Restore Full Electrical Function to Your GM Vehicle
Are you battling frustrating electrical problems in your 2010 Chevy Tahoe or another compatible GM vehicle? Issues like flickering lights, malfunctioning power windows and locks, a security system that acts up, or random warning messages on your dash are often symptoms of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can cause a wide range of confusing and disruptive problems. This replacement Body Control Module, part number 25847588, is the definitive solution to restore your vehicle’s electronic systems to perfect working order.
Is Your 2010 Tahoe Body Control Module Failing?
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, a replacement module is likely the solution you need:
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors not working correctly.
- ✔ The security system or keyless entry failing intermittently.
- ✔ Unexplained battery drain when the vehicle is off.
- ✔ False warnings on the instrument cluster (e.g., ‘Service Theft System’).
- ✔ Wipers or climate control behaving unpredictably.
Plug & Play Solution with VIN Programming
Forget about expensive dealership visits and additional programming fees. We take the hassle out of the repair. Simply provide us with your vehicle’s VIN during checkout, and our technicians will program this module with the latest GM software specific to your vehicle’s configuration. When you receive the part, it’s ready for installation, making this a true plug-and-play repair. This ensures perfect communication between the new BCM and your vehicle’s other systems. This is the most reliable way to replace your 2010 Tahoe Body Control Module.
Post-Installation Requirements
While this module is pre-programmed, some vehicles may require simple relearn procedures after installation to ensure all systems are perfectly synchronized. These do not require a trip to the dealer for programming but may require a capable scan tool.
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool may be needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: To ensure proper brake light and traction control operation, a brake pedal position sensor recalibration might be necessary on certain models.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment
This BCM is a direct replacement for a wide range of GM vehicles and interchanges with the following part numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084. Please verify your part number before ordering.
Frequently Asked Questions
Do I need to have this BCM programmed by a dealer?
No. We handle all the programming for you before shipment. Simply provide your vehicle’s VIN at checkout, and the module will arrive ready for installation.
What does the Body Control Module (BCM) do?
The BCM acts as the brain for your vehicle’s electronic accessories. It controls functions like power windows, locks, lights, wipers, the security system, and more. When it fails, these systems can become erratic.
Where do I find my vehicle’s VIN?
Your 17-digit Vehicle Identification Number (VIN) can be found on your vehicle’s registration, insurance card, or on a small plate on the driver’s side of the dashboard, visible through the windshield.
What if the airbag light comes on after I install the new BCM?
This can happen occasionally. It means the new BCM needs to be electronically introduced to the airbag system. A technician with a professional diagnostic tool will need to perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve it.
Is there a core charge for this part?
No, there is no core charge. You can keep your original module without needing to send it back.