooky electrical issues vanished. It’s a common failure, and this is the straightforward, reliable fix.
Common Signs of a Failing BCM
If your vehicle is experiencing any of the following, a faulty BCM is the likely culprit. Replacing your failing 2010 Yukon Body Control Module can resolve these issues and restore proper function.
- ✔ Intermittent or non-working headlights, taillights, or interior lights.
- ✔ Power windows or door locks operating erratically or not at all.
- ✔ The security system acting up, causing no-start conditions.
- ✔ False warnings on the instrument cluster (e.g., “Service Airbag,” “Service StabiliTrak”).
- ✔ Horn not working or sounding randomly.
- ✔ Problems with the windshield wipers or radio controls.
A Straightforward Guide to Installation
Installing your new BCM is a manageable job for a confident DIYer. While the exact location varies by model (typically under the steering column or behind the dash), the general process is similar. Always consult a service manual for your specific vehicle.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Locate the BCM: On a 2010 Yukon, the BCM is typically located under the driver’s side of the dashboard, near the steering column. You may need to remove a lower dash panel for access.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old module. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old BCM and remove it.
- Install the New Module: Mount your new, pre-programmed BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
- Reconnect Battery: Reattach the negative battery terminal.
- Perform Relearn Procedures: This is a critical final step. You will need a capable diagnostic tool to perform the ‘Setup SDM Primary Key in BCM’ procedure to clear the airbag light. A brake pedal position sensor relearn may also be required. This ensures all systems communicate correctly for full functionality and safety.
Will This Fit My Vehicle?
This Body Control Module is a direct replacement for a wide range of General Motors vehicles and interchanges with numerous part numbers. While it is the correct 2010 Yukon Body Control Module, it also fits many other models. Please verify your part number or provide your VIN to guarantee compatibility. Key compatible models include:
- GMC Yukon / Yukon XL (2010)
- Chevrolet Tahoe / Suburban / Avalanche (2010)
- Cadillac Escalade / ESV / EXT (2010)
- GMC Acadia (2007-2012)
- Chevrolet Traverse (2009-2012)
- Buick Enclave (2008-2012)
- Chevrolet Impala (2006-2013)
- Chevrolet Express Van (2008-2012)
- GMC Savana Van (2008-2012)
- And many more models. This module replaces part numbers: 10382479, 15093910, 15276271, 15819552, 20815898, 25892622, and others.
Frequently Asked Questions
Do I need to program this BCM?
No. We program the module to your vehicle’s specific VIN before shipping it to you. This saves you a costly trip to the dealership. Some minor post-installation relearn procedures may be necessary.
What information do you need from me?
After you complete your purchase, you will need to provide us with your vehicle’s 17-digit VIN (Vehicle Identification Number). We cannot program and ship the module without it.
What tools are needed for the post-installation procedures?
You will need a professional-grade diagnostic scan tool to perform the ‘Setup SDM Primary Key in BCM’ (for the airbag system) and potentially a ‘Brake Pedal Position Sensor Relearn’. Many independent shops have these tools if you don’t own one.
Is this a reliable part?
Absolutely. This is a high-quality replacement BCM programmed with the latest stable software from GM. It is designed to restore original functionality and provide a long-lasting solution to your vehicle’s electrical issues.
Will this 2010 Yukon Body Control Module fix my no-start problem?
It can. A failing BCM is a common cause of security system-related no-start or intermittent starting problems in these GM vehicles. If your security light is flashing, this is a very likely solution.