2010 Tahoe Body Control Module 25826125 | Programmed to Your VIN

Programmed & Ready to Install 2010 Tahoe BCM

Tired of electrical gremlins in your Tahoe? This Body Control Module arrives pre-programmed to your VIN with the latest GM software. It’s the direct-fit solution for fixing faulty power windows, lights, and security systems without a dealer visit. Get your truck back to 100%โ€”order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-1012 Categories: ,
Guaranteed Safe Checkout

Is Your 2010 Tahoe Plagued with Electrical Gremlins?

If your 2010 Chevrolet Tahoe is experiencing a frustrating array of electrical issuesโ€”like flickering dashboard lights, power windows that won’t cooperate, a security system that acts up, or even a vehicle that refuses to startโ€”the culprit is often a failing Body Control Module (BCM). As the central nervous system for your truck’s comfort and convenience features, a faulty BCM can make driving a nightmare. Don’t let confusing symptoms leave you stranded or paying for expensive diagnostic guesswork.

The Direct-Fit, Programmed Solution

This is your straightforward, reliable fix. We offer a genuine GM Body Control Module that comes fully programmed to your Tahoe’s specific Vehicle Identification Number (VIN). Before we ship it, our technicians load it with the latest GM software updates, ensuring it communicates flawlessly with your vehicle’s other systems right out of the box. This eliminates the need for a costly trip to the dealership for programming, saving you time and money.

Expert Pro Tip: Check for Water Intrusion First

In my 20+ years in the shop, one of the most common killers of BCMs in these GM trucks and SUVs is water damage. A customer’s 2010 Tahoe Body Control Module failed, and upon inspection, we found faint water tracks leading from a deteriorated windshield cowl seal directly onto the module’s casing. Before you install your new BCM, take a moment to inspect the area around its mounting location (under the steering column) for any signs of moisture, rust, or corrosion. A simple check now can prevent a repeat failure down the road.

Key Features & Benefits

  • โœ” VIN-Programmed Convenience: Arrives ready to install, pre-loaded with your vehicle’s specific software.
  • โœ” Eliminate Dealer Programming: Skip the expensive and time-consuming appointment at the dealership.
  • โœ” Restore Full Functionality: Get your power locks, windows, interior lights, and security system working like new.
  • โœ” Solve Baffling Electrical Issues: A common fix for intermittent power problems, warning lights, and no-start conditions related to the BCM.
  • โœ” Broad Compatibility: Replaces a wide range of original part numbers, ensuring a perfect match.

Simple Installation Guide

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting work.
  2. Locate the BCM: On your 2010 Tahoe, the BCM is located under the driver’s side dash, near the steering column.
  3. Disconnect and Remove: Carefully unplug the electrical connectors from the old module. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the old BCM and remove it.
  4. Install the New Module: Mount your new, pre-programmed BCM in the same location.
  5. Reconnect: Firmly plug all electrical connectors into the new module until they click into place.
  6. Power Up: Reconnect the negative battery terminal.

Important Final Steps for Full System Integration

After installing your new 2010 Tahoe Body Control Module, a couple of final procedures are required to ensure all systems operate correctly and safely. These steps require a professional-grade scan tool.

  • Airbag System (SRS): To clear the airbag warning light, the ‘Setup SDM Primary Key in BCM’ procedure must be performed. This re-establishes the security handshake between the new BCM and the airbag system’s Sensing and Diagnostic Module (SDM).
  • Brake System: Some vehicles may require a Brake Pedal Position Sensor recalibration. This ensures the brake lights and stability control system receive accurate input from the pedal.

If you are not equipped to perform these steps, we strongly recommend seeking assistance from a qualified automotive technician.

This BCM is a direct replacement for the following part numbers:

10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084

Guaranteed Fitment for a Wide Range of GM Vehicles:

This module fits an extensive list of GM models, including various years of the Acadia, Avalanche, Caprice, Captiva Sport, CTS, DTS, Enclave, Equinox, Express Van, G8, Hummer H2, Impala, Lucerne, Monte Carlo, Outlook, Savana Van, SRX, STS, Suburban, Tahoe, Torrent, Traverse, Vue, and Yukon/Yukon XL. Please verify your specific model and part number for a guaranteed fit.

Genuine OEM

Yes

Condition

Refurbished

MPN

25826125

Interchange part number

PartNumber

591

Model

TAHOE

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top