Are you battling frustrating electrical issues in your 2010 Chevy Tahoe? Flickering lights, unresponsive power windows, or a security system that has a mind of its own are all classic signs of a failing Body Control Module (BCM). As the central command center for your vehicle’s body electronics, a faulty BCM can cause a cascade of confusing problems. I’ve seen it hundreds of times in my shop: a customer comes in with a list of seemingly unrelated electrical gremlins, and the culprit is this single module.
Forget the hassle and expense of a dealership visit. This isn’t just a replacement part; it’s a complete, ready-to-install solution. We offer a professional Cloning Service for this BCM. Here’s how it works: after your purchase, you simply send us your original BCM. We then transfer its unique programming and vehicle-specific data—including key information and security settings—directly to this replacement unit. We also install the latest GM software updates to ensure optimal performance. The result? You receive a module that is 100% plug-and-play for your vehicle. No programming, no special tools, no headaches.
Common Signs of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and interior lights.
- ✔ The security or anti-theft system activates randomly or prevents the vehicle from starting.
- ✔ Dashboard warning lights (like ABS, Airbag, or Traction Control) illuminate for no reason.
- ✔ A/C and climate control systems behaving unpredictably.
- ✔ Communication failure codes, often in the U-series (e.g., U0100, U0140), indicating the BCM is not communicating with other modules.
- ✔ Wipers or radio turning on and off by themselves.
A Technician’s Notebook
I recall a 2010 Yukon XL that came into the bay with a truly baffling issue. The owner said his battery would be dead every few days. We tested the battery and alternator—both were fine. After hours of chasing parasitic draws, we found the BCM wasn’t properly putting other modules to ‘sleep’ when the truck was off. It was a subtle failure with no obvious codes at first. Swapping in a cloned BCM didn’t just fix the draw; it also solved a slow power window issue the owner had forgotten to mention. It’s a perfect example of how a failing BCM can be the hidden root of multiple problems.
A Straightforward Guide to Your BCM Installation
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electrical work.
- ✔ Locate the BCM: On a 2010 Tahoe, the BCM is typically located under the driver’s side of the dashboard, near the steering column. You may need to remove a lower dash panel for access.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- ✔ Install the New Module: Mount your new, cloned BCM in the same location and securely reconnect all electrical connectors. You should hear a ‘click’ as they lock into place.
- ✔ Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position (without starting the engine) and test all body functions: windows, locks, lights, radio, and wipers.
Important Post-Installation Notes
While our cloning service makes this a plug-and-play process, some vehicle systems may require a ‘handshake’ with the new BCM. Please note the following:
- Airbag System Sync: If the airbag warning light is on after installation, a simple ‘Setup SDM Primary Key in BCM’ procedure must be done with a compatible professional scan tool. This is only necessary if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be needed to ensure correct brake light and traction control operation.
Disclaimer: Procedures can vary. Always refer to a factory service manual or a qualified professional if you are unsure.
Verified Vehicle Compatibility
This BCM, part number 15276271, is a direct replacement for a wide range of GM vehicles and interchanges with numerous other part numbers. Please verify your vehicle is on this list and that the location matches. Part numbers this unit replaces include: 10382479, 15093910, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.
- ACADIA 07-12 (LH dash)
- AVALANCHE 1500 10 (under steering column)
- CAPRICE 11-13
- CAPTIVA SPORT 12 (center dash)
- CTS 08-13 (LH or RH dash)
- DTS 06-11 (RH center dash)
- ENCLAVE 08-12 (LH dash)
- EQUINOX 07-09 (center dash)
- ESCALADE / ESV / EXT 10 (under steering column)
- EXPRESS VANS 08-12 (center dash)
- G8 08-09 (center dash)
- HUMMER H2 08-09 (LH firewall)
- IMPALA 06-13 (LH dash)
- LUCERNE 06-11 (right side dash)
- MONTE CARLO 06-07 (LH steering column)
- OUTLOOK 07-10 (center dash)
- SAVANA VANS 08-12 (center dash)
- SRX 07-09 (LH dash)
- STS 10 (center dash)
- SUBURBAN 1500 10 (under steering column)
- TAHOE 10 (under steering column)
- TORRENT 07-09 (center dash)
- TRAVERSE 09-12 (LH dash)
- VUE 08-10 (center dash)
- YUKON / YUKON XL 1500 10 (under steering column)
Frequently Asked Questions
What exactly is a BCM cloning service?
Cloning is a process where we transfer the complete software and vehicle-specific data (like VIN, mileage, and key codes) from your original BCM to the replacement unit. This makes the new module a perfect digital copy, allowing it to work in your vehicle without any additional dealer programming.
Do I need to program this module after I receive it?
No. Because we clone your original module’s data, this part arrives ready for installation. It’s a true plug-and-play solution, designed to save you time and money.
Where is the BCM located on my 2010 Chevy Tahoe?
On the 2010 Tahoe and similar GM SUVs like the Yukon and Escalade, the BCM is found under the driver’s side dashboard, typically attached to a bracket near the steering column.
What is your policy on the original module (the core)?
We require your original module to perform the cloning service. Once the service is complete, we always return your original module to you along with the newly programmed replacement. We do not keep your old part.
Why would my airbag light come on after installation?
The BCM and the airbag system (SDM) are linked for security. Sometimes, swapping the module can break this link, triggering the light. This is easily fixed with a ‘Setup SDM Primary Key’ procedure using a professional scan tool, which re-establishes the connection.