2010 Tahoe Body Control Module BCM 15872388 Programmed

Is Your 2010 Tahoe Experiencing Strange Electrical Problems?

If you’re dealing with flickering lights, malfunctioning power windows and locks, or random warning lights on your dash, a failing Body Control Module (BCM) is the most likely cause. The BCM acts as the central command center for your vehicle’s body electronics, and when it starts to fail, it can create a host of frustrating and unpredictable issues. Don’t let these electrical gremlins compromise your vehicle’s functionality and safety. This is the reliable, straightforward solution you need.

This module is a direct-fit replacement for your original BCM. We take the hassle out of the repair by pre-programming it to your vehicle’s specific VIN before shipping. This means no expensive trips to the dealership for programming. You’ll receive a part that’s ready for installation right out of the box, loaded with the latest software updates from GM to ensure optimal performance and reliability.

Common Symptoms of a Failing BCM

• ✔ Intermittent or non-working power windows, door locks, or mirrors.
• ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
• ✔ The security or anti-theft system acting up or preventing the vehicle from starting.
• ✔ Unexplained battery drain that leaves you with a dead battery.
• ✔ Dashboard warning lights, such as the airbag light, illuminating for no reason.
• ✔ Horn honking randomly or not working at all.
• ✔ Wipers behaving erratically or not functioning.

Simple Installation and Post-Install Steps

Replacing the 2010 Tahoe Body Control Module is a manageable task for a DIYer with basic tools. The BCM is typically located under the steering column. After the physical swap, some vehicles may require simple relearn procedures to sync all systems. While our programming handles the heavy lifting, be aware of the following potential steps:

• Airbag System Sync: If your airbag light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
• Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure your brake lights and traction control system function correctly.

This module is a guaranteed fit for a wide range of GM vehicles and is a direct replacement for numerous part numbers, including: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.