Restore Your GM’s Electrical System with a Plug-and-Play Solution
If your 2010 Chevrolet Suburban 1500 is plagued by bizarre electrical issues—flickering lights, malfunctioning power windows, a stubborn security system, or intermittent starting problems—a failing Body Control Module (BCM) is the likely culprit. As the central command center for your vehicle’s body electronics, a faulty BCM can turn your reliable SUV into a source of constant frustration. Stop chasing electrical gremlins and get a definitive fix. This replacement BCM, programmed specifically for your vehicle via our expert cloning service, is the most efficient and reliable way to restore full functionality and peace of mind.
Our unique Cloning Service makes this repair accessible to both DIY enthusiasts and professional technicians. Instead of paying for expensive dealership programming and waiting for appointments, you simply send us your original BCM. We transfer its exact data—including key programming and vehicle-specific options—to this replacement unit. The module you receive back is a true plug-and-play solution, ready for installation right out of the box. This process ensures seamless integration with your vehicle’s existing systems, saving you significant time, money, and hassle.
A Technician’s Notebook: The Case of the Haunted Suburban
A customer brought in their 2010 Suburban with a list of complaints that sounded like something out of a ghost story. The dome lights would flicker randomly, the radio would shut off, and occasionally, the truck wouldn’t start, displaying a ‘Service Theft Deterrent System’ message. They’d already replaced the battery and checked the alternator. My initial scan showed a flurry of U-codes (communication loss) pointing to the BCM. After popping the dash panel, I found the original BCM. Experience has taught me that on these GMT900 platforms, moisture intrusion or simple internal solder joint failure is common. We performed a BCM clone, and the customer had their truck back the same afternoon, completely free of its ‘ghosts.’ This is a classic BCM failure I’ve diagnosed and solved hundreds of times.
Is Your Vehicle Showing These Symptoms?
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, this module is your solution:
- ✔ Erratic power windows, door locks, or mirrors
- ✔ Interior or exterior lights that don’t work correctly or stay on
- ✔ Horn honking unexpectedly or not working at all
- ✔ ‘Service Theft Deterrent System’ or other security-related warnings
- ✔ Intermittent no-start or crank-no-start conditions
- ✔ Communication error codes with other modules (e.g., U0100, U0140)
- ✔ Malfunctioning radio or climate controls
A Straightforward Guide to Installation
Installing your cloned 2010 Suburban 1500 BCM is a simple process that requires basic hand tools and about 30-60 minutes.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any electrical work.
- Locate the BCM: On the 2010 Suburban, the BCM is typically located under the driver’s side of the dashboard, to the left of the steering column. You may need to remove a lower dash panel for access.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New Module: Mount your new, cloned BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
- Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all functions: lights, windows, locks, radio, etc., to confirm the repair was successful.
Post-Installation Checks
While our cloning service makes this a plug-and-play repair, some GM vehicles may require a simple relearn procedure after the new BCM is installed.
- Airbag System Sync: If the airbag light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This syncs the airbag system with the new BCM and requires a professional-grade scan tool.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure proper brake light and traction control operation.
Disclaimer: Vehicle systems vary. Always refer to a factory service manual or consult a certified technician if you are unsure about any step.
Will This Fit My Vehicle?
This BCM is a direct-fit replacement for a wide range of General Motors vehicles. Please verify that your vehicle and original part number are listed below. This module is compatible with part numbers:
10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20839063, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, 95151084
AVALANCHE 1500 10
CAPRICE 11-13
CAPTIVA SPORT 12
CTS 08-13
DTS 06-11
ENCLAVE 08-12
EQUINOX 07-09
ESCALADE 10
ESCALADE ESV 10
ESCALADE EXT 10
EXPRESS 1500 VAN 08-12
EXPRESS 2500 VAN 08-12
EXPRESS 3500 VAN 08-12
G8 08-09
HUMMER H2 08-09
IMPALA 06-13
LUCERNE 06-11
MONTE CARLO 06-07
OUTLOOK 07-10
SAVANA 1500 VAN 08-12
SAVANA 2500 VAN 08-12
SAVANA 3500 VAN 08-12
SRX 07-09
STS 10
SUBURBAN 1500 10
TAHOE 10
TORRENT 07-09
TRAVERSE 09-12
VUE 08-10
YUKON 10
YUKON XL 1500 10
Frequently Asked Questions
What exactly is a BCM cloning service?
What exactly is a BCM cloning service?
Our cloning service is a process where we transfer the vital, vehicle-specific configuration and security data from your original BCM to the replacement unit. This makes the new module a ‘clone’ of your old one, allowing it to work in your vehicle without any additional programming or dealer intervention.
Do I have to send my original BCM to you?
Yes. For the cloning service to work, we need your original module to extract the data. After we program the replacement unit, we will ship both your original module and the newly programmed replacement back to you.
Is this a guaranteed fix for my vehicle’s electrical problems?
If your vehicle’s symptoms match those of a common BCM failure and a professional diagnosis has confirmed the BCM is the fault, then this module is the correct repair. A BCM controls many systems, so it’s a very common point of failure for a wide range of electrical issues.
What tools will I need for the installation?
Installation typically requires only basic hand tools, such as a socket set (for the battery terminal and module mounting bolts) and possibly a trim removal tool to safely take off any plastic dash panels without scratching them.
What if my key fob doesn’t work after installation?
Our cloning process transfers all key fob data, so they should work immediately. In the rare event they don’t, your vehicle may require a simple on-board key fob relearn procedure, which can be found in your owner’s manual or online and typically takes less than two minutes to perform.