Restore Your Suburban’s Electrical Stability
Are strange electrical gremlins plaguing your 2010 Chevy Suburban? Flickering lights, malfunctioning power windows, or a dashboard that seems to have a mind of its own are classic signs of a failing Body Control Module (BCM). This vital computer is the nerve center for your vehicle’s comfort and convenience features. When it fails, it can make driving frustrating and unpredictable. Get your family’s SUV back to perfect working order with our VIN-programmed BCM, the reliable, direct-fit solution to restore your vehicle’s core electronic functions.
Common Symptoms of a Failing BCM & Your Direct-Fit Solution
A faulty BCM can cause a cascade of confusing issues. If you’re experiencing any of the following, this module is the likely solution:
- Interior or exterior lights not working correctly (staying on, flickering, or not turning on at all).
- Power windows, door locks, or mirrors operating erratically or not at all.
- The security system acting up, or the vehicle not starting due to a security fault.
- Erratic instrument cluster behavior or warning lights that won’t turn off.
- Communication error codes (U-codes) stored in the system.
This isn’t just a replacement part; it’s a complete solution. We take a high-quality, tested module and flash it with the latest official GM software, programmed specifically to your vehicle’s VIN. This means the 2010 Suburban 1500 Body Control Module 15828601 you receive is ready for installation, saving you a costly trip to the dealership for programming.
Features & Benefits
- ✔ VIN-Programmed for Your SUV: We flash the module using your vehicle’s unique VIN before shipping. This critical step ensures it communicates perfectly with your Suburban’s existing systems, eliminating the need for expensive dealership programming.
- ✔ Loaded with Latest GM Software: Your BCM will be updated with the newest software available from the manufacturer, ensuring optimal performance, stability, and compatibility with all vehicle functions.
- ✔ Direct-Fit Replacement: Engineered to be a perfect replacement for a wide range of original part numbers, including 15828601, 25892622, 20815898, and many more, guaranteeing a precise fit.
- ✔ Cost-Effective Repair: Avoid the high labor costs and diagnostic fees of a dealership repair. This is a straightforward solution that a competent DIYer or any independent mechanic can install.
- ✔ Peace of Mind Included: This unit is backed by our one-year replacement warranty.
Expert Insight from a 20-Year Veteran Technician
From over two decades in the shop, I’ve seen countless drivers chase electrical issues for weeks, only to find the BCM was the culprit. The biggest mistake is grabbing a used module from a salvage yard. It won’t have the correct programming for your Suburban’s specific options, leading to more problems than you started with. Our process of programming the module to your exact VIN before shipping is the same procedure a dealership performs, but without the high labor costs and scheduling hassles. This ensures the module communicates correctly with your vehicle’s other computers right out of the box, saving you time, money, and immense frustration.
Important Post-Installation Steps
While this 2010 Suburban 1500 Body Control Module 15828601 is programmed for your vehicle, certain security and safety systems may require a relearn procedure after installation. This is a standard part of the repair process for many modern vehicles. You may need a professional scan tool to perform the following:
- Airbag System Sync (SDM Relearn): If the airbag warning light is on after installation, the ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the new BCM with the airbag system.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be required to ensure proper brake light and traction control functionality.
We provide a fully programmed 2010 Suburban 1500 Body Control Module 15828601 to make your repair as simple as possible. Restore your vehicle’s functionality and drive with confidence again.
Frequently Asked Questions
Do I need to send my old BCM back?
No. There is no core charge for this part. You can keep your original module.
How do I provide my vehicle’s VIN?
After you complete your purchase, you will need to provide us with your 17-digit VIN. You can add it as a note during checkout or reply to your order confirmation email. We cannot program and ship the module without it.
Is this module difficult to install?
On most Suburbans and Tahoes, the BCM is located under the steering column. It is a plug-and-play installation for anyone with moderate mechanical skill. The most important part, the programming, is already done for you.
What happens if my airbag light comes on after installation?
This is normal for some vehicles. It simply means the new BCM needs to be synced with the airbag control module (SDM). A procedure called ‘Setup SDM Primary Key in BCM’ will need to be performed with a professional-grade diagnostic tool to resolve this.
Will this fit other vehicles besides the Suburban?
Yes, this BCM is compatible with a very wide range of GM vehicles, including the Tahoe, Yukon, Escalade, Silverado, Sierra, Express/Savana vans, and more. Please check the detailed fitment list on this page to confirm compatibility with your specific model.