2010 Saturn Outlook ECM 19300014 Programmed to Your VIN

Stalling or No-Start in Your 2010 Saturn Outlook?

This is the solution. A professionally programmed ECM, flashed to your vehicle’s VIN with the latest GM software. It’s a direct-fit replacement for part 19300014, solving common engine problems. Get back on the road fast—order yours today!

$249.00

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01766-34 Categories: ,
Guaranteed Safe Checkout

Is Your 2010 Saturn Outlook Acting Unpredictable?

If you’re dealing with a 2010 Saturn Outlook, or a similar GM 3.6L vehicle like an Acadia or Traverse, that’s suddenly developed a mind of its own, you’re likely staring at a failing Engine Control Module (ECM). In my 20+ years turning wrenches and diagnosing these exact platforms, the symptoms are almost always the same: it starts with frustrating intermittent issues that quickly escalate into a full-blown no-start condition, leaving you stranded.

You might be experiencing:

  • ✔ An engine that cranks but refuses to fire up.
  • ✔ The vehicle stalling unexpectedly while driving, especially after it’s warmed up.
  • ✔ A check engine light with communication error codes (U-codes) that point to a loss of communication with the ECM.
  • ✔ Erratic transmission shifting or other strange electronic behavior.
  • ✔ Fuel pump not priming or injectors not firing, even with good fuses and relays.

The ECM is the brain of your vehicle’s engine operations. When it fails, it can’t properly manage fuel, spark, and timing, leading to the severe drivability problems you’re seeing. These modules, often mounted behind the fan shroud, are subjected to intense heat cycles and vibration, which eventually leads to internal circuit board and component failure.

Expert Pro Tip: Diagnosing a Dead ECM

Before condemning the ECM, a good technician always verifies the essentials. I’ve seen hundreds of these cases. First, check all power and ground connections directly at the ECM connector. A corroded ground wire can mimic a failed module. If powers and grounds are solid, the next step is to connect a professional scan tool. If the scan tool cannot communicate with the ECM but can talk to other modules on the vehicle (like the BCM or TCM), it’s a strong indicator that the ECM itself is the culprit. You’ll often find U-codes like U0100 (Lost Communication With ECM/PCM) stored in other modules. This simple diagnostic step can save you from replacing perfectly good parts.

The Dealership-Free Solution: A VIN-Programmed ECM

In the past, replacing an ECM meant towing your vehicle to a dealership for an expensive new part and even more expensive programming. We’ve eliminated that hassle. This ECM is the direct, reliable solution to get your vehicle running properly again. We take a genuine, tested ECM and flash it with the absolute latest software updates from General Motors, programmed specifically to your vehicle’s unique Vehicle Identification Number (VIN).

This isn’t just a replacement; it’s a restoration of proper function. The updated software often resolves underlying drivability quirks that may have existed from the factory. The result is a module that is truly plug-and-play, ready for installation right out of the box.

Our Simple, Professional Process

  1. You purchase this ECM.
  2. You provide us with your vehicle’s 17-digit VIN during checkout or by sending us a message.
  3. Our technicians program the module with the latest GM calibration for your exact vehicle.
  4. We ship the ready-to-install ECM directly to you.

Important Note for Chevrolet Camaro & Buick LaCrosse Owners:

For these specific models, the factory anti-theft (immobilizer) system is more complex. To ensure a true plug-and-play installation, we require you to send us your original ECM. We will professionally extract the unique immobilizer data and transfer it to your new module. This critical step prevents a no-start condition after installation and saves you a trip to the dealer. We will contact you with shipping instructions for your old module after your purchase.

Guaranteed Compatibility

This module is a direct replacement for several part numbers. Please verify the number on your existing module to ensure a perfect match.

  • ✔ Compatible Part Numbers: 19300015, 19300014, 12617230, 12636355, 12635019
  • ✔ Fits These 3.6L Models:
  • ✔ 2010-2011 Buick LaCrosse
  • ✔ 2010-2011 Chevrolet Traverse
  • ✔ 2010-2011 Cadillac CTS
  • ✔ 2010-2011 Chevrolet Camaro
  • ✔ 2010 Saturn Outlook
  • ✔ 2010 Buick Allure
  • ✔ 2010-2011 Buick Enclave
  • ✔ 2010-2011 GMC Acadia
  • ✔ 2010-2011 Cadillac STS

Don’t let a faulty ECM keep your vehicle off the road. Order this professionally programmed module today and restore your vehicle’s performance and reliability with confidence.

Condition

Refurbished

MPN

19300014

Genuine OEM

Yes

Hardware Type

Year

2010

Model

OUTLOOK

Brand

GM

Interchange part number

Manufacturer Part Number

, , , ,

Scroll to Top