2010 STS Body Control Module BCM 20839063 | Cloning Service

End Your Vehicle’s Electrical Gremlins

Tired of flickering lights, a dead instrument cluster, or a car that won’t start? This Body Control Module is the solution. It comes fully programmed to your vehicle’s VIN, eliminating the need for expensive dealership programming. Restore your 2010 Cadillac STS’s electronics and get back on the road with confidence. Order today for a plug-and-play fix!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01465-786 Categories: ,
Guaranteed Safe Checkout

Restore Full Functionality to Your GM Vehicle

If you’re dealing with bizarre electrical issues in your 2010 Cadillac STS—like power windows with a mind of their own, dashboard lights flickering randomly, or a security system that prevents the car from starting—the Body Control Module (BCM) is the most likely culprit. As the central command center for your vehicle’s body electronics, a failing BCM can cause a cascade of frustrating and hard-to-diagnose problems. This isn’t just an annoyance; it can affect vehicle safety and security. This listing offers a dependable, streamlined solution: a replacement BCM programmed specifically for your vehicle’s VIN.

Case Study: A Tricky Diagnosis

I recently had a 2010 Cadillac CTS in the shop with a classic BCM failure case. The customer complained of intermittent no-start conditions and the radio turning on and off by itself. A basic scan showed a dozen communication codes (U-codes), pointing to a network issue. Instead of chasing ghosts in the wiring for hours, my experience pointed straight to the BCM. Water intrusion from a leaky cowl seal had caused corrosion on the main connector. By replacing the faulty unit with a VIN-programmed module like this one, we had the car running perfectly in under an hour, saving the customer hundreds in diagnostic time and dealership programming fees. This is a common failure point I’ve seen on over 100 GM vehicles of this era.

Is Your Vehicle Exhibiting These BCM Failure Symptoms?

A failing Body Control Module can manifest in numerous ways. If you’re noticing any of the following, it’s a strong indicator that your BCM needs attention. A proper diagnosis with a professional scan tool can confirm the issue, often revealing codes like U0140, B1001, or other communication and internal module faults.

  • ✔ Intermittent or non-functional power windows, door locks, or interior lights.
  • ✔ The security or anti-theft system light stays on, preventing the engine from starting.
  • ✔ Erratic behavior from the instrument cluster gauges or warning lamps.
  • ✔ Headlights or taillights not working correctly, even with good bulbs.
  • ✔ Key fob not responding or intermittent remote start failure.
  • ✔ False warnings for tire pressure, traction control, or other systems.
  • ✔ A flurry of network communication DTCs (U-codes) stored in various modules.

Your Straightforward BCM Installation Guide

Installing your new BCM is a manageable task for a confident DIYer or any professional technician. Our VIN programming service makes this process significantly easier than installing a blank module from the dealer.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait at least 10 minutes to allow all modules to power down completely.
  2. Locate the BCM: On the 2010 Cadillac STS, the BCM is typically located in the center dash area. For other models, it may be under the steering column or behind the dash on the driver’s or passenger’s side. Consult your service manual for the exact location.
  3. Remove the Old Module: Carefully unplug the electrical connectors. Most have a locking tab that needs to be depressed or a lever that needs to be swung over to release the connector. Once disconnected, unbolt or unclip the old BCM and remove it from the vehicle.
  4. Install the New Module: Mount the new, pre-programmed BCM in the same location and securely reconnect all electrical connectors. Ensure they click into place.
  5. Reconnect the Battery: Reattach the negative battery terminal.
  6. Perform Post-Install Procedures: Start the vehicle and check for proper function of all body electronics. As noted below, some vehicles may require a ‘Brake Pedal Position Relearn’ or an ‘Airbag System Sync’ with a capable scan tool to clear specific warning lights.

Important Post-Installation Information

Important Post-Installation Information

This BCM is sold as a Cloning Service. We program the module with the latest GM software updates using the VIN you provide, ensuring compatibility. Your original module will be returned to you along with the replacement.

Verified Fitment for Your General Motors Vehicle

This module is a direct replacement for a wide range of GM cars, trucks, and SUVs. Please verify your part number is on this list. This unit is compatible with part number 20839063 and the following interchangeable numbers: 10382479, 15093910, 15276271, 15299986, 15819552, 15828601, 15837419, 15872388, 15872421, 15880684, 15921352, 15921353, 15948438, 15948439, 20815898, 20864767, 20864768, 20921435, 20921436, 20935349, 22860591, 25826124, 25826125, 25847588, 25847589, 25892622, 25910474, 25934762, 25934763, and 95151084.

Fits Models Including:

  • ACADIA 07-12
  • AVALANCHE 1500 10
  • CAPRICE 11-13
  • CAPTIVA SPORT 12
  • CTS 08-13
  • DTS 06-11
  • ENCLAVE 08-12
  • EQUINOX 07-09
  • ESCALADE / ESV / EXT 10
  • EXPRESS VANS (1500/2500/3500) 08-12
  • G8 08-09
  • HUMMER H2 08-09
  • IMPALA 06-13
  • LUCERNE 06-11
  • MONTE CARLO 06-07
  • OUTLOOK 07-10
  • SAVANA VANS (1500/2500/3500) 08-12
  • SRX 07-09
  • STS 10
  • SUBURBAN 1500 10
  • TAHOE 10
  • TORRENT 07-09
  • TRAVERSE 09-12
  • VUE 08-10
  • YUKON / YUKON XL 1500 10

Frequently Asked Questions

Frequently Asked Questions

Important Post-Installation Information

This BCM is sold as a Cloning Service. We program the module with the latest GM software updates using the VIN you provide, ensuring compatibility. Your original module will be returned to you along with the replacement.

Genuine OEM

Yes

Condition

Refurbished

MPN

20839063

Interchange part number

PartNumber

591

Model

STS

Year

2013

Brand

GM

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Scroll to Top